Hanchen MX-1106-RC Remote Control for Solar Gate Opener Instruction Manual

Introducció

This manual provides essential information for the proper setup, operation, and maintenance of your Hanchen MX-1106-RC Remote Control for Solar Gate Opener. Please read these instructions carefully before use to ensure optimal performance and safety. This package includes two remote control units.

Producte acabatview

Característiques clau

• Extended Control Range: Operates effectively up to 165 feet, providing convenience even in adverse weather conditions.
• Compatibilitat: Features 32-bit compatibility for reliable signal transmission.
• Construcció duradora: Made from ABS and Aluminum for enhanced longevity.
• Disseny lleuger: Easily attaches to a keychain for convenient portability.
• Quick Learning Function: Simplifies the programming process with your gate opener.

Image: The remote control offers a 165-foot control range, allowing operation of the gate from a distance, even in challenging weather. It is 32-bit compatible and constructed from ABS and Aluminum.

Image: The remote control is designed to be lightweight and durable, making it easy to carry on a keychain for long-lasting performance.

Instruccions de configuració

1. Instal·lació de la bateria

The remote control requires two 12V A23S batteries, which are included. To install or replace batteries:

1. Obriu amb cura el comandament a distància casing.
2. Insert the two 12V A23S batteries, ensuring correct polarity.
3. Tanqueu el comandament a distància casing de manera segura.

2. Configuració de l'interruptor DIP

The remote control features nine (9) DIP switches. These switches must be set to match the configuration of your original transmitter or gate opener's receiver. Each switch can be placed in three different positions: (+), (0), or (-). Do not set all switches to the same position. Refer to your existing transmitter or gate opener manual for the correct DIP switch settings.

3. Programming New Transmitter (Quick Learning)

For gate openers equipped with a 'LEARN REMOTE' or 'LEARN TRANSMITTER' button, or an ON/OFF switch, follow these steps to program your new remote control:

1. Locate the 'learning/delete' button on the main circuit board of your gate opener.
2. Press the 'learning/delete' button once.
3. Within 1 second, press any key on your new remote control dues vegades.
4. The coding process is complete. Test the remote control to ensure proper function.

Image: Illustrated guide for the 'Quick Learning' process, showing to press the 'learning/delete' button on the main board once, then any key on the remote control twice within one second.

Video: Remote Programming Example

Instruccions de funcionament

Once programmed, your Hanchen MX-1106-RC remote control can operate your solar gate opener. The remote features three buttons for various functions:

• Botó 1: Typically used for opening the gate.
• Botó 2: Typically used for closing the gate.
• Botó 3: May be used for a pedestrian opening, stop function, or other auxiliary functions depending on your gate opener model.

Press the desired button firmly to activate the corresponding function of your gate opener. Ensure you are within the effective control range for reliable operation.

Manteniment

Canvi de bateria

If the red light on the remote control is dim or flickers when a button is pressed, the transmitter battery may be weak. Replace the batteries when necessary with new A23S 12V batteries. Refer to the 'Battery Installation' section for instructions on how to open the remote control and replace the batteries.

Resolució de problemes

• El comandament a distància no respon: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if the indicator light is dim.
• Rang limitat: Ensure there are no obstructions between the remote and the gate opener receiver. Check for potential interference from other electronic devices.
• Gate not opening/closing: Verify that the remote control is properly programmed to your gate opener. Refer to the 'Programming New Transmitter' section or your gate opener's installation manual.
• Configuració de l'interruptor DIP: If you are replacing a lost transmitter, ensure the DIP switch settings on the new remote match your original transmitter or the gate opener's receiver.

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the documentation provided with your Hanchen Solar Gate Opener system or contact Hanchen customer service directly. Keep your purchase receipt for warranty claims.