Informació important de seguretat
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- This heater is designed for hardwired installation only. It is not a plug-in unit.
- Aquest escalfador does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Configuració i instal·lació
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Muntatge
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Connexió elèctrica
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Instruccions de funcionament
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Encès: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Ajustar el termòstat: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Funcionament silenciós: This convector heater operates silently, providing consistent warmth without fan noise.
- Ús inicial: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Manteniment
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Neteja: Netegeu periòdicament l'exterior de l'escalfador amb un drap suau i sec.amp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Eliminació de pols: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Inspecció: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- No obstruir: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Resolució de problemes
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Sense font d'alimentació. El termòstat està massa baix. Faulty wiring or thermostat. | Comproveu l'interruptor. Augmenta la configuració del termòstat. Consulteu un electricista qualificat. |
| L'escalfador no produeix prou calor. | Room size exceeds heating capacity. Airflow obstructed. Problema de calibratge del termòstat. | Ensure heater matches room size (up to 150 sq ft). Clear obstructions from grilles. Recalibrate or replace thermostat. |
| Olors inusuals durant el funcionament. | Initial burn-off of manufacturing residues. Acumulació de pols a l'element calefactor. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb el servei d'atenció al client de Stelpro o amb un electricista qualificat.
Especificacions
| Característica | Detall |
|---|---|
| Marca | Stelpro |
| Número de model | ASHC1502WCW |
| Wattage | 1500W (at 240V) / 1125W (at 208V) |
| Voltage | 240 Volts |
| Ampedat | 6.25 Amps |
| Dimensions del producte (P x A x A) | 3.94" x 28.63" x 17.56" (101 mm x 727 mm x 446 mm) |
| Pes de l'article | 15.7 lliures |
| Cobertura de calefacció | Fins a 150 peus quadrats |
| Característiques especials | Energy Efficient, Fast Heating, Noiseless |
| Factor de forma | Gabinet |
| Color | Blanc |
| Tipus de muntatge | Muntatge de paret |
| Tipus de combustible | Elèctric |
| Ús interior/exterior | Interior |
| UPC | 626296203491 |
Garantia
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- Garantia limitada d'5 any on the entire unit.
- Garantia de per vida a l'element de calefacció.
- 3 anys de garantia on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro weblloc.
Suport
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro weblloc: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.
