Bewinner L850-GL

Bewinner 4G Cat 9 LTE Wireless WAN Card (Model L850-GL) Instruction Manual

Marca: Bewinner | Model: L850-GL

1. Introducció

This instruction manual provides essential information for the proper installation, operation, and maintenance of your Bewinner 4G Cat 9 LTE Wireless WAN Card, Model L850-GL. This module is designed to provide high-speed 4G LTE mobile network connectivity for compatible laptops, enhancing your device's internet capabilities. Please read this manual thoroughly before installation and use.

Bewinner 4G Cat 9 LTE Wireless WAN Card, top view

Imatge 1.1: Part superior view of the Bewinner 4G Cat 9 LTE Wireless WAN Card. This image shows the M.2 interface card with a white label covering the main components, and two antenna connectors labeled 'WWAN Main' and 'D/G'.

2. Configuració i instal·lació

The Bewinner 4G Cat 9 LTE Wireless WAN Card is designed for easy installation into compatible laptops. It utilizes an M.2 interface.

2.1 Compatibilitat

This module is compatible with various laptop models, including but not limited to:

  • 3540, 3541, 3500
  • 5300, 5400, 5401, 5480, 5490, 5500, 5501, 5580, 5590
  • 7300, 7390, 7400, 7480

Please verify your laptop's compatibility and ensure it has an available M.2 slot for a WWAN module before proceeding with installation.

2.2 Passos d'instal·lació

  1. Apagar: Completely shut down your laptop and disconnect it from all power sources.
  2. Tauler d'accés: Carefully open the laptop's bottom access panel to expose the internal components. Refer to your laptop's specific service manual for instructions on how to do this.
  3. Localitza la ranura M.2: Identify the available M.2 slot designated for WWAN modules.
  4. Insereix el mòdul: Gently insert the Bewinner 4G Cat 9 LTE Wireless WAN Card into the M.2 slot at an angle.
  5. Mòdul segur: Press the module down and secure it with the provided screw (if applicable) or the laptop's existing retention mechanism.
  6. Connecteu les antenes: Carefully connect the laptop's internal WWAN antenna cables to the corresponding connectors on the module (Main and D/G). Ensure a secure connection.
  7. Tanca el panell: Reattach the laptop's access panel and secure it.
  8. Encès: Reconnect power and turn on your laptop.
Bewinner 4G Cat 9 LTE Wireless WAN Card with a small screw

Image 2.1: The Bewinner 4G Cat 9 LTE Wireless WAN Card shown alongside a small screw, typically used for securing the module in an M.2 slot.

After installation, your operating system should detect the new hardware. You may need to install specific drivers provided by your laptop manufacturer or the module manufacturer for full functionality.

3. Instruccions de funcionament

Once the Bewinner 4G Cat 9 LTE Wireless WAN Card is successfully installed and recognized by your system, it will enable mobile broadband connectivity.

3.1 SIM Card Insertion (if applicable)

This module requires a compatible SIM card from a mobile network operator to establish a cellular connection. Most laptops with WWAN support have a dedicated SIM card slot.

  1. Ensure your laptop is powered off.
  2. Locate the SIM card slot on your laptop (often on the side, under the battery, or near the WWAN module).
  3. Insert your activated SIM card into the slot according to the orientation indicated.
  4. Enceneu el vostre ordinador portàtil.

3.2 Connecting to a Mobile Network

After the SIM card is inserted and the system boots, the WWAN module should be detected.

  • Windows: Navigate to Network & Internet settings, then "Cellular" or "Mobile Hotspot". You should see options to connect to your mobile network.
  • Altres sistemes operatius: Consult your operating system's documentation for connecting to mobile broadband networks.

The module supports high-speed data transfer with download rates up to 450 Mbps (LTE FDD) and upload rates up to 50 Mbps (LTE FDD), depending on network conditions and operator services. It supports various network standards including LTE-TDD, LTE-FDD, and WCDMA across multiple frequency bands.

4. Manteniment

The Bewinner 4G Cat 9 LTE Wireless WAN Card is a robust electronic component designed for long-term use. Minimal maintenance is required.

  • Mantenir sec: Avoid exposing the module to moisture or extreme humidity.
  • Neteja: Ensure the laptop's internal environment, where the module is installed, remains free from dust and debris.
  • Firmware/Drivers: Periodically check for updated drivers or firmware from your laptop manufacturer or Bewinner to ensure optimal performance and compatibility.
  • Manipulació física: When handling the module, avoid touching the gold contacts directly. Use anti-static precautions.

