WilTec 7010044

WilTec Catfree Ultrasonic Cat Repellent 88 m²

Model: 7010044

Introducció

Thank you for choosing the WilTec Catfree Ultrasonic Cat Repellent. This device is designed to humanely deter cats from specific areas using ultrasonic sound waves, providing an effective and harmless solution for your garden, pond, sandbox, or flower beds. Please read this manual carefully before installation and use to ensure optimal performance and safety.

Informació de seguretat

Producte acabatview

The WilTec Catfree is an ultrasonic cat repellent featuring a motion sensor and weatherproof design for year-round outdoor use. It operates on a 9V battery or an optional power adapter.

Davant view of the WilTec Catfree Ultrasonic Cat Repellent

Imatge 1: Davant view of the WilTec Catfree Ultrasonic Cat Repellent, showing the motion sensor and speaker grille.

Enrere view of the WilTec Catfree Ultrasonic Cat Repellent with battery compartment

Imatge 2: Enrere view of the WilTec Catfree Ultrasonic Cat Repellent, illustrating the wall-mounting slot and battery compartment cover.

Característiques principals:

Configuració i instal·lació

1. Alimentació del dispositiu:

The Catfree can be powered by a 9V battery or an optional AC power adapter.

  1. Instal·lació de la bateria:
    1. Locate the battery compartment on the back of the device (refer to Image 2).
    2. Obriu la coberta del compartiment.
    3. Introduïu una pila nova de 9 V, assegurant-vos de la polaritat correcta.
    4. Securely close the battery compartment cover to maintain weather resistance.
  2. AC Power Adapter (Optional):

    For continuous operation and increased signal intensity (up to 20% stronger), an optional AC power adapter can be used. Connect the adapter to the designated port on the device. The adapter is not included and must be purchased separately.

2. Recomanacions de col·locació:

Optimal detection and effectiveness are achieved with correct placement.

WilTec Catfree installed in a garden with a stake

Imatge 3: The Catfree device installed in a garden using the provided stake, positioned at an optimal height for cat detection.

Instruccions de funcionament

  1. Activació: Once the battery is installed or the power adapter is connected, the device is active. There is no separate ON/OFF switch.
  2. Detecció de moviment: The integrated motion sensor continuously monitors the designated area.
  3. Ultrasonic Emission: When a cat enters the detection zone, the motion sensor triggers the device to emit a burst of ultrasonic sound (20-24 kHz). This sound is designed to be unpleasant for cats, encouraging them to leave the area.
  4. Inaudible to Humans: The ultrasonic frequency is typically beyond the range of human hearing, making the device discreet in operation.
  5. Indicador LED: A small LED light on the device will illuminate when the 9V battery charge is low, indicating it's time for a replacement.

The Catfree operates automatically, providing continuous protection against feline intruders.

Manteniment

Resolució de problemes

ProblemaCausa possibleSolució
Device does not seem to be working.
  • La bateria està morta o mal instal·lada.
  • No power from AC adapter.
  • El sensor de moviment està obstruït.
  • Check and replace the 9V battery, ensuring correct polarity.
  • Verify AC adapter connection and power source.
  • Clear any obstructions from the motion sensor's view.
Cats are not deterred.
  • Incorrect placement (too low, too high, or obstructed).
  • Device is too far from the target area.
  • Some cats may be less sensitive to ultrasonic frequencies.
  • Battery is low (reduced signal strength).
  • Adjust placement to cat height and ensure a clear detection path.
  • Consider adding another unit for larger areas or using an AC adapter for increased signal strength.
  • Ensure the battery is fresh or use an AC adapter.
Low battery LED is on.9V battery is low or depleted.Substitueix la pila de 9 V immediatament.

Especificacions

Model:7010044
Dimensions (L x A x A):9.5 x 15.5 x 5 cm
Pes:130 grams
Material:Plàstic
Font d'alimentació:1 x 9V Battery (not included) or Optional AC/DC Adapter (not included)
Freqüència d'ultrasons:20 - 24 kHz
Motion Sensor Detection Angle:100°
Motion Sensor Detection Distance:Fins a 10 metres
Àrea de cobertura:Aproximadament 88 m²
Resistència a la intempèrie:Sí, apte per a ús a l'aire lliure