1. Introducció
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop. This advanced cleaning device combines powerful vacuuming with professional mopping, intelligent navigation, and a convenient self-emptying and mop-cleaning station.
Si us plau, llegiu aquest manual detingudament abans d'utilitzar el producte i conserveu-lo per a futures consultes.
2. Components del producte
The Cecotec Conga Z100 X-Treme package includes the following items:
- Robot Vacuum and Mop Unit
- Self-Emptying and Mop Cleaning Station
- Adaptador d'alimentació
- Raspalls laterals (2 unitats)
- Main Brush (silicone)
- Bimaterial Mop Pad
- Disposable Dust Bag (pre-installed in station)
- Clean Water Tank (in station)
- Dirty Water Tank (in station)
- Manual d'usuari (aquest document)
3. Configuració
3.1 Desembalatge i preparació
- Traieu amb cura tots els components de l'embalatge.
- Remove any protective films, stickers, or foam inserts from the robot and the station.
- Assegureu-vos que tots els components enumerats a la secció 2 siguin presents i no estiguin danyats.
3.2 Placing the Self-Emptying and Mop Cleaning Station
- Place the station on a hard, level surface against a wall.
- Ensure there is at least 1 meter (3 feet) of clear space in front of the station and 0.5 meters (1.5 feet) on either side to allow the robot to dock properly.
- Keep the station away from direct sunlight, heat sources, and areas with high humidity.
- Connecteu l'adaptador de corrent a l'estació i després a una presa de corrent.
3.3 Omplir el dipòsit d'aigua neta
- Open the lid of the clean water tank on the station.
- Fill the tank with clean tap water up to the MAX line. Do not use detergents or cleaning solutions not approved by Cecotec.
- Close the tank lid securely.
3.4 Instal·lació dels raspalls laterals
- Gireu el robot cap per avall.
- Align the side brushes with the corresponding posts (L for left, R for right) and press them down until they click into place.
3.5 Càrrega inicial
- Place the robot onto the charging contacts of the station. Ensure the charging contacts on both the robot and the station are aligned.
- El robot començarà a carregar-se automàticament. Deixeu que es carregui completament abans del seu primer ús (aproximadament 4-6 hores).
3.6 Mobile Application Connection
- Descarrega l'aplicació oficial de Cecotec Conga des de la botiga d'aplicacions del teu telèfon intel·ligent.
- Follow the in-app instructions to register an account and connect your Conga Z100 X-Treme robot. This typically involves connecting to the robot's Wi-Fi network during the setup process.
4. Instruccions de funcionament
4.1 Engegada/apagada
- Encès: Press and hold the power button on the robot until the indicator lights illuminate.
- Apagar: Premeu i manteniu premut el botó d'engegada fins que els llums indicadors s'apaguin.
4.2 Inici d'un cicle de neteja
- Ensure the robot is fully charged and the clean water tank is filled (for mopping).
- Press the clean button on the robot or use the mobile app to start a cleaning cycle. The robot will automatically leave the station and begin cleaning.
- To pause cleaning, press the clean button once. Press again to resume.
- To send the robot back to the station, press the home button on the robot or use the app.
4.3 modes de neteja
The robot offers various cleaning modes accessible via the mobile application:
- Mode automàtic: El robot neteja intel·ligentment tota l'àrea cartografiada.
- Mode local: Neteja una petita zona específica amb un esforç concentrat.
- Mode de vora: Neteja les parets i les vores dels mobles.
- Neteja de zones: Allows you to define specific areas on the map for cleaning.
4.4 AI Navigation and Obstacle Avoidance
The Conga Z100 X-Treme utilizes AI with LaserEye technology for precise navigation. It identifies small objects, different floor types, and dirt levels, adapting its cleaning strategy accordingly. This allows it to navigate complex environments and avoid obstacles effectively.
4.5 AquaCycle Professional Mopping
The AquaCycle system ensures continuous mopping with clean water. The robot wets the bimaterial mop with clean water and wrings out dirty water into a separate tank, providing efficient and hygienic floor cleaning.
