Neretva CP6100U Professional 15 Bar Espresso Machine User Manual

1. Configuració

Before first use, ensure all packaging materials are removed from the espresso machine and its accessories. Clean the water tank, portafilter, and filter baskets with warm water and mild detergent. Rinse thoroughly.

1.1 Components inclosos

• Neretva Espresso Coffee Machine x1
• Tamper x1
• Coffee Scoop x1
• 1-Cup Filter Basket x1
• 2-Cup Filter Basket (Non-Pressurized) x1
• Portafilter x1
• 350ml Milk Frothing Pitcher x1
• Dosing Ring x1

1.2 Instal·lació i ompliment del dipòsit d'aigua

The espresso machine features a removable water tank with a capacity of 60 ounces (approximately 1.8 liters). To fill, lift the tank from the back of the machine, fill with fresh, cold water, and securely place it back into position.

Image: The Neretva CP6100U Espresso Machine, showcasing its sleek design and visible water tank.

1.3 Connexió d'alimentació

Connect the machine to a standard 110V AC power outlet. Ensure the power switch is in the 'off' position before plugging in.

2. Instruccions de funcionament

2.1 Initial Heat-Up

Turn on the machine using the power switch. The digital display will show the current temperature. The machine features an instant heating boiler design, reaching the ideal extraction temperature of 198°F (92°C) quickly, typically within 25 seconds.

Imatge: Interna view of the instantaneous boiler for rapid heating.

2.2 Preparació de l'espresso

1. Mida de la mòlta: For optimal espresso extraction, use a fine grind. The texture should be slightly finer than table salt, powdery but with a bit of roughness to the touch. Avoid grinds that are too coarse (like rock salt or sand) or too fine (like flour).
2. Dosificació: For the 1-cup filter basket, use 13-14g of ground coffee. For the 2-cup filter basket, use 19-20g of ground coffee. The included dosing ring can assist in minimizing mess during this step.
3. Tamping: Utilitzeu la tamper to press the coffee grounds firmly and evenly. After tamping, the surface of the coffee should be approximately 1-2mm below the filter rim. A tamping force of around 13 kgf is recommended for optimal results.
4. Inseriu el portafiltre: Attach the filled and tamped portafilter to the brew head. Turn it firmly to the right until it is securely locked in place.
5. Extracció: Place your espresso cup(s) on the drip tray. The machine offers both manual and automatic pour options. The visible pressure gauge and temperature display provide precise readings, allowing you to monitor the extraction process. Aim for the 'Optimal Extraction' range on the pressure gauge for the best results.

Image: Close-up of the machine's control panel, showing the LCD temperature display and visible pressure gauge for monitoring extraction.

Image: Detail of the 58mm commercial-grade brew head with 400+ extraction mesh holes for even extraction.

2.3 Funció de preinfusió

The machine utilizes a pre-infusion technology to ensure smoother water flow and preserve the coffee's purity, leading to a more flavorful extraction.

Image: A visual representation of the pre-infusion process, showing even water distribution over coffee grounds.

2.4 Escuma de llet

The powerful steam wand allows you to create delicate, rich milk foam for lattes and cappuccinos. Use the included 350ml milk frothing pitcher for best results. Turn the steam control knob to activate the steam wand and immerse it into the milk. Once desired foam is achieved, turn off the steam and clean the wand immediately.

Image: The powerful steam wand frothing milk for latte art.

2.5 Cup Warming Area

The top of the machine features a cup warming area to keep your espresso cups warm, ensuring your coffee stays hot longer.

Image: Cups resting on the integrated cup warming area.

2.6 Vídeos oficials de productes

3. Manteniment

3.1 Neteja de la safata de degoteig

The drip tray is removable for easy cleaning. Regularly empty and wash the drip tray with warm, soapy water to prevent overflow and maintain hygiene.

3.2 Neteja general

Netegeu l'exterior de la màquina amb un drap suau i sec.amp cloth. Do not use abrasive cleaners or scouring pads. The portafilter and filter baskets should be cleaned after each use. The machine is not dishwasher safe.

4. Solució De Problemes

4.1 Insufficient Pressure During Extraction

If you experience insufficient pressure, resulting in a less than satisfactory espresso, consider the following:

• Mida de la mòlta: A grind that is too coarse will allow water to pass through too quickly, leading to low pressure. Adjust to a finer grind.
• Coffee Grounds Quantity: Too few coffee grounds in the filter basket can also cause insufficient pressure. Ensure you are using the recommended 13-14g for a single shot or 19-20g for a double shot.
• Tamping: T insuficientamping of the coffee grounds will result in uneven water flow and low pressure. Tamp fermament i uniformement.

4.2 Automatic Pressure Relief (OPV)

The espresso maker has a built-in Over Pressure Valve (OPV) that automatically opens if the pressure becomes too high. This mechanism releases excess pressure to maintain coffee taste and quality, and prevents damage to the boiler from over-pressurization.

5. Especificacions

6. Garantia i Suport

Neretva is committed to customer satisfaction. Each product comes with lifetime technical support. For any issues with your Neretva espresso coffee machine, please contact our dedicated customer service team for assistance.