1. Introducció
This manual provides essential information for the safe and efficient operation of your FLSUN S1 3D Printer. The FLSUN S1 is an advanced delta-type FDM 3D printer designed for high-speed and precise printing. It features a fully enclosed structure, AI-assisted functions, and broad material compatibility. Please read this manual thoroughly before using the printer.
Figura 1: Frontal view of the FLSUN S1 3D Printer, showcasing its sleek, enclosed design and user interface.
2. Informació de seguretat
Observeu sempre les següents precaucions de seguretat per evitar lesions o danys a la impressora:
- Assegureu-vos que la impressora estigui col·locada sobre una superfície estable i anivellada.
- Feu funcionar la impressora en una zona ben ventilada.
- Do not touch the nozzle or heated bed during operation, as they reach high temperatures.
- Mantingueu els nens i les mascotes allunyats de la impressora durant el funcionament.
- Feu servir només l'adaptador de corrent que s'inclou amb la impressora.
- The FLSUN S1 features a closed structure and dual filtration system to optimize air quality during printing, blocking 99% of particulate matter and volatile organic compounds. However, proper ventilation is still recommended.
- Unplug the printer before performing any maintenance or cleaning.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- FLSUN S1 3D Printer
- Cable d'alimentació
- Manual d'usuari (aquest document)
- Tool Kit (includes necessary tools for assembly and maintenance)
- Sampel Filament
4. Configuració
The FLSUN S1 is designed for quick setup, allowing you to begin printing in approximately 10 minutes from unboxing.
- Desembalatge: Traieu amb cura la impressora i tots els accessoris de l'embalatge. Conserveu l'embalatge per a futurs transports o emmagatzematges.
- Col·locació: Place the printer on a stable, level surface with adequate space around it for ventilation and access.
- Connexió d'alimentació: Connect the power cable to the printer and then to a grounded power outlet.
- Encesa inicial: Turn on the printer using the power switch. Follow the on-screen prompts for initial setup.
- Anivellació automàtica: The FLSUN S1 features fully automatic bed leveling. Initiate the auto-leveling process via the touchscreen interface as prompted during initial setup or from the settings menu.
Figure 2: The FLSUN S1's touchscreen interface showing the one-button automatic leveling function and an indicator for automatic material shortage recordatori.
- Càrrega del filament: Load your chosen filament into the designated slot. The direct drive extruder system will guide the filament. Refer to the on-screen instructions for proper loading.
Figure 3: Illustration of the FLSUN S1's fully enclosed delta structure, highlighting the cylindrical build volume with a diameter of 320mm and height of 430mm.
5. Instruccions de funcionament
The FLSUN S1 is designed for high-speed and precise 3D printing.
5.1 Procés d'impressió
- Preparació del model: Use a compatible slicing software to prepare your 3D model (.STL, .OBJ, etc.) and generate a G-code file.
- Codi G de transferència: Transfereix el codi G file a la impressora mitjançant USB o connexió de xarxa.
- Selecciona i inicia la impressió: On the printer's touchscreen, select your G-code file and initiate the print. The printer will automatically preheat the nozzle and bed to the required temperatures.
- Impressió del monitor: Monitor the printing process. The built-in AI Camera can self-optimize print quality and proactively alert you to potential issues. Remote monitoring is also available.
- Fotografia de lapse de temps: The AI Camera can capture time-lapse videos of your prints.
Figure 4: The FLSUN S1 offers remote monitoring capabilities via a computer interface and time-lapse photography, allowing users to record and share their printing process.
5.2 Impressió d'alta velocitat
The FLSUN S1 is capable of ultra-high-speed printing with a maximum print speed of 1200 mm/s and an acceleration of 40,000 mm/s². This is achieved through its advanced delta-type 3D printing technology and optimized algorithms.
Figure 5: Visual representation of the FLSUN S1's high-speed printing specifications, including a maximum flow rate of 110mm³/s, maximum print speed of 1200mm/s, and maximum acceleration of 40,000mm/s².
5.3 Compatibilitat de materials
The FLSUN S1 supports a wide range of filament types due to its robust full-metal direct extruder, which can reach temperatures up to 350°C, and a heated bed up to 120°C. The chamber temperature can reach up to 50°C.
- Materials suportats: PLA, ABS, PETG, ASA, TPU, PVA, PET, PA, PC, and Carbon materials.
