Manual d'usuari de l'escàner OBD2 THINKCAR THINKSCAN 662

1. Introducció

The THINKCAR THINKSCAN 662 is an advanced OBD2 diagnostic scanner designed for comprehensive vehicle system analysis. This tool supports diagnostics for Engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission systems. It features full bi-directional control capabilities and offers lifetime free software updates to ensure compatibility with the latest vehicle models and diagnostic functions.

Les característiques clau inclouen:

• 4-System Diagnostics: Covers Engine, ABS, SRS, and Transmission.
• 12 funcions de reinici: Includes ABS Bleeding, Airbag Reset, Battery Matching, Brake-pad Reset, DPF Regeneration, Electronics Throttle Adaption, Gearbox Learning, Anti-theft/Key Matching, Injector Coding, Oil Reset, Steering Angle Reset, and TPMS Reset.
• CAN FD & FCA SGW Support: Ensures compatibility with modern vehicle communication protocols.
• Actualitzacions gratuïtes de per vida: Provides continuous software enhancements and vehicle coverage.
• Control bidireccional: Allows the tool to send commands to vehicle systems for active testing.

2. Configuració

Follow these steps to set up your THINKCAR THINKSCAN 662 OBD2 Scanner:

1. Unboxing: Carefully remove the THINKSCAN 662 device, the OBD2 diagnostic cable, and the USB charging cable from the packaging.
2. Alimentació del dispositiu: The device is corded and charges directly from the vehicle's OBD2 port. Connect the diagnostic cable to the 9-pin serial connector port located at the top of the THINKSCAN 662 device.
3. Connexió al vehicle: Locate your vehicle's OBD2 port (typically under the dashboard on the driver's side). Plug the other end of the diagnostic cable into the vehicle's OBD2 port. Ensure the vehicle's ignition is in the 'ON' position (engine can be off or running, depending on the diagnostic task).
4. Engegada inicial: The device will power on automatically once connected to the vehicle. If not, press the power button located on the top right side of the device.
5. Càrrega: The device charges via the OBD2 port when connected to a vehicle. A separate USB charging cable is provided for software updates or if external charging is required. The device also features a USB port and an SD card slot on the side for data transfer and storage.

Figura 1: The THINKCAR THINKSCAN 662 OBD2 Scanner showing its main unit, diagnostic cable, and key feature icons.

3. Instruccions de funcionament

The THINKSCAN 662 features a 6.2-inch touchscreen display for intuitive navigation. Use the touchscreen or the physical buttons on the right side of the device to interact with the menus.

3.1. Navegació del menú principal

El menú principal ofereix accés a diverses funcions:

• Diagnosticar: Initiates vehicle diagnostics.
• Manteniment: Accesses special reset and service functions.
• Actualització: For software updates.
• Més: Contains additional tools and settings.

3.2. Vehicle Diagnostics

To perform a vehicle diagnostic scan:

1. Al menú principal, seleccioneu Diagnosticar.
2. Tria Cerca automàtica to automatically identify the vehicle's VIN, make, model, and year for quick access to diagnostics. Alternatively, select Diagnosticar for manual vehicle selection or OBD for standard OBD2 functions.
3. After vehicle identification, you can select from options like Informe de salut, Escaneig del sistema, o Selecció del sistema.
4. A Informe de salut or Escaneig del sistema will quickly communicate with available modules (e.g., Engine Control Module (ECM), Transmission Control Module (TCM), Electronic Brake Control Module (EBCM), Inflatable Restraint Sensing And Diagnostic Module (IRSDM)) to check for Diagnostic Trouble Codes (DTCs).
5. A view live data, navigate to the Mòdul de control del motor (ECM) or other relevant module, then select Llegir el flux de dades. You can select specific data parameters (PIDs) to monitor. The device supports displaying up to four data streams simultaneously in a graphical format. You can switch between Metric and Imperial units.
6. For active testing, select Prova d'accionament within a module. This allows you to send commands to specific components (e.g., Air Conditioning (A/C) Compressor Clutch Relay, Cooling Fan, Fuel System) to verify their functionality.

4. Maintenance and Special Functions

The THINKSCAN 662 offers 12 specialized maintenance functions to assist with common service tasks:

• Sagnat de l'ABS: Used to push air out of the ABS pump after brake system work.
• Airbag Reset (SRS): Resets the Supplemental Restraint System after repairs.
• Battery Matching (BMS): Registers a new battery with the vehicle's battery management system.
• Brake-pad Reset (EPB): Retracts electronic parking brake calipers for pad replacement.
• DPF Regeneration (DPF): Initiates the Diesel Particulate Filter regeneration process.
• Electronics Throttle Adaption (ETS): Performs a relearn procedure for the electronic throttle body.
• Gearbox Learning (GEARBOX): Adapts the transmission control unit after repairs or replacement.
• Anti-theft/Key Matching (IMMO): Programs new keys or immobilizer components.
• Injector Coding (INJEC): Codes new injector values into the engine control unit.
• Oil Reset (OIL): Reinicia la llum de servei d'oli després d'un canvi d'oli.
• Steering Angle Reset (SAS): Calibra el sensor d'angle de direcció.
• TPMS Reset (TPMS): Reinicia el sistema de control de pressió dels pneumàtics després de la rotació dels pneumàtics o la substitució del sensor.

5. Solució De Problemes

If you encounter issues with your THINKSCAN 662, consider the following:

• El dispositiu no s'encén: Ensure the diagnostic cable is securely connected to both the device and the vehicle's OBD2 port. Verify the vehicle's ignition is on. The device draws power from the OBD2 port.
• Errors de comunicació: Check all cable connections. Ensure the vehicle's ignition is in the correct position. Try a different vehicle to rule out a vehicle-specific issue.
• Problemes de programari: Utilitzeu el Actualitza function to ensure your device has the latest software. Lifetime free updates are available.
• Incorrect Readings/Functions: Confirm the correct vehicle information (VIN, make, model, year) has been automatically or manually selected.
• Fault Code Library: Utilitza el Biblioteca de codis d'error OBD sota el Més menu to look up definitions for any retrieved DTCs.

6. Especificacions

7. Garantia i Suport

For technical assistance, warranty information, or product support, please refer to the official THINKCAR website or contact their customer service. The device includes a Assistència a distància feature accessible via the 'More' menu, allowing technical support to connect to your device remotely if needed. An Servei en línia option is also available for direct support.