Introducció
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your PERLESMITH Universal TV Cart (PSTVMC06) and Perlegear Floor TV Stand (PGFS21B). These products are designed to enhance your viewing experience by providing flexible and stable solutions for mounting your television. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
Informació de seguretat
Always observe the following safety precautions to prevent personal injury or property damage:
- Do not exceed the maximum load capacity specified for each stand. Overloading can cause instability and potential injury.
- Ensure all screws and bolts are securely tightened before use. Periodically check for loose connections.
- Keep children and pets away from the stands during assembly and operation.
- Install the TV stands on a stable, level surface to prevent tipping.
- Use only the provided hardware or manufacturer-approved replacement parts.
- Si falta alguna peça o està danyada, no intenteu muntar ni utilitzar el producte. Poseu-vos en contacte amb el servei d'atenció al client immediatament.
- For the PGFS21B, ensure power cables for the LED lights are routed safely to avoid tripping hazards or damage.
Contingut del paquet
Please verify that all components are present and undamaged before beginning assembly. Refer to the parts list included in the packaging for a detailed inventory. If any parts are missing or defective, please contact PERLESMITH customer service.
Muntatge i muntatge
Assembly typically requires two people. Ensure you have adequate space and the necessary tools (e.g., screwdriver, wrench) before starting.
PERLESMITH Universal TV Cart (PSTVMC06) Assembly
This mobile TV cart is designed for easy relocation and optimal viewflexibilitat.
- Muntar la base: Attach the four caster wheels to the base legs. Ensure the locking casters are positioned as desired for stability.
- Connecteu el pal principal: Securely fasten the main vertical pole to the assembled base.
- Install the TV Mounting Bracket: Attach the TV mounting bracket to the top of the main pole. Ensure it is oriented correctly for your television's VESA pattern.
- Muntar el prestatge: Install the accessory shelf at your desired height on the main pole.
- Attach TV Rails to TV: Secure the vertical TV rails to the back of your television, aligning with its VESA mounting holes.
- Hang TV on Cart: Carefully lift and hang the television onto the cart's mounting bracket. Secure it with the safety screws or clips provided.
Image: The PERLESMITH Universal TV Cart (PSTVMC06) fully assembled, showing a television mounted and a laptop on the adjustable shelf. This cart features a sturdy base with lockable wheels for mobility.
Image: The PERLESMITH Universal TV Cart (PSTVMC06) in an office environment, demonstrating its use for presentations or collaborative work. The cart's mobility allows it to be easily moved between rooms.
Perlegear Floor TV Stand (PGFS21B) Assembly
This floor stand offers a stable base with integrated LED lighting and multiple viewajustos.
- Muntar la base: Attach the main pillar to the sturdy floor base.
- Instal·leu prestatgeries: Secure the upper and lower shelves to the main pillar at your preferred heights.
- Fixeu els suports de muntatge del televisor: Fasten the TV mounting brackets to the main pillar. These brackets allow for height and angle adjustments.
- Attach TV Rails to TV: Secure the vertical TV rails to the back of your television, ensuring they align with the VESA mounting holes.
- Hang TV on Stand: Carefully lift and hang the television onto the stand's mounting brackets. Secure it with the safety screws or clips provided.
- Connecteu els llums LED: Connect the LED light strips to the designated ports and route the power cable safely.
Image: The Perlegear Floor TV Stand (PGFS21B) with a television mounted, showcasing its integrated RGB LED ambient lighting. The stand includes multiple shelves for media devices.
Imatge: Una imatge detallada view of the Perlegear Floor TV Stand (PGFS21B) highlighting its wide compatibility for TV sizes from 32" to 75", maximum load capacity of 110 lbs, and various supported VESA patterns. Key dimensions are also shown.
Instruccions de funcionament
PERLESMITH Universal TV Cart (PSTVMC06)
- Mobilitat: Unlock the casters to move the TV cart to your desired location. Lock the casters to secure the cart in place.
- Ajust d'alçada: The TV mounting bracket can be adjusted vertically along the main pole to achieve optimal viewing height. Refer to the assembly instructions for specific adjustment points.
- Ajust d'inclinació: The TV mounting bracket allows for an upward tilt adjustment of up to 15 degrees to reduce glare and improve viewing angles. Loosen the tilt knobs, adjust the angle, and re-tighten securely.
- Ajust de prestatge: The accessory shelf can be repositioned along the main pole to accommodate various devices such as laptops, media players, or gaming consoles.
Image: The PERLESMITH Universal TV Cart (PSTVMC06) demonstrating its tilt adjustment feature, allowing the screen to be angled up or down for optimal viewing, such as when exercising on a treadmill.
Perlegear Floor TV Stand (PGFS21B)
- Ajust d'alçada: The stand offers 12 levels of height adjustment for the TV, including adjustments for the main pillar, panel, and mounting brackets. This allows you to find the perfect viewalçada.
- Ajust d'inclinació: The TV can be tilted from -10° (downward) to +5° (upward) to minimize glare and optimize viewing comfort from various seating positions. Loosen the tilt mechanism, adjust, and re-tighten.
- Ajust de gir: The TV can swivel up to ±35° (left or right), providing flexible viewing angles for different areas of a room.
- Control de llum LED: The integrated RGB LED ambient lighting can be controlled via three methods:
- Aplicació mòbil: Download the dedicated app to access 16 million colors, brightness, speed, and mode settings, including music sync and timer functions.
- Comandament a distància: Use the included remote to change colors, modes, and brightness.
- Interruptor per cable: A simple wired switch provides basic control over the lights.
Image: The Perlegear Floor TV Stand (PGFS21B) illustrating its customizable LED lighting features, including 16 million colors, dynamic modes, music sync, and timing functions. It also shows the three control options: mobile app, remote control, and in-line switch.
Manteniment
Regular maintenance ensures the longevity and safe operation of your TV stands.
- Neteja: Wipe surfaces with a soft, dry cloth. For stubborn marks, use a slightly damp cloth with mild detergent, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Comprovació de maquinari: Inspeccioneu periòdicament tots els cargols, perns i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Caster Maintenance (PSTVMC06): Keep caster wheels free of dust and debris to ensure smooth movement.
- LED Lights (PGFS21B): Ensure the LED strips are clean and free from obstructions. Do not attempt to disassemble the LED components.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Stand is unstable/wobbles. | Connexions soltes; terra irregular; sobrecàrrega. | Ensure all bolts are tightened. Move to a level surface. Do not exceed weight capacity. |
| El televisor no encaixa al suport. | Incorrect VESA pattern; TV size too large/small. | Verify your TV's VESA pattern and size against the stand's specifications. |
| PSTVMC06 casters not rolling smoothly. | Debris in wheels; casters locked. | Clean wheels. Unlock casters. |
| PGFS21B LED lights not working. | Power not connected; remote battery dead; app issue. | Check power connection. Replace remote battery. Restart app/device. |
Especificacions
PERLESMITH Universal TV Cart (PSTVMC06)
- Mides de TV compatibles: 23" to 60" LCD/LED/OLED Flat/Curved screens
- Compatibilitat VESA: 100x100mm (4"x4") to 400x400mm (16"x16")
- Ajust d'inclinació: Up to 15° upward angle
- Mobilitat: Rolling casters (lockable)
Perlegear Floor TV Stand (PGFS21B)
- Mides de TV compatibles: 32" a 75"
- Capacitat de càrrega màxima: 110 lliures (50 kg)
- Compatibilitat VESA: 600x400mm, 600x200mm, 400x400mm, 400x300mm, 400x200mm, 300x300mm, 200x300mm, 200x200mm, 200x100mm, 100x100mm
- Ajust d'alçada: 12 levels (pillar, panel, brackets)
- Ajust d'inclinació: -10° a +5°
- Ajust de gir: ±35°
- Il·luminació: RGB LED ambient lighting (16 million colors, dynamic modes, music sync, timer)
- Opcions de control: Mobile App, Remote Control, Wired Switch
Garantia i Suport
PERLESMITH products are manufactured with quality and durability in mind. For information regarding warranty coverage, technical support, or replacement parts, please visit the official PERLESMITH weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
Podeu trobar més informació i dades de contacte a PERLESMITH Store on Amazon.
