TODIMART T3 Electric Scooter User Manual

1. Introducció

Thank you for choosing the TODIMART T3 Electric Scooter. This manual provides essential information for the safe operation, assembly, and maintenance of your scooter. Please read it thoroughly before your first ride to ensure optimal performance and safety.

2. Informació de seguretat

Your safety is paramount. Always wear a helmet and appropriate protective gear (knee pads, elbow pads) when riding. Adhere to local traffic laws and regulations. Do not ride in adverse weather conditions or on slippery surfaces. Avoid riding under the influence of alcohol or drugs. This scooter is designed for one rider only and has a maximum load capacity of 120 kg.

• Always check the scooter before each ride for any loose parts, tire pressure (if applicable), and brake functionality.
• Mantingueu una distància de seguretat amb altres vehicles i vianants.
• No feu acrobàcies ni maniobres brusques.
• Children aged 12-15 may use the scooter under strict adult supervision and with appropriate safety measures.

3. Contingut del paquet

Upon opening the box, please verify that all the following items are included:

• TODIMART T3 Electric Scooter
• Carregador
• Eines (per al muntatge)
• Manual d'usuari (aquest document)

4. Producte acabatview

Familiarize yourself with the main components of your TODIMART T3 Electric Scooter.

Figure 4.1: The TODIMART T3 Electric Scooter, showcasing its sleek design and the accompanying mobile application interface.

Figura 4.2: Una explosió view highlighting the 36V 7.8Ah battery pack and the 350W motor, indicating the scooter's power and range capabilities.

Figure 4.3: Detail of the handlebars, showing the integrated LCD display for speed and battery level, and the acceleration button for control.

Figure 4.4: Key safety and performance features: bright LED headlight, rear brake light, efficient rear disc brake, and durable 8.5-inch solid honeycomb tires.

5. Configuració

The TODIMART T3 Electric Scooter comes mostly pre-assembled. Follow these steps for final setup:

1. Desplegant el patinet: Carefully lift the handlebar stem until it clicks into place. Ensure the folding mechanism is securely locked.
2. Muntatge del manillar: Insert the handlebars into the stem and tighten any screws using the provided tools. Ensure they are firm and do not wobble.
3. Càrrec inicial: Before first use, fully charge the scooter's battery. Refer to the 'Charging' section for detailed instructions.

6. Instruccions de funcionament

6.1 Encès/Apagat

Premeu i manteniu premut el botó d'engegada a la pantalla per encendre o apagar el patinet.

6.2 Conduint el scooter

1. Place one foot on the deck and push off with the other foot to gain some initial speed.
2. Once moving, gently press the acceleration button (throttle) on the right handlebar.
3. To slow down or stop, release the throttle and apply the rear mechanical disc brake.

6.3 modes de velocitat

The T3 offers three speed modes. Cycle through them by short-pressing the power button while the scooter is on. The current mode will be indicated on the LCD display.

6.4 Control de creuer

To activate cruise control, maintain a consistent speed for a few seconds. The scooter will beep, and cruise control will engage. To disengage, press the brake lever or the throttle.

6.5 Mobile App Connectivity

Connect your TODIMART T3 to the dedicated mobile app via Bluetooth for enhanced features:

• Lock/Unlock the scooter
• Customize maximum speed settings
• Monitor battery capacity, speed, and mileage
• Activate/deactivate cruise control

7. Càrrega

To charge your TODIMART T3 Electric Scooter:

1. Assegureu-vos que el patinet estigui apagat.
2. Locate the charging port, usually covered by a rubber flap, on the scooter's frame.
3. Connecteu el carregador al port de càrrega i, a continuació, endolleu-lo a una presa de corrent estàndard.
4. El llum indicador del carregador normalment s'il·luminarà en vermell durant la càrrega i en verd quan estigui completament carregat.
5. Disconnect the charger once charging is complete and secure the charging port flap.

Nota:

• El temps de càrrega és d'aproximadament 4-5 hores per a una càrrega completa.
• No deixeu el patinet carregant-se sense supervisió durant períodes prolongats.
• Feu servir només el carregador original que s'inclou amb el vostre patinet.

8. Manteniment

Regular maintenance will prolong the life of your scooter and ensure safe operation.

8.1 Neteja

Netegeu el patinet amb anunciamp cloth. Do not use high-pressure water jets or corrosive cleaning agents. Ensure the charging port is dry before charging.

8.2 Cura dels pneumàtics

The TODIMART T3 uses 8.5-inch solid honeycomb tires, which are puncture-proof and require no inflation. Regularly inspect them for wear and tear.

8.3 Ajust del fre

Periodically check the effectiveness of the rear mechanical disc brake. If braking performance degrades, consult a qualified technician for adjustment or replacement of brake pads.

8.4 Emmagatzematge

Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every 30-60 days to prevent deep discharge.

Figure 8.1: The TODIMART T3 scooter in its folded state, demonstrating its portability and ease of storage.

9. Solució De Problemes

This section addresses common issues you might encounter with your TODIMART T3 Electric Scooter.

10. Especificacions

11. Garantia i Suport

TODIMART provides a strong after-sales service team to address any concerns you may have. Spare parts are available for 3 years from the date of purchase.

For technical support, warranty claims, or any other inquiries, please contact your retailer or the TODIMART customer service directly. Refer to your purchase documentation for specific contact details.