EMOS TSS910A Photoelectric Smoke Detector User Manual

1. Introducció

Thank you for choosing the EMOS TSS910A Photoelectric Smoke Detector. This manual provides essential information for the safe and effective installation, operation, and maintenance of your smoke detector. Please read these instructions carefully before use and retain them for future reference.

The EMOS TSS910A is designed to provide early warning of fire by detecting smoke particles. It features a photoelectric sensor, an 85 dB acoustic alarm, and an optical LED warning light, ensuring reliable detection and alerting. With its 10-year lifespan and included 9V battery, it offers long-term safety for your home or office.

2. Informació de seguretat

• This smoke detector is intended for indoor use only.
• Do not paint the smoke detector. Paint can clog the sensing chambers and prevent the alarm from functioning correctly.
• No instal·leu en zones amb molta humitat, temperatures extremes o excés de pols.
• Regularly test the smoke detector as described in the operating instructions.
• Never ignore a smoke alarm. Investigate the cause and take appropriate action immediately.
• Keep out of reach of children unless installed securely.
• Desfeu-vos de les piles i del dispositiu d'acord amb la normativa local.

3. Contingut del paquet

Assegureu-vos que tots els elements siguin presents al paquet:

• 1 x EMOS TSS910A Smoke Detector
• 1 x 9V Battery (Alkaline)
• Cargols de muntatge i tacs de paret
• Manual d'usuari (aquest document)

4. Producte acabatview

Familiarize yourself with the components of your EMOS TSS910A smoke detector:

This image displays the EMOS TSS910A smoke detector from the front and side, highlighting key features. The front view shows the acoustic alarm vents, the optical alarm LED, and the central test button. An inset image shows the battery compartment. Dimensions are also provided: 101 mm diameter and 36 mm height.

• Botó de prova: Press to test the alarm function.
• Optical LED: Flashes periodically during normal operation and rapidly during an alarm.
• Alarma acústica: Emits an 85 dB sound during an alarm.
• Compartiment de la bateria: Located on the rear for the 9V battery.
• Placa de muntatge: Detachable plate for ceiling or wall installation.

5. Configuració i instal·lació

5.1 Selecció d'una ubicació

For optimal protection, install smoke detectors in every sleeping area and on every level of your home, including the basement. Consider these guidelines:

• Install on the ceiling in the center of a room or hallway.
• If wall-mounted, the top of the alarm should be 10-30 cm (4-12 inches) below the ceiling.
• Keep away from corners (at least 50 cm / 20 inches from walls).
• Avoid installing near windows, doors, or air vents where drafts could interfere with smoke detection.
• Do not install in kitchens, bathrooms, or garages where cooking fumes, steam, or exhaust fumes could cause false alarms.

This image shows the EMOS TSS910A smoke detector mounted on a ceiling, demonstrating a typical installation scenario in a residential setting. The detector is centrally placed on the ceiling, blending with the room's decor.

5.2 Instal·lació de la bateria

1. Twist the smoke detector counter-clockwise to detach it from the mounting plate.
2. Localitzeu el compartiment de la bateria a la part posterior del detector.
3. Connect the included 9V alkaline battery to the battery clip, ensuring correct polarity (+ to + and - to -).
4. Col·loqueu la bateria al compartiment.
5. Reattach the smoke detector to the mounting plate by aligning the marks and twisting clockwise until it clicks into place.

This image illustrates the open battery compartment of the EMOS TSS910A smoke detector, clearly showing the terminals for the 9V battery. This visual aid helps users correctly install the battery.

5.3 Muntatge del detector

1. Once the battery is installed, hold the mounting plate against the chosen ceiling or wall location.
2. Mark the positions for the two screw holes.
3. Drill two holes at the marked positions. Insert the wall plugs if necessary.
4. Secure the mounting plate with the provided screws.
5. Attach the smoke detector to the secured mounting plate by aligning the marks and twisting clockwise until it locks firmly.
6. After mounting, press the test button to ensure the alarm functions correctly.

6. Instruccions de funcionament

6.1 Funcionament normal

Once installed with a fresh battery, the smoke detector is active. The optical LED will flash approximately once every 40-60 seconds to indicate normal operation.

6.2 Prova de l'alarma

It is crucial to test your smoke detector weekly to ensure it is functioning correctly. To test:

• Press and hold the large central Botó de prova on the front of the detector for a few seconds.
• The alarm will sound loudly (85 dB), and the LED will flash rapidly.
• Deixa anar el botó. L'alarma hauria de parar.
• Si l'alarma no sona, consulteu la secció Resolució de problemes.

6.3 Indicació d'alarma

• Alarma de fum: When smoke is detected, the alarm will sound continuously (85 dB), and the red LED will flash rapidly.
• Avís de bateria baixa: The detector will chirp approximately once every 30-40 seconds, and the LED will flash simultaneously, indicating that the battery needs to be replaced. This warning will continue for about 30 days.

7. Manteniment

7.1 Substitució de la bateria

When the low battery warning sounds (a chirp every 30-40 seconds), replace the 9V battery immediately. Use only alkaline 9V batteries. To replace:

1. Twist the smoke detector counter-clockwise to remove it from the mounting plate.
2. Disconnect the old 9V battery from the clip and remove it.
3. Connect a new 9V alkaline battery, ensuring correct polarity.
4. Place the new battery into the compartment.
5. Reattach the smoke detector to the mounting plate by aligning the marks and twisting clockwise until it clicks into place.
6. Test the alarm using the test button after battery replacement.

7.2 Neteja del detector de fum

La pols i les restes es poden acumular al detector de fum i afectar-ne el rendiment. Netegeu el detector almenys un cop al mes:

• Gently vacuum the exterior of the smoke detector using a soft brush attachment.
• Netegeu la coberta amb un drap lleuger.amp tela. No utilitzeu productes de neteja ni dissolvents.
• Never paint the smoke detector.

7.3 Vida útil

The EMOS TSS910A smoke detector has a 10-year operational lifespan. After 10 years from the manufacturing date (usually printed on the device), the entire unit should be replaced, even if it appears to be working correctly.

This image emphasizes the 10-year safety feature of the EMOS TSS910A smoke detector, shown installed on a ceiling. The long lifespan of the sensor and the low battery warning ensure continuous operation and safety.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

EMOS products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official EMOS weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.