1. Introducció
The SILCA Synergetic Bike Chain Lube is a high-performance wet lubricant designed to optimize the efficiency and longevity of your bicycle chain. Formulated with a unique blend of premium synthetic oil, ZDDP, and WS2, this low-viscosity lube significantly reduces friction and wear, prevents rust, and ensures ultra-quiet, long-lasting performance. This product is proudly made in the USA.
Figure 1: SILCA Synergetic Bike Chain Lube 2oz bottle. This image shows the product packaging.
2. Informació important de seguretat
- DO NOT INGEST: This product is intended for bicycle chains only. Keep out of reach of children and pets.
- Evita el contacte: Prevent contact with eyes and skin. In case of contact, rinse thoroughly with water.
- Ventilació: Utilitzeu-ho en una zona ben ventilada.
3. Setup: Preparing Your Chain
3.1 Initial Chain Cleaning
For optimal performance and longevity, it is crucial to thoroughly clean and degrease your bicycle chain before the first application of SILCA Synergetic Lube. Remove all old lubricant, dirt, and grime. A clean chain allows the new lubricant to penetrate effectively and form its protective tribofilm layer.
3.2 Bottle Preparation
The SILCA Synergetic Lube contains solid lubricants that may settle at the bottom of the bottle over time. Before each use, shake the bottle vigorously for at least 30 seconds to ensure all active ingredients are evenly mixed. This ensures consistent performance and maximum protection.
Figure 2: The SILCA Synergetic Lube bottle, showing settled lubricant components at the bottom. Shake well before use.
4. Funcionament: Instruccions d'aplicació
4.1 Step-by-Step Application
- Ensure your bicycle chain is clean and dry.
- Hold the bottle with the nozzle over the chain.
- Apply one drop of SILCA Synergetic Lube to the middle of each chain roller while slowly rotating the cranks backward.
- After applying to all rollers, rotate the cranks backward 10-12 revolutions to help distribute the lubricant evenly throughout the chain links.
- Allow the lube to penetrate for at least 30 minutes. For best results and maximum durability, allow it to sit overnight.
- Before your next ride, use a clean, dry cloth to wipe off any excess lubricant from the exterior surfaces of the chain. This prevents dirt attraction and ensures a clean drivetrain.
Figure 3: A hand applying SILCA Synergetic Lube to a bicycle chain as it passes over the cassette.
4.2 Producte acabatview Vídeo
Vídeo 1: Un producte oficial acabatview video demonstrating the features and application of SILCA Synergetic Bike Chain Lube.
5. Manteniment
5.1 Regular Cleaning and Reapplication
- Post-Ride Wipe Down: After each ride, use a clean, dry cloth to wipe down the exterior of your chain. This removes surface contaminants and helps maintain the cleanliness of your drivetrain.
- Reapplication Interval: Reapply SILCA Synergetic Lube approximately every 500 miles (800 km), or sooner if you notice increased chain noise or if riding in wet or dusty conditions. Always ensure the chain is clean before reapplication.
- Emmagatzematge: Store the bottle in a cool, dry place, away from direct sunlight.
6. Solució De Problemes
6.1 Problemes comuns i solucions
- Soroll de cadena: If your chain becomes noisy after lubrication, it may indicate that the lubricant has not fully penetrated the chain rollers, or that the chain was not sufficiently clean before application. Thoroughly clean the chain and reapply the lube, ensuring adequate penetration time.
- Lube Separation: The solid lubricants in Synergetic Lube can settle. If you observe separation, shake the bottle vigorously before use until the contents are uniformly mixed.
- Dirt Attraction: As a wet lubricant, Synergetic Lube may attract some dirt and grime, especially in adverse conditions. This is normal for wet lubes. Regular post-ride wiping of the chain will minimize accumulation.
7. Especificacions
7.1 Detalls del producte
| Propietat | Valor |
|---|---|
| Material | Oil, Lube |
| Volum líquid | 59 mil·lilitres (2.0 unces líquides) |
| Pes de l'article | 2 unces |
| Formulari d'article | Oli |
| Usos específics per al producte | Bicycle chain lubricant |
| Components inclosos | Punta de l'aplicador |
| Viscositat | Baixa |
| GTIN / UPC | 810093160945 |
Figure 4: An image displaying the results of an ASTM G77 Pin on Ring Test, comparing wear reduction for different lubricants.
8. Informació de la garantia
No specific warranty information is provided within the product details. For any warranty-related inquiries or claims, please contact SILCA customer support directly.
9. Atenció al client
For further assistance, technical support, or questions regarding your SILCA Synergetic Bike Chain Lube, please visit the official SILCA weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
You can also visit the official SILCA Store on Amazon for more information and products:
