AQQA AQ143 Intelligent Aquarium Heater User Manual

1. Introducció i finalview

The AQQA AQ143 Intelligent Aquarium Heater is designed to maintain a stable and precise water temperature for your aquatic pets. Featuring advanced safety mechanisms and an external controller, this heater ensures optimal conditions for fish, reptiles, and aquatic plants in tanks ranging from 3 to 220 gallons, depending on the wattage model.

Característiques principals:

• Construcció duradora: Protective case made of corrosion-resistant, high-temperature materials with an explosion-proof quartz glass tube.
• Escalfament ràpid: High purity nickel wire ensures quick and efficient heating.
• External Dual Display Controller: High-definition display for accurate real-time and set temperatures.
• Control precís de la temperatura: Set temperature range from 59℉-93℉ (15℃-34℃) with 1-degree increment adjustments.
• Automatic Power Off (Out of Water): Heater automatically powers off and displays error code E1 if it leaves the water surface by 2.4 inches. Resumes normal operation when fully re-immersed.
• Ultra-high Temperature Automatic Power-off: Automatically cuts off power and displays error code HH if water temperature exceeds 95℉ (35℃). Alarm releases when temperature drops below 95℉ (35℃).
• Funció de memòria: Conserva la configuració després d'una fallada de corrent.
• Ús versàtil: Suitable for both fresh and saltwater aquariums.

2. Instruccions de seguretat

Please read all safety instructions carefully before operating the AQQA AQ143 Intelligent Aquarium Heater to prevent injury or damage to the product and your aquarium inhabitants.

• Full Immersion: The heater must be completely immersed in water for use. Never operate the heater out of water.
• Període de refredament: If you need to remove the heater from the water, disconnect the power and allow it to cool down for at least 15 minutes before handling.
• Pre-use Inspection: Before first use, carefully check the glass tube for any cracks or damage. Do not use if damaged.
• Seguretat del cable d'alimentació: Ensure the power cord is not damaged or frayed. Do not use if the cord is damaged. Avoid creating a “drip loop” to prevent water from traveling along the cord to the outlet.
• Col·locació: For optimal performance and safety, it is recommended to place the heater at a vertical inclination of 30-45 degrees within the aquarium.
• Només per a ús domèstic: Aquest escalfador està dissenyat només per a ús domèstic.

3. Contingut del paquet

En obrir el paquet, assegureu-vos que hi hagi tots els elements i que estiguin en bon estat:

• 1 x AQQA Intelligent Aquarium Heater Unit
• 1 x External Temperature Controller with Power Cord
• 2-3 x Suction Cups (quantity may vary by model)
• 1 x Manual d'usuari

4. Configuració

1. Col·loqueu ventoses: Securely attach the provided suction cups to the heater unit. These will hold the heater in place against the aquarium glass.
2. Posició de l'escalfador: Place the heater inside your aquarium, ensuring it is fully submerged in water. For best results, position it at a vertical inclination of 30-45 degrees. Ensure the heater is not obstructed by decorations or substrate to allow for proper water circulation.
3. Connecteu-vos a l'alimentació: Plug the external temperature controller's power cord into a suitable electrical outlet. Ensure a drip loop is formed to prevent water from reaching the outlet.

Image: AQQA Aquarium Heater installed in a fish tank, showing proper placement and the external controller.

Image: Diagram illustrating correct vertical and angled placement of the heater, and incorrect horizontal placement or partial immersion.

5. Instruccions de funcionament

The AQQA AQ143 heater features an external controller for easy temperature adjustment and monitoring.

1. Encès: Once plugged in, the external controller will display the real-time water temperature (labeled 'Real' or 'Water Temp') and the set temperature (labeled 'Set Temp').
2. Temperatura establerta: Press the 'Set' button on the controller to enter setting mode. The set temperature display will flash. Use the 'Up' and 'Down' buttons (or single button press, depending on model) to adjust the desired temperature between 59℉ and 93℉ (15℃-34℃). Each press increases/decreases by 1 degree. The setting will automatically save after a few seconds of inactivity.
3. Conversió Fahrenheit/Celsius: Press and hold the 'Set' button for 8 seconds to switch between Fahrenheit (℉) and Celsius (℃) display modes.
4. Indicador de calefacció: A red light on the controller indicates that the heater is actively heating the water. A blue light (or no light) indicates that the heater has reached the set temperature and is in standby mode.
5. Funcionament automàtic: The heater will automatically turn on when the water temperature falls below the set temperature and turn off once the set temperature is reached.

Image: External controller displaying real-time water temperature and user-set temperature, with heating indicator lights.

6. Manteniment

Regular cleaning and inspection are essential for the longevity and efficient operation of your AQQA Aquarium Heater.

• Freqüència de neteja: Disassemble and clean the heater once every 1-2 weeks of continuous use.
• Desmuntatge: The heater is designed for easy disassembly. Gently pull the casing apart section by section to access the internal components for cleaning.
• Procediment de neteja: Use a soft brush or cloth to remove any algae or mineral buildup from the heater unit. Rinse thoroughly with aquarium water. Do not use harsh chemicals or detergents.
• Remuntatge: Ensure all parts are dry and correctly reassembled before placing the heater back into the aquarium.

Image: Step-by-step guide on how to disassemble and clean the heater, along with illustrations of correct and incorrect heater placement.

7. Solució De Problemes

The AQQA AQ143 Intelligent Aquarium Heater is equipped with safety features that display error codes in certain situations.

• Error Code E1 (Out of Water): If the heater leaves the water surface by 2.4 inches, it will automatically power off and display 'E1'. To resolve, ensure the heater is fully re-immersed in the water. It will automatically return to normal operation.
• Error Code HH (Ultra-high Temperature): If the real-time water temperature is detected to be above 95℉ (35℃), the heater will automatically cut off power and display 'HH'. The alarm will be released once the water temperature drops to 95℉ (35℃) or below.
• Heater Not Heating: Check if the power cord is securely plugged in. Verify that the set temperature is higher than the real-time water temperature. Ensure the heater is fully submerged.
• Lectura de temperatura inexacta: Compare the controller's reading with a separate, reliable aquarium thermometer. If there's a significant discrepancy, ensure the controller's sensor is clean and properly positioned.

Image: Visual explanation of the 'Out of Water Power Off' (E1) and 'Ultra-high Temperature Automatic Power-off' (HH) safety features.

8. Especificacions

Image: Detailed product specifications table and visual representation of different wattage heaters with their dimensions.

9. Garantia i Suport

The AQQA AQ143 Intelligent Aquarium Heater comes with a Garantia del fabricant de 2 anys. For any warranty claims, technical support, or product inquiries, please contact AQQA customer service through the retailer where the product was purchased.