1. Introducció
Thank you for choosing the EGLO Moschella LED Ceiling Lamp. This manual provides essential information for the proper and safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.
2. Instruccions de seguretat
- Desconnecteu sempre l'alimentació abans de la instal·lació, el manteniment o la neteja.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb les normatives locals de cablejat.
- Assegureu-vos que la superfície de muntatge pugui suportar el pes de l'aparell.
- Do not modify the fixture in any way. Unauthorized modifications may void the warranty and create safety hazards.
- Aquest producte està dissenyat només per a ús interior.
- Avoid direct contact with the LED light source when the fixture is powered on, as it may be hot.
3. Contingut del paquet
Si us plau, comproveu que tots els components siguin presents i no estiguin danyats abans de la instal·lació.
- Làmpada de sostre LED EGLO Moschella Lamp (Model 902148)
- Materials de muntatge (cargols, tacs de paret)
- Manual d'instruccions
Image 3.1: Packaging of the EGLO Moschella LED Ceiling Lamp, showing product dimensions and technical specifications.
4. Guia d'instal·lació
4.1 Preinstal·lació
- Desconnecteu l'alimentació principal al disjuntor abans de començar qualsevol treball elèctric.
- Unpack the fixture and inspect it for any damage.
4.2 Adjusting Color Temperature (Dip Switch)
The EGLO Moschella LED Ceiling Lamp features a convenient Dip Switch on the back of the fixture, allowing you to select your preferred light color temperature before mounting. This switch must be set prior to installation.
- Locate the Dip Switch on the rear side of the lamp.
- Select between Warm White (2700 Kelvin / 1170 lumens) for a cozy atmosphere or Cool White (6500 Kelvin / 1150 lumens) for a more invigorating and functional light.
- Ensure the switch is firmly in the desired position.
Image 4.1: The EGLO Moschella LED Ceiling Lamp. The Dip Switch is located on the rear of the central mounting base.
4.3 Muntatge i cablejat
- Mark the drilling points on the ceiling using the lamp's mounting bracket as a template.
- Perforeu forats i inseriu els tacs de paret adequats (si cal).
- Connect the electrical wires from the ceiling to the terminal block on the lamp. Ensure correct polarity (Live, Neutral, Earth).
- Fixeu el suport de muntatge al sostre amb els cargols proporcionats.
- Adjunteu la lamp fixture to the mounting bracket, ensuring it is securely fastened.
- Restore power at the circuit breaker and test the light.
Image 4.2: The EGLO Moschella LED Ceiling Lamp installed on a ceiling, demonstrating its aesthetic integration into a room.
5. Instruccions de funcionament
Once installed and powered, the EGLO Moschella LED Ceiling Lamp operates via your standard wall light switch. The selected color temperature (Warm White or Cool White) will remain active until manually changed using the Dip Switch (requires power disconnection and re-accessing the switch).
6. Manteniment
6.1 Neteja
- Ensure the power is off and the fixture is cool before cleaning.
- Netegeu l'aparell amb un drap suau, sec o lleugerament humit.amp tela.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
6.2 Font de llum LED
The LED light source in this fixture is designed for long-term use and is not user-replaceable. If the LED light source fails, the entire fixture may need to be serviced or replaced. Contact EGLO customer support for assistance.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén | Sense font d'alimentació Cablejat solt Interruptor defectuós | Comproveu l'interruptor de circuit i l'interruptor de paret. Verifiqueu les connexions del cablejat (assegureu-vos que no hi hagi corrent). Prova l'interruptor de paret. |
| La llum parpelleja | Cablejat solt Incompatible dimmer (if applicable) | Comproveu les connexions del cablejat (assegureu-vos que no hi hagi corrent). This fixture is not specified as dimmable. Do not use with a dimmer unless explicitly stated by EGLO. |
| Color de llum incorrecte | Dip Switch set incorrectly | Disconnect power, access the Dip Switch on the back of the fixture, and adjust to the desired setting (Warm White or Cool White). |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 902148 |
| Marca | EGLO |
| Material | Metall, plàstic |
| Color | Negre, Blanc |
| Font d'alimentació | Elèctric amb cable |
| Wattage | 9.7 watts |
| Tipus de bombeta | LED integrat |
| Color Temperature (selectable) | 2700K (blanc càlid) / 6500K (blanc fred) |
| Flux lluminós | 1170 lumens (2700K) / 1150 lumens (6500K) |
| Dimensions (L x A x A) | 37.5 cm x 37.5 cm x 4 cm |
| Pes | 500 g |
| Classe d'eficiència energètica | E |
| Característiques especials | Dip Switch for color temperature selection |
| Ús previst | Indoor (Living Room, Bedroom, Hallway, Office, Kitchen) |
9. Garantia i Suport
EGLO products are manufactured to high-quality standards. For information regarding the manufacturer's warranty, please refer to the documentation provided with your purchase or visit the official EGLO website. If you encounter any issues or require technical assistance, please contact EGLO customer support or your retailer.
Extended warranty options may be available from third-party providers, such as Assurant, as offered at the point of purchase. These extended warranties are separate from the manufacturer's warranty and cover additional terms and durations.
10. Eliminació
This product contains electronic components and should not be disposed of with regular household waste. Please dispose of it at an authorized collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.
