1. Producte acabatview
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Full Motion TV Wall Mount, Model CT140L-FBA. This mount is designed to securely hold 26-65 inch flat and curved screens, offering extensive adjustability for optimal viewing.
Les característiques clau inclouen:
- Ultra-Long Extension: Extends from 2.9 inches to 37.4 inches from the wall.
- Compatibilitat universal: Supports VESA patterns from 200x200mm to 400x400mm and TVs weighing up to 77 lbs (35 kg).
- Full Motion Adjustment: Allows for +5°/-10° tilt, ±90° swivel, and ±4° leveling.
- Construcció resistent: Built from reinforced steel with a three-section five-arm structure for stability.
- Gestió integrada de cables: Includes cable ties to keep wires organized.
2. Informació de seguretat
WARNING: Read all instructions carefully before installation. Incorrect assembly or installation may result in serious injury or damage.
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- This mount is designed for installation on concrete walls, brick walls, or wooden stud walls. NO el munteu sol sobre plaques de guix.
- Always use appropriate safety equipment, such as eye protection, during installation.
- Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un professional qualificat.
- Mantingueu els nens i les mascotes allunyats de la zona de treball durant la instal·lació.
3. Contingut del paquet
Verify that all components are present before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.
El contingut típic del paquet inclou:
- Muntatge de la placa de paret
- Braços de suport per a TV
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- Nivell de bombolla
- Brides de cable (5 peces)
- Manual d'instruccions
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | BONTEC |
| Número de model | CT140L-FBA |
| Mides de TV compatibles | 26-65 polzades |
| Capacitat màxima de pes | 77 lliures (35 kg) |
| Compatibilitat VESA | 200x200mm a 400x400mm |
| Extensió des de la paret | 2.9 polzades (retret) a 37.4 polzades (estès) |
| Angle d'inclinació | +5° / -10° |
| Angle de gir | ±90° |
| Ajust de nivell | ±4° |
| Material | Acer reforçat |
| Color | Negre |
5. Configuració i instal·lació
Before you begin, ensure you have the necessary tools: a drill, stud finder (for wood studs), pencil, measuring tape, and a hammer (for concrete/brick anchors). A bubble level is included with the mount.
5.1. Wall and TV Compatibility Check
Confirm your TV's VESA pattern and weight are within the mount's specifications. The mount supports VESA patterns from 200x200mm to 400x400mm and a maximum weight of 77 lbs. This mount is compatible with concrete, brick, and wooden stud walls. Do not install on drywall alone.
This image illustrates the wide compatibility of the mount with various wall types (concrete, wood stud, brick) and VESA patterns, indicating a maximum load capacity of 77 lbs. It explicitly warns against mounting on drywall alone.
5.2. Passos d'instal·lació
For a detailed visual guide, please watch the official installation video below.
Official BONTEC CT140L Installation Guide video. This video provides step-by-step visual instructions for mounting the TV bracket to the wall and attaching the TV.
- Configure and Assemble Monitor Plate: Depending on your TV's VESA pattern, assemble the monitor plate using the provided screws (M-A/B/C/D/E/F) and arms (E, F).
- Attach VESA Plate to the Back of Your TV: Secure the assembled VESA plate to the back of your TV using the appropriate screws (M-G/H or M-I/J/K) and washers. Ensure a snug fit.
- Secure the Wall Plate to the Wall:
- For Wooden Stud Walls: Use a stud finder to locate the center of a wooden stud. Mark the drilling points using the wall plate as a template. Drill pilot holes and secure the wall plate using the provided lag bolts and washers.
- Per a parets de maó o formigó: Mark the drilling points. Drill holes using a masonry drill bit. Insert the concrete anchors flush with the wall. Secure the wall plate using the provided lag bolts and washers. Avoid drilling into mortar lines between bricks.
- Hang the TV onto the Wall Plate: Carefully lift your TV with the attached VESA plate and hook it onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanism.
6. Instruccions de funcionament
Your BONTEC Full Motion TV Wall Mount offers versatile adjustments for optimal viewdes de diferents posicions.
6.1. Adjusting Tilt, Swivel, and Level
- Inclinació: The mount allows for a tilt range of +5° (upward) to -10° (downward). Use the tool-free tilt mechanism to adjust the vertical viewangle de ing.
- Girar: The articulating arm allows for a ±90° swivel, enabling you to turn your TV left or right to suit your viewposició d'ingrés.
- Nivell: If your TV is not perfectly level after installation, you can adjust it by ±4° using the leveling screws on the TV plate.
This image demonstrates the tilt (+5°/-10°) and level (±4°) adjustment features of the full motion TV mount, allowing for flexible screen positioning.
This image illustrates the ±90° swivel function of the mount, highlighting its ability to provide optimal viewing angles from various locations within a room.
6.2. Gestió de cables
Use the included cable ties to route and secure your TV cables along the articulating arms. This helps maintain a tidy appearance and prevents cables from getting tangled or damaged during adjustments.
This image highlights key design elements of the mount, including the tool-free tilt mechanism, heavy-duty square tube construction, integrated Velcro cable organizer, and smooth brass washers for fluid movement.
Official BONTEC CT140L Product Showcase video. This video demonstrates the various features and movements of the TV wall mount, including extension, swivel, and cable management.
7. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Netegeu el suport amb un drap suau i sec per eliminar la pols. Eviteu netejadors o dissolvents abrasius.
- Comprovacions periòdiques: Annually, check all screws and bolts to ensure they are securely tightened. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
- Lubricació: The mount features smooth brass washers for durable adjustments. No additional lubrication is typically required.
8. Solució De Problemes
If you encounter any issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:
| Problema | Possible solució |
|---|---|
| El televisor no està anivellat després de la instal·lació. | Use the ±4° level adjustment feature on the TV plate to correct the angle. |
| La muntura sembla fluixa o inestable. | Re-check all wall mounting bolts and TV attachment screws to ensure they are securely tightened. Verify the wall type is appropriate for installation. |
| Difficulty adjusting tilt or swivel. | Ensure no cables are obstructing movement. Check for any debris in the joints. The mount is designed for smooth movement; excessive force should not be necessary. |
| Falten peces. | Contact BONTEC customer support for assistance. |
9. Garantia i Suport
Your BONTEC TV Wall Mount is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BONTEC weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
For technical support, replacement parts, or any questions regarding your product, please contact BONTEC customer service through their official channels. Contact information can typically be found on the product packaging or the BONTEC weblloc.
