LOFREE Flow2 Low-Profile Manual d'usuari del teclat mecànic

1. Introducció

The LOFREE Flow2 is a low-profile mechanical keyboard designed for versatility and durability. It features an aluminum alloy body, Void Linear Switches, and offers three connection modes: wired (USB-C), 2.4GHz wireless, and Bluetooth. This manual provides detailed instructions for setting up, operating, and maintaining your Flow2 keyboard.

2. Configuració

2.1 Què hi ha a la caixa

Upon unboxing your LOFREE Flow2 keyboard, you will find the following items:

• LOFREE Flow2 Mechanical Keyboard
• Cable USB-C d'1.5 m
• Receptor de 2.4 GHz
• 4 Replacement Keycaps (for Windows/macOS compatibility)
• Manual d'usuari

Descripció de la imatge: A flat lay image displaying all items included in the LOFREE Flow2 keyboard package: the keyboard, a braided USB-C cable, a small 2.4GHz USB receiver, four additional keycaps, and the user guide.

2.2 Connectivitat

The Flow2 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth. A dedicated switch on the back of the keyboard allows you to select your preferred mode.

Power Switch and Mode Selection

The power switch is located on the back of the keyboard, concealed behind one of the flip-out feet. Toggle this switch to select between Wired, Bluetooth (BT), or 2.4GHz wireless modes.

Descripció de la imatge: A close-up of the back of the LOFREE Flow2 keyboard, illustrating the three-way toggle switch for wired, Bluetooth, and 2.4GHz wireless connections, located near the USB-C port and a foldable kickstand.

Mode per cable

1. Ensure the power switch on the back of the keyboard is set to the Amb cable posició.
2. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to your computer.
3. El sistema reconeixerà automàticament el teclat.

Mode sense fil de 2.4 GHz

1. Ensure the power switch on the back of the keyboard is set to the 2.4G posició.
2. Insert the 2.4GHz USB receiver into an available USB port on your computer.
3. Al teclat, premeu Fn + 4 to activate 2.4GHz mode. The keyboard should connect automatically.

Mode Bluetooth

1. Ensure the power switch on the back of the keyboard is set to the BT posició.
2. Al teclat, premeu Fn + 1, Fn + 2, o Fn + 3 per seleccionar un canal Bluetooth. L'indicador lluminós parpellejarà, indicant el mode d'emparellament.
3. On your device (computer, tablet, phone), navigate to Bluetooth settings and select "LOFREE Flow2" from the list of available devices to pair.

2.3 System Switch (Windows/macOS)

The Flow2 keyboard is compatible with both Windows/Android and macOS/iOS operating systems. You can switch between system layouts using the following key combinations:

• Per Windows / Android: Mantingueu premut Fn + N.
• Per macOS / iOS: Mantingueu premut Fn+M.

3. Instruccions de funcionament

3.1 Side Touch Bar Functions

The LOFREE Flow2 features a side touch bar for quick adjustments to volume and screen brightness, as well as a lock function.

Descripció de la imatge: Un detallat view of the keyboard's right side, showcasing the touch-sensitive bar with visual indicators for volume, screen brightness, and a lock feature.

• Control de volum: Swipe your finger up on the touch bar to increase volume, and swipe down to decrease it.
• Brillantor de la pantalla: Manteniu premuda la Fn key and swipe your finger up on the touch bar to increase screen brightness, or swipe down to decrease it.
• Funció de bloqueig: To prevent accidental touches, press and hold Fn + barra espaiadora for approximately 3 seconds to toggle the touch bar lock.

3.2 Configuració de la llum de fons

Adjust the keyboard's backlight to suit your preference.

• Canvia el mode d'il·luminació: Premeu Fn + Fletxa esquerra or Fn + Fletxa dreta to cycle through different backlight modes (e.g., Steady On, Breathing, Off).
• Ajusta la brillantor: Premeu Fn + Fletxa amunt to increase backlight brightness, and Fn + Fletxa avall per disminuir-lo.

4. Keycap and Switch Management

The LOFREE Flow2 keyboard comes with pre-installed Mac keycaps and includes additional Windows keycaps for customization. The switches are hot-swappable, allowing for easy replacement.

Descripció de la imatge: The LOFREE Flow2 keyboard with several keycaps removed and placed beside it, illustrating the included Windows and macOS keycap options for system compatibility.

4.1 Swapping Keycaps

To change keycaps, use the included keycap puller:

1. Insert both ends of the keycap puller into the gaps on either side of the keycap you wish to remove.
2. Gently pull straight up until the keycap detaches.
3. For larger keycaps (e.g., Spacebar, Enter, Shift), pull from both sides separately to prevent damage to the stabilizers.
4. Alineeu la nova tapa de tecla amb la tija de l'interruptor i premeu fermament fins que encaixi al seu lloc.

4.2 Removing Switches

The Flow2 features hot-swappable switches. To remove a switch, use a switch puller (not included, but typically comes with switch sets):

1. First, remove the keycap as described above.
2. Align the switch puller with the clips on the top and bottom of the switch.
3. Gently squeeze the clips and pull the switch straight upward. Avoid twisting to prevent bending the pins.
4. To install a new switch, align its pins with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are straight before inserting.

Descripció de la imatge: A diagram illustrating the internal components of a Void Linear Switch, including the stem, spring, and housing, alongside a force curve graph detailing its operating and return points.

5. Especificacions del producte

6. Solució De Problemes

If you encounter issues with your LOFREE Flow2 keyboard, please refer to the following common solutions:

• El teclat no respon:
  • Ensure the power switch on the back is in the correct position for your chosen connection mode (Wired, BT, or 2.4G).
  • Check battery level. Connect the keyboard via USB-C to charge.
  • For 2.4GHz, ensure the USB receiver is securely plugged in and you've pressed Fn + 4.
  • For Bluetooth, ensure your device's Bluetooth is on, the keyboard is in pairing mode (Fn + 1/2/3), and it's paired correctly in your device's settings.
  • Try restarting your computer and the keyboard.
• Backlight Not Working/Dim:
  • Ajusta la brillantor amb Fn + Fletxa amunt/avall.
  • Change lighting mode using Fn + Fletxa esquerra/dreta.
  • Assegureu-vos que el teclat tingui prou bateria carregada.
• Keys Not Registering Correctly (Windows/macOS):
  • Verify the correct system layout is selected (Fn + N for Windows/Android, Fn+M for macOS/iOS).
  • If using QMK/VIA, ensure your custom layout is correctly loaded and active.
• Touch Bar Issues:
  • Ensure the touch bar is not locked. Press and hold Fn + barra espaiadora for 3 seconds to toggle the lock.

If these steps do not resolve your issue, please contact LOFREE customer support for further assistance.

7. Garantia i Suport

The LOFREE Flow2 keyboard is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For product support, technical assistance, or warranty claims, please visit the official LOFREE store or contact their customer service directly.

Official LOFREE Store: LOFREE Store on Amazon