AMETEK Brookfield Small Sample Adapter SSA 18/13R Instruction Manual

Introducció

This manual provides essential instructions for the proper setup, operation, and maintenance of the AMETEK Brookfield Small Sample Adapter, model SSA 18/13R. This adapter is specifically designed for use with Brookfield Viscometer Models 98945-00 and 98945-05 to accurately measure the viscosity of low fluid volumes, typically between 8 to 13 mL. Adherence to these instructions will ensure optimal performance and longevity of the equipment.

Producte acabatview

Figura 1: Components of the AMETEK Brookfield Small Sample Adapter SSA 18/13R. This image displays the main viscometer unit with its stand, a black cylindrical water jacket attached to the viscometer shaft, two silver cylindrical sample chambers, and four different conical spindles. The water jacket features two barbed fittings for connecting to an external circulating bath.

The Small Sample Adapter system comprises a specialized sample chamber and a set of spindles, designed to work in conjunction with compatible Brookfield viscometers. It includes a water jacket for precise temperature control, which is crucial for accurate viscosity measurements. The adapter allows for easy installation and removal of the sample chamber without disrupting the viscometer or the circulating bath.

Instruccions de configuració

1. Desembalatge i inspecció: Carefully unpack all components. Verify that all parts listed in the packing list are present and undamaged. Report any discrepancies or damage to your supplier immediately.
2. Viscometer Preparation: Ensure your Brookfield Viscometer (Models 98945-00 or 98945-05) is securely mounted on its stand and leveled.
3. Instal·lació de l'adaptador: Attach the Small Sample Adapter's water jacket assembly to the viscometer as per the viscometer's primary instruction manual for accessory installation. Ensure it is firmly seated.
4. Sample Chamber Placement: Insereix el s adequatample chamber into the water jacket. Ensure it is clean and dry before use.
5. Temperature Control Connection: Connect an external circulating water bath (not included) to the inlet and outlet ports of the adapter's water jacket using appropriate tubing. Ensure secure connections to prevent leaks. The adapter operates within a temperature range of 5°F to 212°F (-15°C to 100°C).
6. Spindle Selection: Choose the appropriate spindle for your expected viscosity range. Refer to the viscometer's manual for guidance on spindle selection.

Procediments operatius

1. SampPreparació: Prepara el teu sample fluid. The required sample volume is typically 8 to 13 mL. Ensure the sample is homogeneous and free of air bubbles.
2. Estabilització de la temperatura: Pour the prepared sample al sample chamber. Allow sufficient time for the sample to reach the desired test temperature, as controlled by the external circulating bath. Temperature stability is critical for accurate measurements.
3. Spindle Attachment: Carefully attach the selected spindle to the viscometer's coupling. Lower the viscometer head until the spindle is immersed in the sample to the designated mark. Avoid trapping air bubbles under the spindle.
4. Viscometer Operation: Turn on the viscometer and select the appropriate speed setting. Allow the reading to stabilize before recording the viscosity value.
5. Gravació de dades: Record the viscosity reading, temperature, spindle number, and speed.
6. Sample Chamber Removal: El sample chamber can be easily installed or removed without disturbing the operation of the viscometer or the circulating bath, allowing for efficient sample changes.

Manteniment

• Neteja: After each use, thoroughly clean the sample chamber and spindle with an appropriate solvent for your sample material. Rinse with distilled water and dry completely. The sample chamber is made of Borosilicate Glass.
• Water Jacket: Periodically inspect the water jacket and tubing for any signs of leaks or blockages. Flush with distilled water if necessary.
• Emmagatzematge: Store the adapter components in a clean, dry environment when not in use. Protect spindles from damage.
• Calibració: Regular calibration of your viscometer and verification of the adapter's performance with certified viscosity standards are recommended to ensure accuracy.

Resolució de problemes

Si teniu problemes durant el funcionament, tingueu en compte els següents problemes i solucions habituals:

• Lectures inexactes:
  • Assegureu-vos que el sample temperature is stable and uniform.
  • Verify the correct spindle is used and properly immersed.
  • Check for air bubbles in the sample.
  • Confirm the viscometer is level and calibrated.
• Problemes de control de temperatura:
  • Check connections to the external circulating bath for leaks or blockages.
  • Ensure the circulating bath is operating correctly and set to the desired temperature.
• Spindle Not Rotating:
  • Verify the spindle is correctly attached to the viscometer.
  • Check the viscometer's power and settings.

For persistent issues, refer to your main viscometer manual or contact AMETEK Brookfield technical support.

Especificacions

Informació de la garantia

The AMETEK Brookfield Small Sample Adapter SSA 18/13R is covered by a 1-year Universal Guarantee from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the documentation provided with your original purchase or contact AMETEK Brookfield customer service.

Suport i Contacte

For technical assistance, service, or inquiries regarding the AMETEK Brookfield Small Sample Adapter, please contact AMETEK Brookfield customer support. Please have your model number (SSA 18/13R) and viscometer model ready when contacting support.

• Fabricant: AMETEK Brookfield
• Weblloc: www.brookfieldengineering.com (Note: This is a generic example, actual link may vary.)
• Atenció al client: Refer to the official AMETEK Brookfield weblloc web per obtenir informació de contacte actualitzada.