Husqvarna ST124 212cc 24 polzades Two-Stage Manual d'instruccions del bufador de neu

Introducció

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Husqvarna ST124 212cc 24-inch Two-Stage Snow Blower. Please read this manual thoroughly before operating the machine and keep it for future reference.

Figura 1: global view of the Husqvarna ST124 212cc 24-inch Two-Stage Snow Blower.

Informació de seguretat

Always prioritize safety when operating the snow blower. Failure to follow safety instructions can result in serious injury or death.

• Read and understand the entire manual before operating the machine.
• Mantingueu les mans, els peus i la roba allunyats de les peces mòbils.
• Never direct discharge towards people or property.
• Utilitzeu l'equip de protecció individual (EPI) adequat, incloent-hi protecció ocular i auditiva.
• Clear the area of foreign objects that could be thrown by the auger.
• No feu funcionar la màquina en pendents pronunciats.
• Turn off the engine and remove the key before performing any maintenance or clearing clogs.
• Reompliu el dipòsit en una zona ben ventilada amb el motor apagat i refredat.

Muntatge i muntatge

Your Husqvarna ST124 snow blower requires minimal assembly. Follow these steps to prepare your machine for operation:

1. Muntatge del manillar: Attach the lower handlebar section to the main unit using the provided bolts and knobs. Ensure all connections are secure.
2. Upper Handlebar and Control Panel: Secure the upper handlebar section to the lower section. Connect any control cables (drive, auger, chute) to their respective levers on the control panel.
3. Muntatge de la canaleta: Attach the snow discharge chute to the main unit. Ensure the chute rotator mechanism is correctly aligned and secured.
4. Sabates antilliscants: Adjust the skid shoes to the desired height. For most surfaces, a medium setting is appropriate. For gravel, raise the skid shoes to prevent picking up stones.
5. Instal·lació de pneumàtics: If not pre-installed, attach the wheels to the axle using the provided pins. Ensure tires are properly inflated (refer to tire sidewall for pressure).

Figura 2: lateral view showing the auger and tire assembly.

Instruccions de funcionament

Llista de comprovació prèvia a l'operació:

• Comproveu el nivell d'oli del motor.
• Fill fuel tank with fresh, unleaded gasoline (refer to engine manual for specific fuel requirements).
• Inspect the area to be cleared for any objects that could be thrown.
• Ensure all controls are functioning correctly.

Arrencada del motor:

Your Husqvarna ST124 features both a pull start and an electric start for convenience.

1. Vàlvula de combustible: Gireu la vàlvula de combustible a la posició "ON".
2. Asfixia: Move the choke lever to the "FULL CHOKE" position for a cold engine. For a warm engine, use "HALF CHOKE" or no choke.
3. Bombeta d'imprimació: Press the primer bulb 3-5 times (more for very cold conditions) until fuel is visible in the bulb. Do not over-prime.
4. Clau d'encesa: Insert the ignition key and turn it to the "ON" position.
5. Inici:
   • Estireu l'inici: Grasp the starter handle firmly and pull it quickly until the engine starts.
   • Arrencada elèctrica: Connect an extension cord to the electric start port and press the electric start button.
6. Escalfament: Once the engine starts, gradually move the choke lever to the "RUN" position as the engine warms up (typically 30-60 seconds).

Figure 3: Close-up of the engine, fuel valve, primer bulb, and electric start port.

Funcionament del bufador de neu:

The control panel provides easy access to all operational functions.

Figura 4: superior view of the control panel with speed and chute controls.

• Control de la unitat: Engage the drive lever to move the snow blower forward or backward. Use the speed selector to choose from multiple forward and reverse speeds.
• Control de la barrena: Engage the auger lever to activate the auger blades for snow clearing.
• Control de la rampa: Use the chute rotation lever to adjust the direction of snow discharge (180-degree rotation). Use the chute deflector lever to adjust the height and distance of the snow stream.
• Far: Activate the LED headlight for improved visibility in low-light conditions.

Manteniment

Un manteniment regular garanteix la longevitat i el rendiment òptim de la teva màquina llevaneu.

• Oli de motor: Comproveu el nivell d'oli abans de cada ús. Canvieu l'oli després de les primeres 5 hores de funcionament i, a continuació, cada 25 hores o anualment.
• Bujía: Inspeccioneu i netegeu la bugia anualment. Substituïu-la si està desgastada o bruta.
• Sistema de combustible: Use a fuel stabilizer if storing the machine for extended periods. Drain the fuel tank at the end of the season if not using stabilizer.
• Auger Blades & Scraper Bar: Inspect for wear and damage. Replace worn parts to maintain clearing efficiency.
• Pins de cisallament: Always keep spare shear pins on hand. These are designed to break to protect the gearbox from damage if the auger hits an obstruction.
• Neteja general: Clean the machine after each use, removing snow and debris.

Resolució de problemes

For more complex issues, consult a qualified service technician.

Especificacions

Garantia i Suport

For detailed warranty information, please refer to the warranty card included with your product or visit the official Husqvarna website. For technical support, replacement parts, or service inquiries, please contact Husqvarna customer service or an authorized service dealer.

Podeu trobar més informació i suport a Botiga Husqvarna a Amazon.