1. Informació important de seguretat
WARNING: To prevent serious injury or death, always read and understand all instructions and precautions provided in this manual before assembling, starting, or servicing the heater. Improper use of this heater can cause serious injury.
- Ventilation is Critical: This heater consumes oxygen and produces carbon monoxide. Always operate in a well-ventilated area. Ensure adequate fresh air supply to prevent oxygen depletion and carbon monoxide buildup.
- Autorització de combustibles: Maintain a minimum distance of 6 feet (US) or 10 feet (CA) from the front of the heater to any combustible materials. Keep the heater and propane tank away from flammable objects.
- Detector de monòxid de carboni: Always use a working carbon monoxide detector when operating this heater.
- Comprovació de fuites: Before each use, check all gas connections for leaks using a soap and water solution. Bubbles indicate a leak. Do not use the heater until all leaks have been stopped.
- Connexió elèctrica: Connect the power cord to a well-grounded 115V / 60Hz outlet.
- Ús interior: Designed for well-ventilated indoor spaces like garages, workshops, and job sites. Not for home or recreational vehicle use.
- Protecció contra el sobreescalfament: The heater features an automatic overheat shut-off.
- Protecció en cas de volcar: The heater is equipped with a tip-over safety switch that will shut off the unit if it is accidentally knocked over.
2. Producte acabatview
The InoKraft Maxheat MH85 is an 85,000 BTU forced air propane heater designed for rapid and efficient heating of large spaces up to 3,200 sq. ft. It features an intelligent thermostat for automatic temperature control and multiple safety features.

Figure 2.1: InoKraft Maxheat MH85 85,000 BTU Forced Air Propane Heater providing warmth in a garage.
Característiques principals:
- Smart 25-95°F Auto On/OFF Control: Automatically maintains desired temperature, optimizing comfort and fuel efficiency.
- Fast & Powerful Heating: Delivers rapid warmth across wide areas with a heavy-duty forced air fan.
- CSA Certified Safety: Includes overheat auto-shutoff and tip-over protection.
- Funcionament sense olors: Provides clean, quiet heat suitable for well-ventilated indoor and job site use.
- Easy Operation & Portable: Simple setup with a 10 ft hose included, and a convenient handle for transport.
3. Instruccions de configuració
Follow these steps to safely set up your InoKraft Maxheat MH85 heater.
3.1 Desembalatge i muntatge
- Carefully remove all packing materials from the heater and its components.
- Attach the handle to the top of the heater using a Phillips screwdriver and the provided screws.

Figure 3.1: Heater components including handle, hose, and control panel.
3.2 Connexió del dipòsit de propà
- Connect the hose/regulator assembly to a 20lb. propane tank or larger. Securely tighten using a wrench.
- Connect the other end of the hose to the inlet connector on the heater. Securely tighten.
- Apply a soap and water solution to all connections to check for gas leaks. Bubbles indicate a leak. Do not use the heater until all leaks have been stopped.
3.3 Connexió elèctrica
- Connect the power cord to a well-grounded 115V / 60Hz outlet.
3.4 Col·locació i ventilació
- Position the heater on a stable, level surface.
- Ensure the heater is placed in a well-ventilated area with at least 2 ft x 2 ft (US) or 0.19 m² (CA) of opening for fresh air.
- Maintain a minimum clearance of 6 feet (US) or 10 feet (CA) from the front of the heater to any combustible materials.
Video 3.1: Official InoKraft video demonstrating preparations before using the MH85 Forced Air Propane Heater, including unpacking and connections.
4. Instruccions de funcionament
Follow these steps to safely operate your InoKraft Maxheat MH85 heater.
4.1 Engegar l'escalfador
- Slowly open the gas valve on the propane tank.
- Position yourself behind the heater.
- Turn the Temperature Control Knob clockwise to the maximum temperature setting (95°F).
- Turn the ON/OFF Control Switch to the 'ON' position. The heater should ignite within 30 seconds.
- If the indicator light flashes 5 times in 3 seconds, turn off the heater and repeat the process.

Figure 4.1: Steps for setting the temperature and automatic operation.
4.2 Ajust de la temperatura
- Once ignited, turn the Temperature Control Knob counter-clockwise to your desired temperature level (between 25°F and 95°F).
- The heater will automatically shut off once the target temperature is reached. The fan will continue to operate for an additional 30 seconds to prevent possible gas leakage and overheating.
- The heater will reignite automatically when the temperature drops below your set temperature by around 5°F.

Figure 4.2: The smart thermostat control knob allows for precise temperature setting.
4.3 Aturar l'escalfador
- Close the gas valve on the propane tank.
- Let the fan run for 30 seconds to cool down the unit.
- Turn the Power Switch to 'OFF' and unplug the heater.
- Disconnect the hose from the heater and propane tank.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre escalfador.
- Neteja: Keep the heater clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Emmagatzematge: When not in use, store the heater in a cool, dry place, away from direct sunlight and moisture. Ensure the propane tank is disconnected and stored separately according to local regulations.
- Inspecció: Periodically inspect the hose and connections for any signs of wear, damage, or leaks. Replace any damaged parts immediately.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Gas valve closed, power not connected, low propane, ignition failure. | Open gas valve, connect power, check propane level, ensure proper ignition sequence (refer to Operating Instructions). If indicator flashes 5 times, restart. |
| La calefacció s'apaga inesperadament. | Overheat protection activated, tip-over switch activated, low oxygen/poor ventilation, gas leak. | Ensure proper ventilation, check for obstructions, verify heater is upright, check for gas leaks. Allow to cool before restarting. |
| Flama feble o inconsistent. | Low propane level, clogged burner, faulty regulator. | Check propane tank, clean burner, inspect regulator. |
7. Especificacions
- Marca: InoKraft
- Model: MH85
- Potència de calor: 85,000 BTU
- Zona de calefacció: Fins a 3,200 peus quadrats
- Tipus de combustible: Propà
- Font d'alimentació: 115V / 60Hz (for fan and ignition)
- Control de temperatura: Automatic On/Off, 25-95°F range
- Característiques de seguretat: Overheat Auto-Shutoff, Tip-Over Protection, CSA Certified
- Dimensions del producte: 20.67 "P x 10.83" W x 16.53" H
- Pes de l'article: 17.2 lliures
8. Garantia i Suport
The InoKraft Maxheat MH85 is backed by a 1 anys de garantia del fabricant. For any issues or support needs, please contact InoKraft customer service. Qualified customers may be eligible for a free exchange if issues occur within the warranty period.
For further assistance, refer to the official InoKraft weblloc web o contacteu directament amb el seu servei d'atenció al client.





