ICSTATION Temperature and Humidity Meter Soldering Practice Kit User Manual

1. Introducció

This manual provides detailed instructions for the assembly, operation, and maintenance of the ICSTATION Temperature and Humidity Meter Soldering Practice Kit. This kit is designed as an educational project for electronics enthusiasts, students, and makers to learn soldering techniques while building a functional thermo-hygrometer with an OLED display and comfort indicators.

2. Producte acabatview

The ICSTATION Temperature and Humidity Meter is a DIY electronic kit that, once assembled, measures ambient temperature and humidity. It features a clear OLED display for numerical readings and a series of multi-colored LEDs and facial expressions to visually indicate temperature levels and comfort. Users can switch between Celsius and Fahrenheit temperature units and view either temperature or humidity data.

Figure 2.1: Assembled ICSTATION Temperature and Humidity Meter.

3. Contingut del paquet

Before beginning assembly, please verify that all components listed below are present in your kit. Refer to the image for visual confirmation of the included parts.

Figure 3.1: Contents of the ICSTATION Temperature and Humidity Meter Soldering Practice Kit.

• Main PCB (Printed Circuit Board)
• Display PCB with LED indicators
• Acrylic Protection Panel
• Mòdul de pantalla OLED
• Microcontroller (STC IC)
• Temperature and Humidity Sensor Module (e.g., DHT11 or similar)
• Resistències (diversos valors)
• LEDs (Red, Orange, Yellow, Green, Blue)
• Condensadors
• Push Buttons (for T/RH and °C/°F switching)
• Slide Switch (for power ON/OFF)
• USB Power Input Connector
• Cable USB
• Standoffs and Screws for assembly
• Paper Instruction Manual/Schematic

4. Instruccions de muntatge

This kit primarily uses through-hole components, making it suitable for beginners in soldering. Please follow the included paper instruction manual for detailed, step-by-step soldering guidance. It is recommended to start with smaller components like resistors and diodes, then move to IC sockets, buttons, and finally the larger modules.

Figure 4.1: Component placement on the main PCB.

Consells importants de muntatge:

• Orientació dels components: Pay close attention to the orientation of polarized components such as LEDs, diodes, and integrated circuits (ICs). Incorrect orientation can prevent the device from functioning or cause damage.
• Tècnica de soldadura: Ensure proper soldering technique, creating shiny, cone-shaped joints. Avoid cold solder joints (dull, lumpy) or solder bridges (solder connecting adjacent pads).
• OLED Display Alignment: When soldering the OLED display, ensure it is properly aligned with the mounting holes on the PCB before fully soldering its connections. This will prevent stress on the display module during final assembly.
• 3-Layer Structure: The kit is designed with a 3-layer structure (Effect Display Layer, Component Placement Layer, Protective Layer) for safety and aesthetics. Assemble these layers using the provided standoffs and screws after all soldering is complete.

Figura 4.2: Explotat view of the 3-layer structure.

Assembly Demonstration Video

Video 4.1: An official demonstration video showing the assembly process and features of the ICSTATION Temperature and Humidity Meter Soldering Project. This video provides visual guidance for component placement and soldering steps.

5. Instruccions de funcionament

Once assembled, connect the device to a 5V DC power source using the provided USB cable. The OLED display will power on and begin showing readings.

5.1 Engegada/apagada

Figure 5.1: Location of the ON/OFF slide switch.

Use the slide switch located on the side of the device to turn the unit ON or OFF. Ensure the USB power cable is connected to a suitable power source (e.g., USB wall adapter, computer USB port).

Figure 5.2: USB power input port.

5.2 Switching Between Temperature and Humidity

Figure 5.3: T/RH and °C/°F selection buttons.

Premeu el botó etiquetat T/RH to toggle the OLED display between showing the current temperature and the current relative humidity. The display will show an icon indicating the currently displayed measurement (thermometer for temperature, droplet for humidity).

Figure 5.4: OLED display icons for humidity and temperature.

5.3 Canvi entre graus Celsius i Fahrenheit

Premeu el botó etiquetat ° C / ° F to switch the temperature unit between Celsius (°C) and Fahrenheit (°F). The device retains the last selected unit even after being powered off.

Figure 5.5: OLED display showing temperature in both Celsius and Fahrenheit, highlighting the unit switch button.

5.4 LED Temperature and Comfort Indicators

The device features a vertical array of multi-colored LEDs and corresponding facial expressions to provide a quick visual reference for temperature and comfort levels.

Figure 5.6: LED color and facial expression guide for temperature and comfort.

• Per sota de 20 °C: Blue LED, Happy face.
• 20-25 °C: Green LED, Smiling face.
• 25-30 °C: Yellow LED, Neutral face.
• 30-35 °C: Orange LED, Unhappy face.
• Per sobre de 35 °C: Red LED, Angry face.

6. Manteniment

To ensure the longevity and accurate operation of your ICSTATION Temperature and Humidity Meter, follow these simple maintenance guidelines:

• Neteja: Gently wipe the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the acrylic panels or electronic components.
• Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Manipulació: Handle the device with care to prevent physical damage. Avoid dropping it or exposing it to excessive force.
• Condicions ambientals: While designed for indoor use, avoid placing the device in areas with high humidity or direct water exposure, as this can affect the sensor's accuracy and damage electronics.

7. Solució De Problemes

If you encounter issues with your ICSTATION Temperature and Humidity Meter, refer to the following common problems and solutions:

8. Especificacions

Key technical specifications for the ICSTATION Temperature and Humidity Meter Soldering Practice Kit:

• Número de model: GY21942-1
• Tipus de visualització: OLED
• Rang de mesura de temperatura: -20°C to 80°C (approx. -4°F to 176°F)
• Interval de mesura de la humitat: 0% a 100% HR
• Unitats de temperatura: Celsius (°C) / Fahrenheit (°F) commutable
• Font d'alimentació: 5 V CC (via USB)
• Material: Plastic (Acrylic panels)
• Dimensions del producte: Aproximadament 3.15 x 0.5 x 1.8 polzades (8 x 1.27 x 4.57 cm)
• Pes de l'article: Aproximadament 8 unces (227 grams)

Figure 8.1: Physical dimensions of the assembled device.

9. Informació de seguretat

When assembling and operating this electronic kit, please observe the following safety precautions:

• Seguretat de soldadura: Always work in a well-ventilated area. Use appropriate safety gear, including safety glasses, to protect your eyes from solder splatter. Avoid touching the hot tip of the soldering iron.
• Seguretat elèctrica: Ensure the power source is 5V DC. Do not use power adapters with higher voltage or incorrect polarity. Avoid touching exposed electrical contacts when the device is powered on.
• Manipulació de components: Some electronic components can be sensitive to static electricity. Handle them by their edges or leads, and consider using anti-static precautions.
• Perill d'asfixia: The kit contains small parts that could be a choking hazard for young children. Keep components out of reach of children.

10. Garantia i Suport

For any questions, technical support, or warranty inquiries regarding your ICSTATION Temperature and Humidity Meter Soldering Practice Kit, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty claims.