Bear Bottle Washer Pro: User Manual

1. Introducció

The Bear Bottle Washer Pro is an advanced 4-in-1 appliance designed to simplify the cleaning and sterilization of baby bottles, pump parts, and other baby essentials. This unit integrates washing, sterilizing, drying, and hygienic storage functions into a single, compact device, providing a comprehensive solution for busy parents.

With its powerful spray jets, high-temperature steam sterilization, and efficient hot air drying, the Bear Bottle Washer Pro ensures that your baby's items are thoroughly cleaned, sanitized, and ready for use. This manual provides detailed instructions for safe and effective operation, maintenance, and troubleshooting.

2. Salvaguardes importants

• Llegiu totes les instruccions abans d'utilitzar l'aparell.
• No submergiu la unitat principal en aigua o altres líquids.
• Assegureu-vos que l'aparell estigui col·locat sobre una superfície estable, plana i resistent a la calor.
• Mantenir fora de l'abast dels nens.
• Use only distilled or filtered water to prevent mineral buildup and prolong appliance life.
• Only use official Bear detergent tablets or recommended alternatives.
• Desconnecteu-lo de la presa de corrent quan no utilitzeu i abans de netejar-lo.
• No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi fet malbé de cap manera.
• This appliance is compatible with 120V 60Hz voltage.

3. Components del producte

• Unitat principal amb tauler de control
• Tapa transparent
• Upper Rack (for smaller items like nipples, pacifiers, pump parts)
• Lower Rack (for bottles)
• Dipòsit d'aigua (capacitat de 2.6L)
• Drain Pipe with Suction Cups
• 90 Bear Detergent Tablets

Figure 1: Bear Bottle Washer Pro with its internal racks and components.

4. Configuració

1. Desempaquetar la unitat: Traieu amb cura tots els components de l'embalatge.
2. Col·locació de l'aparell: Place the Bear Bottle Washer Pro on a stable, flat surface near a sink or a bucket for drainage.
3. Connect the Drain Pipe: Attach the drain pipe to the designated outlet on the side of the main unit. Secure the other end of the drain pipe into a sink or a bucket using the suction cups to prevent spills.
4. Ompliu el dipòsit d’aigua: Remove the water tank from the side of the unit. Fill it with pure or filtered water up to the indicated MAX line (2.5L). Reattach the water tank securely to the main unit.
5. Connectar: Connect the power cord to a 120V 60Hz electrical outlet.

Figure 2: Illustration of filling the water tank and connecting the drain pipe.

5. Instruccions de funcionament

5.1 Càrrega d'elements

• Place bottles upside down on the lower rack, ensuring they fit over the spray nozzles for thorough internal cleaning. The dual-tier rack can hold up to 4 standard bottles.
• Arrange smaller items like nipples, pacifiers, and breast pump parts on the upper rack.
• Add one Bear detergent tablet directly into the main washing cavity.
• Tanqueu la tapa transparent amb seguretat.

Figure 3: Properly loading bottles and accessories into the washer.

5.2 Selecció d'un mode

The control panel features a clear LED display and touch buttons for various functions:

Figure 4: Bear Bottle Washer Pro control panel with mode selections.

Press the Power button to turn on the unit. Select your desired function by pressing the corresponding button. The cycle will begin automatically.

5.3 Adding Items Mid-Cycle

If you forget to add an item, you can pause the cycle by lifting the lid slightly. Wait for the water flow to stop, then open the lid fully to add items. Close the lid to resume the cycle.

Figure 5: The ability to pause and add items during a cycle.

6. Manteniment

6.1 Neteja regular

• After each use, ensure the water tank is emptied and cleaned.
• Wipe down the interior and exterior of the unit with a damp tela.
• The racks are removable and can be hand-washed or placed in a dishwasher.

6.2 Descalcificació

Depending on water hardness, mineral deposits may accumulate. Descale the unit regularly (e.g., monthly) using a descaling solution or a mixture of white vinegar and water. Follow the descaling product's instructions or run a 'Steam' cycle with the vinegar solution, then rinse thoroughly.

6.3 Manteniment del filtre HEPA

The HEPA filter helps maintain a sterile, odor-free environment during storage. Check the filter periodically and replace it as needed to ensure optimal performance. Refer to the product packaging for replacement filter information.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

The Bear Bottle Washer Pro comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, alteration, or unauthorized repair.

For warranty claims, technical support, or any questions regarding your product, please contact Bear customer service through the official website or the contact information provided in your purchase documentation. Please have your model number (QXJ-C05F3) and proof of purchase ready.

10. Vídeos de productes