WAC Lighting R2DRDN-F9CS-WT

WAC Lighting Ion 2in LED Round Recessed Light Instruction Manual

Model: R2DRDN-F9CS-WT

Introducció

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting Ion 2in LED Round Recessed Light. Please read this manual thoroughly before installation and retain it for future reference.

Informació important de seguretat

  • ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
  • ADVERTIMENT: Risk of fire. Use only with specified dimmers.
  • Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
  • Assegureu-vos que totes les connexions elèctriques estiguin segures i correctament aïllades.
  • No modifiqueu l'aparell. Qualsevol modificació pot anul·lar la garantia i crear riscos per a la seguretat.
  • Suitable for wet locations, IC-Rated for direct contact with insulation, and Airtight.
  • Vol. Operatiutage: 120V-277V AC.

Contingut del paquet

Confirm all components are present before beginning installation.

  • LED Light and Trim
  • LED Driver and Cable
  • Housing or Frame-in Kit (New Construction)
  • Paquet de maquinari de muntatge
  • Manual d'instruccions (aquest document)

Configuració i instal·lació

This section outlines the steps for installing your WAC Lighting Ion recessed light. A frame-in kit is included for new construction installations.

1. Prepareu la zona d'instal·lació

Ensure power is disconnected at the circuit breaker. Identify the desired location for the fixture. This fixture requires a 3-inch round ceiling cutout. The ceiling thickness should be between 0.5 inches and 1.5 inches.

Diagram showing dimensions for the WAC Lighting Ion recessed light frame-in kit and driver box.

This image displays a technical diagram with dimensions for the frame-in kit and the driver box. It shows the overall length of the frame-in kit, the cutout size, and the dimensions of the external driver box, including its height and width.

2. Install the Frame-in Kit (New Construction)

Position the frame-in kit in the ceiling joists. Secure the frame-in kit using appropriate mounting hardware. The adjustable bars allow for flexible positioning between joists.

Explotat view of WAC Lighting Ion recessed light components including frame-in kit, driver box, and light engine.

This image illustrates the main components of the WAC Lighting Ion recessed light: the metal frame-in kit, the separate driver box with wiring, and the round LED light engine with retention clips. It shows how the driver box connects to the light engine and how the frame-in kit supports the entire assembly.

3. Connexió elèctrica

The driver box includes 5 knockouts for electrical connections. Connect the universal input driver (120V-277V) to the main power supply according to local electrical codes. Use the male-to-female quick connect locking cable to join the light engine to the driver box.

4. Install the Light Engine

Once the frame-in kit is secured and electrical connections are made, insert the LED light engine into the 3-inch ceiling cutout. The retention clips on the light engine will hold it securely in place.

Instruccions de funcionament

1. Encès

Restore power at the circuit breaker. The light should illuminate.

2. 5-CCT Selectable Color Temperature

The Ion fixture features a 5-CCT selectable switch located on the driver box. Before final installation of the light engine, select your desired color temperature from the following options: 2700K, 3000K, 3500K, 4000K, or 5000K. Adjust the switch to the preferred setting.

Image showing the 5-CCT selectable switch on the WAC Lighting Ion recessed light driver box.

This image highlights the 5-CCT (Correlated Color Temperature) selectable switch, typically found on the driver box. It shows the different Kelvin temperature options (2700K, 3000K, 3500K, 4000K, 5000K) that can be chosen by sliding the switch.

3. Funcionalitat de regulació de la intensitat

This fixture is compatible with electronic low voltage (ELV) or TRIAC dimmers. It provides smooth and continuous dimming. With ELV dimmers, it dims down to 10%, and with TRIAC dimmers, it dims down to 5%.

Manteniment

  • Ensure power is off before performing any maintenance.
  • Netegeu l'aparell amb un drap suau i sec. No utilitzeu netejadors abrasius ni dissolvents.
  • The LED module is replaceable, with a rated life of 50,000 hours. Contact WAC Lighting for replacement parts if needed.