4.6 Wet&Protect Technology
The robot's intelligent mopping adapts to different surfaces. Its bimaterial mop provides deep cleaning with a super-absorbent side. When a carpet is detected, the robot activates CarpetCare mode and uses the smooth side of the mop to protect the carpet from moisture.
4.7 Potència de succió
With an Ungravity motor providing 20000 Pa of suction power, the robot effectively cleans hidden dirt, even from high-pile carpets and deep tile grout.
5. Manteniment
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum and mop.
5.1 Self-Emptying Station Maintenance
- Substitució de la bossa de pols: The station automatically empties the robot's dust bin into a disposable dust bag. Replace the dust bag when the indicator light on the station signals it is full (approximately every 12 weeks, depending on usage).
- Dipòsit d'aigua neta: Refill with clean water before each mopping cycle.
- Dipòsit d'aigua bruta: Empty and rinse the dirty water tank after each mopping cycle to prevent odors and bacterial growth.
- Assecat amb mopa: The station dries the mop with hot air after cleaning. Ensure the mop is properly positioned for effective drying.
5.2 Neteja de components del robot
- Pinzell principal: Regularly remove hair and debris from the main silicone brush. Use the cleaning tool provided.
- Raspalls laterals: Check for tangled hair or debris and clean as needed. Replace if worn or damaged.
- Bimaterial Mop Pad: Remove the mop pad after each mopping cycle and wash it thoroughly. It can be hand-washed or machine-washed (follow care instructions).
- Sensors: Wipe the cliff sensors, wall sensors, and charging contacts with a clean, dry cloth to ensure proper function.
- Rodes: Clean any hair or debris from the robot's wheels.
6. Solució De Problemes
If you encounter issues with your Conga Z100 X-Treme, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El robot no s'encén. | Bateria baixa; botó d'engegada no premut correctament. | Place robot on charging station; press and hold power button for 3 seconds. |
| El robot no pot trobar l'estació de càrrega. | Station obstructed; robot too far from station. | Ensure clear space around station; manually place robot closer to station. |
| Mal rendiment de neteja. | Brushes or filters dirty/worn; dust bin full. | Clean/replace brushes and filters; empty dust bin. |
| El robot es queda encallat sovint. | Obstacles (cables, small objects); uneven surfaces. | Clear the cleaning area of obstacles; use virtual walls/no-go zones in app. |
| Problemes de connectivitat de l'aplicació. | Incorrect Wi-Fi password; router too far; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; reset robot's Wi-Fi. |
| Mopping leaves streaks or is ineffective. | Mop pad dirty/worn; clean water tank empty; dirty water tank full. | Clean/replace mop pad; refill clean water tank; empty dirty water tank. |
| Error de la bomba d'aigua. | Pump malfunction; blockage in water lines. | Check for blockages; contact customer support if issue persists. |
For persistent issues not covered here, please refer to the official Cecotec support channels.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Cecotec |
| Nom del model | Conga Z100 X-Treme |
| Número de model | A01_EU01_119672 |
| Potència d'aspiració | 20000 Pa |
| Capacitat de la bateria | 5200 mAh |
| Tecnologia de navegació | AI with LaserEye |
| Sistema de fregar | AquaCycle Professional Mopping, Wet&Protect Technology, Bimaterial XXL Mop |
| Self-Emptying Station | Yes, with hot air mop drying |
| Capacitat de la bossa de pols | 3 litres |
| Capacitat del dipòsit d'aigua neta | 3 litres |
| Capacitat del dipòsit d'aigua bruta | 3 litres |
| Dimensions del robot (L x A x A) | 35.2 x 35.2 x 10.5 cm |
| Pes del robot | 4.92 kg |
| Voltage | 240 Volts |
| Tipus de control | Control d'aplicacions |
8. Garantia i Suport
Your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or to inquire about replacement parts and consumables, please contact Cecotec customer service through their official weblloc web o la informació de contacte que es proporciona a la documentació de la garantia.
Always ensure you have your product model number (A01_EU01_119672) and proof of purchase available when contacting support.