5. Solució De Problemes

If you encounter issues with your Bewinner 4G Cat 9 LTE Wireless WAN Card, consider the following troubleshooting steps:

  • Mòdul no detectat:
    • Assegureu-vos que el mòdul estigui correctament col·locat a la ranura M.2.
    • Verify that the securing screw is tightened.
    • Check your laptop's BIOS/UEFI settings to ensure the WWAN slot is enabled.
  • Sense connexió de xarxa:
    • Confirm that a valid and activated SIM card is inserted correctly.
    • Check if the antenna cables are securely connected to the module.
    • Ensure you have installed the correct drivers for the WWAN module.
    • Verify that your mobile network operator's service is active in your area.
    • Reinicieu el vostre ordinador portàtil.
  • Velocitats lentes:
    • Network performance can vary based on location, signal strength, and network congestion.
    • Ensure your mobile data plan supports the desired speeds.
    • Comproveu si hi ha actualitzacions de controladors.
  • Problemes del controlador:
    • Reinstall the drivers for the WWAN module.
    • Check the Device Manager (Windows) for any error indicators related to the module.

If problems persist, contact Bewinner customer support or your laptop manufacturer for further assistance.

6. Especificacions

Tipus d'elementWWAN LTE 4G Card Module
MaterialPCB
InterfíciePCIe M.2
LTE/4G CategoryCAT 9
Número de partL850-GL
Tecnologia sense filsLTE FDD, LTE TDD, WCDMA
LTE/4G BandsLTE FDD B1/B2/B3/B4/B5/B7/B8/B11/B12/B13/B17/B18/B19/B21/B26/B30/B66, LTE TDD B38/B39/B41
UMTS/HSPA/WCDMA BandsB1/B2/B4/B5/B8
Velocitat de descàrrega (màx.)450 Mbps (LTE FDD), 347 Mbps (LTE TDD), 385 kbps (UMTS)
Velocitat de pujada (màx.)50 Mbps (LTE FDD), 30 Mbps (LTE TDD), 85 kbps (UMTS)
Dimensions30 x 42 x 2.3 mm (aproximadament)
Pes de l'article0.353 unces
Funcions compatibles2x2 MIMO, 3CA combination, 2CA combination, ESIM support
Bewinner 4G Cat 9 LTE Wireless WAN Card, back view

Imatge 6.1: Darrere view of the Bewinner 4G Cat 9 LTE Wireless WAN Card, showing the PCB and M.2 connector pins.

7. Assistència i garantia

For technical support, warranty information, or further inquiries regarding your Bewinner 4G Cat 9 LTE Wireless WAN Card, please refer to the official Bewinner weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Fabricant: Guanyador
Número de model de l'article: Bewinner651scqued3
ASIN: B0FSYW4686

Documents relacionats - L850-GL

Preview Guia de l'usuari de Bewinner Portable Tri-Screen per a ordinador portàtil (15 polzades)
Guia d'usuari per a la pantalla portàtil Bewinner de tres pantalles (15 polzades), que cobreix la configuració, els mètodes de connexió, la configuració de la pantalla, els paràmetres OSD i les especificacions tècniques. Compatible amb portàtils de 15 a 17 polzades.
Preview Quectel BG950S-GL LPWA IoT Module Hardware Design Guide
Comprehensive hardware design guide for the Quectel BG950S-GL LPWA IoT module, covering features, specifications, interfaces, RF, electrical characteristics, mechanical details, and more for industrial and commercial applications.
Preview Disseny de maquinari Quectel EM060K-GL i EM120K-GL
Aquest document proporciona informació detallada sobre el disseny del maquinari per a les sèries de mòduls LTE-A Quectel EM060K-GL i EM120K-GL, que cobreix les especificacions de la interfície, els detalls elèctrics i mecànics, i els dissenys de referència per a diverses aplicacions.
Preview Quectel BG770S-GL & BG950S-GL QuecCell Application Note: AT Commands for Cell Scanning
This application note from Quectel details the AT commands (AT+QENG, AT+QCELLSCAN) for BG770S-GL and BG950S-GL modules, enabling cell scanning and information retrieval for LTE Cat M1 and LTE Cat NB2 networks.
Preview Quectel BG77xA-GL & BG95xA-GL TCP/IP Application Note
This application note from Quectel provides detailed guidance on using TCP/IP AT commands for the BG77xA-GL and BG95xA-GL LPWA modules, covering socket services, data access modes, and examples for IoT development.
Preview Guia de maquinari del Fibocom FM101-GL: especificacions i integració
Guia detallada del maquinari per al mòdul Fibocom FM101-GL 4G WWAN, que cobreix les especificacions, la interfície M.2, les característiques de RF, la font d'alimentació, la USIM, l'USB, l'estructura i la integració per a fabricants d'equips originals.