Resolució de problemes

Problema Causa possible Solució
La llum no s’encén. Sense font d'alimentació.
Connexió de cablejat solta.
Interruptor o regulador d'intensitat defectuós.
Comproveu l'interruptor de circuit i l'interruptor de paret.
Comproveu que totes les connexions dels cables siguin segures.
Test with a known working switch or bypass the switch temporarily.
La llum parpelleja o s'atenua de manera inconsistent. Regulador d'intensitat incompatible.
Cablejat solt.
Circuit sobrecarregat.
Ensure dimmer is ELV or TRIAC compatible.
Comproveu totes les connexions de cablejat.
Reduce load on the circuit or consult an electrician.
Temperatura de color incorrecta. L'interruptor CCT està mal configurat. Turn off power, access the driver box, and adjust the 5-CCT selectable switch to the desired setting.

Especificacions

  • Model: R2DRDN-F9CS-WT
  • Marca: Il·luminació WAC
  • Tipus: 2in LED Round Recessed Light
  • Potència: 9W
  • Lúmens lliurats: 725 lm
  • CRI: 90
  • Hores qualificades: 50,000
  • Temperatura de color: 5-CCT Selectable (2700K, 3000K, 3500K, 4000K, 5000K)
  • Voltage: 120V-277V Universal
  • Dimecres: ELV (to 10%), TRIAC (to 5%)
  • Mida del tall: 3 polzades (rodons)
  • Gruix del sostre: 0.5 polzades a 1.5 polzades
  • Material: Die-cast aluminum with 20-gauge steel driver box
  • Certificacions: ETL & cETL UL #1598, IC-Rated, Airtight, CEC Title 24 Compliant, Energy Star 2.0 Certified, Title 24 JA8-2016
  • Ús interior/exterior: Indoor, Outdoor (Wet Location Listed)
  • Dimensions del producte: 12.4"L x 10.43"W x 4.25"H (Frame-in kit and driver box)

Garantia i Suport

This WAC Lighting product is covered by a 5-year manufacturer's warranty. For warranty claims or technical support, please contact WAC Lighting customer service. Retain your proof of purchase for warranty validation.

For additional information or support, visit the official WAC Lighting weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

WAC Lighting is a registered trademark. All rights reserved.

Documents relacionats - R2DRDN-F9CS-WT

Preview Instruccions d'ús del control remot del ventilador intel·ligent WAC RCUV-WT
Guia completa per al funcionament del comandament a distància intel·ligent WAC RCUV-WT, que cobreix l'emparellament, el funcionament del ventilador i la llum, el mode brisa, l'apagada automàtica dels UV, la configuració del Wi-Fi i la resolució de problemes.
Preview Instruccions d'instal·lació de la passarel·la de malla WAC WH-GW1-WT
Instruccions d'instal·lació per a la passarel·la de malla WAC WH-GW1-WT, que inclouen informació sobre l'alimentació, la configuració i el compliment de la normativa de la FCC.
Preview Guia d'instal·lació de la llum de cinta LED RGBWW per a exteriors InvisiLED de WAC Lighting (T24-OD1-XX-CC)
Aquest document proporciona instruccions d'instal·lació completes per al sistema de llum de cinta LED RGBWW per a exteriors WAC Lighting InvisiLED, model T24-OD1-XX-CC. Cobreix les precaucions de seguretat essencials, els diagrames de cablejat, els càlculs de potència, les longituds màximes de recorregut i diversos mètodes de muntatge i connexió per a ús a l'aire lliure.
Preview WAC Lighting Tesla 3" LED New Construction Housing Installation Guide
Installation instructions for the WAC Lighting Tesla 3" LED New Construction Housing, including safety, overview, housing installation steps, and wiring diagrams. Compatible with HR-3LED-H18D1, HR-3LED-H22D, and HR-3LED-H15D models.
Preview Guia d'instal·lació de guarnició invisible per a carcassa de remodelació ajustable en blanc de 2" de WAC Lighting Volta
Aquest document proporciona instruccions d'instal·lació completes per a la carcassa invisible WAC Lighting Volta de 2" amb acabat blanc ajustable, números de model R2RRL i R2SRL. Inclou precaucions de seguretat essencials, requisits d'instal·lació, dades dimensionals, especificacions tècniques i una guia detallada pas a pas per a una configuració correcta.
Preview WAC LOTOS R 6" Retrofit LED Downlight Installation Guide (R6DRAK)
Comprehensive installation instructions for the WAC Lighting LOTOS R 6" Retrofit LED downlight (model R6DRAK). Learn how to safely install and set color temperature for this recessed lighting fixture.