Stelpro Brava Electric Baseboard Heater

1. Introducció

This manual provides essential information for the safe installation, operation, and maintenance of your Stelpro Brava Electric Baseboard Heater, Model AB03029W. This unit is designed to provide efficient and silent convection heating for indoor spaces.

The Stelpro Brava heater delivers 300W of comfort at 240V (or 225W at 208V), capable of warming up to 30 sq ft. It features a durable steel construction with rounded corners and an epoxy-polyester powdercoat for a crisp matte white finish. The design ensures optimal hot air distribution and eliminates expansion and contraction noises for quiet operation.

Imatge 1.1: Frontal view of the Stelpro Brava Electric Baseboard Heater.

Image 1.2: Close-up of the heater highlighting its sturdy rounded corners.

2. Informació important de seguretat

Please read all instructions before installing or using this heater. Failure to follow these instructions may result in fire, electric shock, personal injury, or property damage.

• This heater is designed for hardwired connection only. It is not a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
• Ensure the power supply is disconnected at the main circuit breaker before attempting any installation, maintenance, or repair.
• Do not install the heater near combustible materials, curtains, or furniture. Maintain adequate clearance as specified in the installation instructions.
• No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
• This heater is equipped with full-length thermal protection with automatic reset for dependable operation. If the heater overheats, it will automatically shut off and restart once it cools down.
• Do not use this heater in wet or moist locations, such as bathrooms or laundry areas, unless specifically rated for such environments.

Image 2.1: Illustration emphasizing that the heater requires a hardwired connection and is not a plug-in device.

Image 2.2: Diagram illustrating the 240V hardwired connection requirement.

3. Configuració i instal·lació

The Stelpro Brava baseboard heater is designed for easy and fast installation. However, due to its hardwired nature, installation should be performed by a qualified professional.

3.1 Comprovacions prèvies a la instal·lació

• Comproveu que el voltage i wattage of the heater match your electrical supply (240V, 300W for this model).
• Ensure the installation location provides sufficient clearance from walls, floors, and any obstructions to allow for proper air circulation.
• Confirm that the circuit breaker for the heater circuit is turned OFF before beginning installation.

3.2 Muntatge de l'escalfador

The heater features pre-punched mounting holes for secure wall mounting. Position the heater on a flat, stable wall surface, ensuring it is level.

Image 3.1: The Stelpro Brava heater installed, demonstrating its quick and easy installation process.

3.3 Connexió elèctrica

The heater includes built-in cable clamps and universal wiring compartments on both ends for flexible electrical connections. Connect the heater to your electrical system according to the wiring diagram provided in the full installation guide (not included in this manual) and all applicable electrical codes.

3.4 Thermostat Options

This heater requires a thermostat for temperature control. You have two primary options:

1. Wall-Mounted Thermostat: Connect the heater to a compatible wall-mounted thermostat (sold separately) for centralized room control.
2. Optional Built-in Thermostat Kit: Install an optional built-in thermostat kit directly into the heater for on-unit adjustment. Compatible kits include SIBTE12F (electronic), SIBT1W (mechanical single-pole), or SIBT2W (mechanical double-pole), all sold separately.

Image 3.2: Various optional built-in thermostat kits (SIBTE, SIBT1W, SIBT2W) available for integration with the heater.

4. Instruccions de funcionament

Once properly installed and connected to a thermostat, operating your Stelpro Brava heater is straightforward.

• Encès: After installation, turn on the power at the main circuit breaker.
• Temperatura establerta: Use the connected wall-mounted or built-in thermostat to set your desired room temperature. The heater will activate when the ambient temperature falls below the set point.
• Calefacció per convecció: The Brava heater uses natural convection to circulate warm air silently throughout the room. Hot air rises from the top of the unit, drawing cooler air in from below.
• Funcionament silenciós: The unique design and absence of moving parts ensure quiet comfort without fan noise.

5. Manteniment

Your Stelpro Brava heater requires minimal maintenance to ensure optimal performance and longevity.

• Neteja: Netegeu periòdicament l'exterior de l'escalfador amb un drap suau i sec.amp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is completely cool and power is disconnected before cleaning.
• Liquidacions: Regularly check that no objects are obstructing the air intake or exhaust vents of the heater.
• Sense servei intern: There are no user-serviceable parts inside the heater. Any internal servicing should be performed by qualified personnel.

6. Solució De Problemes

If your Stelpro Brava heater is not functioning as expected, consider the following common issues:

• Sense calor:
  • Check if the circuit breaker for the heater is ON.
  • Ensure the thermostat is set to a temperature higher than the current room temperature.
  • Verify that the heater is properly hardwired and all electrical connections are secure (consult a qualified electrician if unsure).
• Heater Overheating/Shutting Off:
  • Check for any obstructions blocking the air vents. Clear any dust or debris.
  • Ensure adequate clearance around the heater as per installation guidelines.
  • The thermal protection may have activated. Allow the unit to cool down; it should reset automatically. If it frequently trips, consult an electrician.
• Sorolls inusuals:
  • The Brava heater is designed for silent operation. If unusual noises occur, ensure the unit is securely mounted and not vibrating against the wall.
  • If persistent or loud noises are heard, disconnect power and contact customer support.

For issues not resolved by these steps, contact Stelpro customer support or a qualified electrician.

7. Especificacions

Imatge 7.1: Lateral view of the Stelpro Brava heater with key dimensions indicated.

8. Garantia i Suport

Stelpro stands behind the quality of its products.

• Garantia: This product is backed by Stelpro’s 5-year limited warranty. The heating element carries a lifetime warranty for long-term peace of mind.
• Atenció al client: For technical assistance, warranty claims, or further information, please visit the official Stelpro weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.