Introducció
This manual provides instructions for the safe and effective use of your VGR V-996 Professional Hair Trimmer. Please read all instructions carefully before first use and retain for future reference.
The VGR V-996 is a cordless hair and beard trimmer designed for precision grooming. It features ceramic and titanium-coated blades, a powerful 7000 RPM motor, an LED display, and a long-lasting lithium battery with USB Type-C charging.
Informació important de seguretat
WARNING: To reduce the risk of electric shock, injury, or damage, always follow these basic safety precautions:
- Mantingueu el dispositiu fora de l'abast dels nens.
- Do not use this appliance on animals.
- Avoid using the trimmer near water, in a bathtub, shower, or sink.
- Always turn off the trimmer before cleaning or attaching/detaching guide combs.
- Do not attempt to open or repair the device yourself. Contact customer support for assistance.
- Protect the trimmer from extreme temperatures and direct sunlight.
- Use the trimmer only for its intended purpose as described in this manual.
- Assegureu-vos que el cable de càrrega no estigui danyat abans d'utilitzar-lo.
Contingut del paquet
Your VGR V-996 Professional Hair Trimmer package includes:
- Retolador de cabells VGR V-996
- 4 pintes de guia (1.5 mm, 3 mm, 6 mm, 9 mm)
- Cable de càrrega USB tipus C
- Raspall de neteja
- Oli lubricant
- Blade Protection Cap
Image: VGR V-996 Hair Trimmer with its accessories, including guide combs, charging cable, cleaning brush, and oil.
Configuració i càrrega
- Càrrec inicial: Before first use, fully charge the trimmer. Connect the USB Type-C charging cable to the trimmer's charging port and plug the other end into a compatible USB power adapter (not included). The LED display will indicate charging status. A full charge takes approximately 3 hours and provides up to 300 minutes of cordless runtime.
- Col·locació de pintes guia: Select the desired guide comb (1.5mm, 3mm, 6mm, or 9mm). Align the comb with the trimmer blade and push it firmly until it clicks into place.
- Detaching Guide Combs: Gently pull the guide comb away from the blade to remove it.
Image: The VGR V-996 trimmer connected to a USB-C charging cable, illustrating the charging process.
Instruccions de funcionament
- Encès/apagat: Press the ON/OFF switch to turn the trimmer on or off. The LED display will activate upon power-on.
- Retall:
- For best results, ensure hair is clean and dry.
- Hold the trimmer with the blade flat against the skin or at a slight angle, depending on the desired cut.
- Mou el tallador de cabells lentament en la direcció contrària al creixement del pèl.
- Use the guide combs for uniform length. For detailing or close trimming, remove the guide comb.
- Mode turbo: The trimmer features a Turbo 7000 RPM motor for powerful cutting. The LED display will show the status of Turbo mode.
- Pantalla LED: The LED display shows the current battery level and indicates when Turbo mode is active.
Image: A man using the VGR V-996 trimmer to precisely shape his beard and define lines.
Imatge: Un cop mésview of the VGR V-996 trimmer's key features, highlighting the LED display, ceramic and titanium blade, powerful motor, and lithium battery.
Manteniment i Neteja
Regular cleaning and maintenance will ensure optimal performance and extend the life of your trimmer.
- Neteja de les fulles: After each use, turn off the trimmer and remove any attached guide comb. Use the provided cleaning brush to brush away loose hairs from the blades.
- Lubricació de les fulles: Periodically, apply a small drop of the lubricating oil (provided) to the blades. Turn the trimmer on for a few seconds to allow the oil to distribute evenly. Wipe off any excess oil.
- Emmagatzematge: After cleaning and oiling, place the blade protection cap over the blades. Store the trimmer in a dry, cool place, away from direct sunlight and moisture.
- Cura de la bateria: To maintain battery health, avoid completely draining the battery frequently. Recharge when the battery indicator is low.
Imatge: Una imatge detallada view of the VGR V-996 trimmer's ceramic and titanium-coated blade, emphasizing its precision cutting edge.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El tallador no s'encén. | La bateria està esgotada. | Carregueu completament la retalladora. |
| Blades are pulling hair or cutting poorly. | Les fulles estan brutes o no estan greixades. | Netegeu bé les fulles i apliqueu-hi oli lubricant. |
| La desbrossadora fa un soroll estrany. | Blades may be misaligned or dirty. | Netegeu i olieu les fulles. Si el problema persisteix, poseu-vos en contacte amb el servei d'atenció al client. |
| L'indicador de càrrega no funciona. | Cable o adaptador de corrent defectuós. | Prova un cable USB tipus C i un adaptador de corrent diferents. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | V-996 Professional |
| Material de la fulla | Ceramic, Titanium-coated Stainless Steel |
| Velocitat del motor | 7000 RPM (Turbo Mode) |
| Tipus de bateria | Bateria de liti de 2000 mAh |
| Temps de càrrega | Aprox. 3 hores |
| Temps de funcionament | Fins a 300 minuts (sense fil) |
| Interfície de càrrega | USB tipus C |
| Pintes guia incloses | 1.5 mm, 3 mm, 6 mm, 9 mm |
| Mostra | LED Digital Display (Battery Level, Turbo Mode) |
| Dimensions (LxWxH) | 16 x 4 x 3.5 cm |
| Pes | 110 g |
| Font d'alimentació | Funciona amb bateria |
| País d'origen | Xina |
Image: An internal diagram highlighting the powerful 7000 RPM motor of the VGR V-996 trimmer.
Garantia i Suport
For warranty information or customer support, please contact VGR directly using the details below:
- Fabricant: Ningbo VGR Electric Appliance Co., Ltd.
- Correu electrònic: customercare@vgrofficial.in
- Telèfon: 9667796740 (Available 10:00 AM to 6:00 PM, Monday to Saturday)
- Weblloc: www.vgrofficial.in
Si us plau, conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
