isinwheel Electric Bike Controller M10 User Manual

1. Introducció

This manual provides essential instructions for the proper installation, operation, and maintenance of your isinwheel Electric Bike Controller, designed for the M10 electric bike model. Please read this manual thoroughly before installation and use to ensure safe and efficient performance of your electric bicycle.

2. Informació de seguretat

• Always disconnect the battery before performing any installation, maintenance, or repair work on the controller or electric bike system.
• Assegureu-vos que totes les connexions estiguin ben fixades i degudament aïllades per evitar curtcircuits.
• Avoid exposing the controller to water, extreme temperatures, or direct sunlight for prolonged periods.
• If you are unsure about any installation steps, consult a qualified electric bike technician.
• Do not attempt to open or modify the controller casing, as this will void the warranty and may cause damage or injury.

3. Contingut del paquet

• 1 x isinwheel Electric Bike Controller (Model GLX-M0003US-)

4. Especificacions

5. Configuració i instal·lació

The isinwheel Electric Bike Controller is designed for integration into the M10 electric bike system. Proper installation is crucial for functionality and safety. It is highly recommended that installation be performed by an experienced technician.

5.1 General Connection Overview

The controller manages power distribution from the battery to the motor and other components. It typically connects to:

• Bateria: Main power input. Ensure correct polarity.
• Motor: Output for motor power and phase signals.
• Pantalla/Panell de control: For user interface, speed settings, and system monitoring.
• Acceleració: Input for speed control.
• Pedal Assist Sensor (PAS): Input for pedal assistance.
• Palanques de fre: Input for motor cut-off during braking.

Refer to the wiring diagram provided with your M10 electric bike for specific connection points and wire colors. Ensure all connectors are fully seated and secured.

Figura 1: The isinwheel Electric Bike Controller, showing its aluminum casing with specifications printed on it and various colored wire connectors extending from one end. The specifications visible include 'Brushless Motor Controller', 'Battery Voltage: 36V', 'Cutoff Voltage: 29V', 'Current Limit: 15A', 'Mode: GLX-M0003US-', and 'Number: 240122'. A yellow XT60-style connector is also visible among the wires.

5.2 Muntatge del controlador

Mount the controller in a secure, dry location on the bicycle frame, away from direct impact zones and excessive vibration. Ensure adequate airflow around the controller for heat dissipation. Use appropriate fasteners to secure it firmly.

6. Instruccions de funcionament

Once the controller is correctly installed and all connections are verified, the electric bike system can be operated via the bike's display or control panel.

• Encès/apagat: Use the power button on your electric bike's display unit to turn the system on or off. The controller will activate upon power-on.
• Control de velocitat: Adjust the speed or power assist level using the controls on your display unit or by engaging the throttle (if installed).
• Assistència de pedals: The controller will engage motor assistance based on your pedaling input from the PAS sensor.
• Frenatge: The controller will cut off motor power when the brake levers are engaged, ensuring safe stopping.

Always operate your electric bike responsibly and in accordance with local regulations.

7. Manteniment

Regular maintenance helps ensure the longevity and reliable performance of your controller.

• Neteja: Keep the controller clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• Comprovacions de connexió: Periodically inspect all wire connections to ensure they are secure and free from corrosion or damage.
• Protecció del medi ambient: Avoid storing or operating the electric bike in conditions of extreme humidity or temperature fluctuations.
• Inspecció de danys: Regularly check the controller casing for any signs of physical damage.

8. Solució De Problemes

If you encounter issues with your electric bike's electrical system, consider the following basic troubleshooting steps:

• Sense energia:
  • Check if the battery is charged and properly connected.
  • Verify that the main power switch on the battery or display is turned on.
  • Inspect all power cables for visible damage or loose connections.
• El motor no respon:
  • Ensure the throttle or pedal assist sensor is correctly connected and functioning.
  • Check motor phase wires and Hall sensor wires for secure connections.
  • Verify that the brake levers are not stuck in the engaged position, which would cut motor power.
• Comportament erràtic:
  • Inspect all wiring for signs of fraying, pinching, or water ingress.
  • Ensure the controller is securely mounted and not vibrating excessively.

If these steps do not resolve the issue, please contact isinwheel customer support or a certified electric bike repair center.

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official isinwheel weblloc web. Conserveu el rebut de compra com a comprovant de compra.

10. Informació del fabricant

Fabricant: Shenzhen Xincheng Times Technology Co., Ltd.

Controller Manufacturer (as per label): GALAXY BICYCLE CO.,LTD