Figure 6: Diagram illustrating the FLSUN S1's temperature capabilities for multi-filament printing, showing a 350°C nozzle temperature, 50°C chamber temperature, and 120°C hot bed temperature.
5.4 Funcions avançades
- Closed-Loop Motors: Real-time position monitoring automatically adjusts to detect and correct lost steps, ensuring print accuracy.
- Compensació de vibracions: Optimized algorithms minimize vibration, ensuring print accuracy and preventing surface roughness and deformation.
- CPAP High-Pressure Turbo Fan: A fan with a wind speed of 40,000 rpm automatically adjusts its speed based on printing requirements to ensure optimal cooling and material melting, supporting high-temperature printing up to 350°C.
Figure 7: Demonstrates the effect of closed-loop motors in correcting print errors ("Before" and "After" images of a square print) and the effectiveness of vibration compensation ("OFF" and "ON" images showing print quality improvement).
6. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim de la impressora 3D FLSUN S1.
- Neteja: Regularly clean the print bed, nozzle, and interior of the printer to remove any filament debris or dust. Use a soft cloth and appropriate cleaning solutions.
- Sistema de filtració: The dual filtration system helps maintain air quality. Check and replace the filters periodically as recommended by FLSUN to ensure effective removal of particulate matter and VOCs.
- Lubricació: Apply lubricant to moving parts (e.g., linear rails) as specified in the detailed maintenance guide (if provided separately by FLSUN).
- Actualitzacions de firmware: Keep the printer's firmware updated to benefit from performance improvements and new features. Check the official FLSUN weblloc per a les darreres actualitzacions.
7. Solució De Problemes
This section addresses common issues you might encounter. For more complex problems, refer to the FLSUN support resources.
| Problema | Causa possible | Solució |
|---|---|---|
| La impressió no s'enganxa al llit | Bed not level, incorrect bed temperature, dirty print surface. | Perform automatic bed leveling. Adjust bed temperature in slicing software. Clean the print surface with isopropyl alcohol. |
| El filament no s'extrudeix | Nozzle clogged, filament tangled, incorrect nozzle temperature. | Clear nozzle clog. Ensure filament spool is free. Verify nozzle temperature is appropriate for the filament type. Check for material shortage recordatori. |
| Poor print quality (layer shifts, rough surfaces) | Vibrations, incorrect print speed, mechanical issues. | Ensure printer is on a stable surface. The S1's vibration compensation should mitigate this; if not, check for loose components. Adjust print speed. The AI Camera may alert to issues. |
| La impressora no s'encén | Cable d'alimentació desconnectat, presa de corrent defectuosa. | Check power cable connections. Test power outlet with another device. |
8. Especificacions
| Característica | Detall |
|---|---|
| Model | FLSUN S1 |
| Tecnologia d'impressió | FDM (Fused Deposition Modeling) Delta |
| Volum de construcció | 12.6 x 12.6 x 16.9 inches (320mm diameter x 430mm height) |
| Velocitat màxima d'impressió | 1200 mm/s |
| Acceleració màxima | 40,000 mm/s² |
| Tipus d'extrusora | Dual-Gear Direct Drive, Full-Metal |
| Temperatura màxima del broquet | 350 °C |
| Max Hot Bed Temperature | 120 °C |
| Temperatura de la cambra | Fins a 50°C |
| Filaments compatibles | PLA, ABS, PETG, ASA, TPU, PVA, PET, PA, PC, Carbon materials |
| Anivellació | Totalment automàtic |
| Característiques d'IA | AI Camera for print quality optimization, issue alerts, time-lapse photography |
| Filtració d'aire | Dual filtration system (blocks 99% particulate matter and VOCs) |
| Dimensions del producte | 21.6" de profunditat x 23.4" d'amplada x 40.5" d'alçada (54.9 x 59.4 x 102.9 cm) |
| Pes de l'article | 90.4 lliures (41 kg) |
| Material | Metall |
| Color | Negre |
9. Garantia i Suport
FLSUN provides comprehensive support for the S1 3D Printer.
- Garantia: FLSUN offers a 12-month after-sales service for the FLSUN S1 3D Printer.
- Suport tècnic: For any questions or support needs regarding the product, please contact FLSUN via Amazon. Support inquiries will be responded to within 24 hours.
- Recursos en línia: Visit the official FLSUN website for additional resources, FAQs, and firmware updates.
