Jungle Leopard Prism4 Pro X3 120mm ARGB Case Fans Instruction Manual

1. Introducció

Thank you for choosing the Jungle Leopard Prism4 Pro X3 120mm ARGB Case Fans. These fans are designed to provide efficient cooling for your computer case while offering stunning customizable RGB lighting effects. This manual provides essential information for proper installation, operation, and maintenance of your new fans.

Contingut del paquet

• Jungle Leopard Prism4 Pro X3 120mm ARGB Case Fans (Triple Pack)
• Cargols de muntatge
• Cables for power and ARGB synchronization

2. Informació de seguretat

Si us plau, llegiu i seguiu aquestes pautes de seguretat per evitar danys al producte o lesions personals:

• Ensure your computer is powered off and unplugged from the wall outlet before installation or maintenance.
• Manipuleu els components amb cura per evitar descàrregues estàtiques. Penseu en la possibilitat de fer servir una polsera antiestàtica.
• Do not attempt to modify the fans or cables. Unauthorized modifications may void your warranty and cause damage.
• Keep the fans away from liquids and excessive moisture.
• Ensure proper cable management to prevent interference with moving parts or other components.
• The power supply interface is small 4Pin and the light signal interface is 5V3Pin. Confirm your motherboard has a 5V3Pin ARGB header or acquire a separate control box for synchronization.

3. Configuració i instal·lació

Follow these steps to install your Jungle Leopard Prism4 Pro X3 ARGB Case Fans:

3.1 Preparació per a la instal·lació

• Apagueu l'ordinador i desconnecteu-lo de la font d'alimentació.
• Obriu la carcassa de l'ordinador per accedir a les ubicacions de muntatge del ventilador.
• Identify suitable locations for the 120mm fans (e.g., front, top, rear, bottom of the case).

3.2 Muntatge del ventilador

1. Position the fan in the desired mounting location. Ensure the airflow direction is correct for your cooling setup (intake or exhaust).
2. Secure the fan to the case using the provided mounting screws. Tighten screws evenly to prevent warping.
3. The fans feature double-sided shock pads to reduce vibration noise. Ensure these pads are properly seated against the case.

Image: Fans installed within a computer case, demonstrating typical mounting positions.

Image: Detail of the fan showing the vibration-proof damping pads at the corners.

3.3 Connexions de cablejat

1. Connexió d'alimentació: Connect the fan's 4-Pin power connector to an available 4-Pin fan header on your motherboard or a fan controller. These fans support PWM for speed control.
2. ARGB Lighting Connection: Connect the fan's 5V 3-Pin ARGB connector to a compatible +5V 3-Pin ARGB header on your motherboard. If your motherboard lacks this header, a separate ARGB controller (not included) is required for lighting synchronization.
3. Encadenament de margarides: The fans are designed for daisy-chaining. Connect the ARGB output of one fan to the ARGB input of the next fan to synchronize lighting effects across multiple fans.

Image: Illustration of the fan's hydraulic bearing design, lighting tandem interface, and power supply dual interface for series connection.

Nota important: Do not connect the 5V 3-Pin ARGB connector to a 12V 4-Pin RGB header. This will damage the LEDs.

4. Instruccions de funcionament

4.1 Control de velocitat del ventilador (PWM)

The Prism4 Pro X3 fans support Pulse Width Modulation (PWM) for dynamic speed control. If connected to a 4-Pin PWM fan header, your motherboard's BIOS/UEFI or operating system software can automatically adjust fan speed based on system temperature, optimizing cooling performance and noise levels. The fan speed range is 800-1800 RPM.

Image: Display of three fans and their performance metrics: Speed (800-1600 RPM), Fan Air Volume (58.36 CFM), and Fan Air Pressure (2.07 mm/H₂O).

4.2 Control d'il·luminació ARGB

The fans feature a three-sided infinity mirror ARGB light effect. The lighting can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) if connected to a +5V 3-Pin ARGB header. This allows for synchronization with other ARGB components in your system and customization of various lighting modes and colors.

Imatge: Detallada view of the infinity mirror ARGB effect on the fan, highlighting the side and intermediate circular mirror designs.

5. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil dels ventiladors:

• Neteja: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the computer is powered off and unplugged before cleaning.
• Inspecció: Check cables for any signs of wear or damage. Ensure all connections are secure.
• Do not lubricate the fan bearings. The hydraulic bearings are sealed and designed for long-term, maintenance-free operation.

6. Solució De Problemes

6.1 Els ventiladors no giren

• Ensure the 4-Pin power connector is securely plugged into a functional fan header on the motherboard or controller.
• Comproveu la configuració de la BIOS/UEFI de la placa base per assegurar-vos que el capçal del ventilador estigui habilitat i configurat correctament.
• Verify that your power supply is providing adequate power to the system.

6.2 ARGB Lights Not Working or Synchronizing

• Confirm the 5V 3-Pin ARGB connector is correctly plugged into a +5V 3-Pin ARGB header on your motherboard or a compatible ARGB controller.
• ADVERTIMENT: Do not connect to a 12V 4-Pin RGB header. This will damage the LEDs.
• Ensure your motherboard's ARGB software is installed and updated. Check its settings to enable and configure the lighting effects.
• If daisy-chaining, ensure all connections between fans are secure.
• Test individual fans if possible to isolate a faulty unit or connection.

6.3 Soroll excessiu

• Check if the fan blades are obstructed by cables or other components.
• Ensure the fan is securely mounted and screws are tightened evenly to prevent vibration. The double-sided shock pads should help mitigate this.
• Netegeu qualsevol acumulació de pols a les aspes del ventilador.
• Ajusteu la configuració de la velocitat del ventilador a la BIOS/UEFI o al programari de la placa base a unes RPM més baixes si el soroll és un problema i les temperatures ho permeten.

7. Especificacions

Image: Visual representation of fan dimensions and a table summarizing key product parameters.

8. Garantia i Suport

8.1 Informació de la garantia

Jungle Leopard products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Jungle Leopard weblloc web. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.

8.2 Suport tècnic

If you encounter any issues or have questions regarding the installation or operation of your Jungle Leopard Prism4 Pro X3 fans, please contact our customer support team. You can find contact information on the official Jungle Leopard weblloc web o a través del vostre distribuïdor.

Recursos en línia: For additional support, FAQs, and driver downloads (if applicable), please visit the Jungle Leopard Store on Amazon.