MONTECH King 15 PRO Micro-ATX PC Case Instruction Manual

1. Producte acabatview

The Montech King 15 PRO is a sleek Micro-ATX PC case designed for efficient airflow, easy installation, and a premium aesthetic. It features a unique 15° curved tempered glass panel, an optimized dual-chamber interior layout, and supports a variety of high-performance cooling solutions and hardware configurations. This manual provides essential information for setting up, operating, and maintaining your PC case.

Característiques principals:

• Compact Mastery with Iconic Glass Design: Unique 15° curved tempered glass panel for panoramic clarity and premium aesthetics.
• Compact Dual-Chamber Layout: Separates main hardware and cable management zones for clean builds and unobstructed airflow.
• Engineered Chimney Airflow: Bottom-to-top cooling path for direct GPU airflow and upward heat exhaust.
• Ready for Next-Gen Hardware: Supports full-size GPUs, tower coolers, and top-mounted 360mm radiators (up to 84mm thick).
• Performance That Shines 360°: Pre-installed 3x RX120 PRO and 1x AX120 PRO ARGB PWM fans for enhanced airflow and immersive lighting.

2. Especificacions

3. Case Components and Features

3.1 Curved Panoramic Glass Design

The King 15 PRO features a unique 15° curved tempered glass panel that offers a panoramic view of your internal components. This design enhances the aesthetic appeal of your build by providing unobstructed clarity.

Imatge: Un primer pla view of the MONTECH King 15 PRO's 15-degree curved tempered glass panel, highlighting its panoramic clarity.

3.2 Compact Dual-Chamber Layout

The dual-chamber design intelligently separates the main hardware components from the power supply and cable management area. This layout promotes cleaner builds, improves airflow efficiency, and allows for a more compact form factor compared to larger cases.

Image: A comparison illustrating the compact dual-chamber layout of the King 15 PRO (245mm width) next to the King 95 PRO (300mm width), emphasizing an 18% width reduction.

3.3 Engineered Chimney Airflow Design

The case is engineered with a chimney airflow design, pulling fresh air directly from the bottom to cool the GPU and exhausting hot air upwards. This bottom-to-top cooling path is optimized for lower core temperatures and peak performance, especially beneficial for oversized GPUs.

Image: A diagram showing the chimney effect cooling, with red arrows indicating hot air rising and blue arrows indicating cool air intake, optimizing airflow for the GPU.

3.4 Hardware Compatibility

The King 15 PRO supports a wide range of high-performance components:

• Longitud de la GPU: Fins a 435 mm.
• Alçada del refrigerador de la CPU: Fins a 187 mm.
• Suport del radiador: Top-mounted 120/140/240/280/360mm radiators (up to 84mm thick).
• Suport dels fans: Top (3x 120mm or 2x 140mm), Rear (1x 120mm or 1x 140mm), Bottom (3x 120mm or 2x 140mm).
• Longitud de la PSU: Up to 180mm ATX.

Image: An internal diagram of the King 15 PRO case showing maximum dimensions for CPU cooler (187mm), GPU (435mm), PSU (180mm ATX), and various fan/radiator mounting points.

3.5 Pre-installed ARGB PWM Fans

The case comes with 3x RX120 PRO and 1x AX120 PRO fans pre-installed. These fans feature optimized blade geometry and immersive 360° ARGB lighting, providing excellent airflow and customizable visual effects.

Imatge: A view of the MONTECH King 15 PRO case interior showcasing the pre-installed ARGB fans with vibrant lighting.

3.6 Panell frontal d'E/S

The conveniently located front I/O panel provides easy access to essential ports:

• Botó d'engegada
• Botó de control de LED
• 3.5mm Àudio Jack
• Ports USB tipus A.
• Port USB tipus C

4. Guia de configuració i instal·lació

Before beginning installation, ensure your workspace is clean and static-free. Refer to your component manuals for specific installation instructions.

4.1 Preparació del cas

• Carefully remove the side tempered glass panel by unscrewing the single thumb screw at the rear and gently pulling it off.
• Remove the rear metal panel by unscrewing the thumb screw and sliding it off.
• Remove the top mesh panel by gently pulling it upwards; it is a tool-less design.

4.2 Instal·lació de la placa base

• Install the necessary standoffs for your Micro ATX motherboard.
• Carefully place your motherboard onto the standoffs and secure it with screws.

4.3 Instal·lació de la unitat d'alimentació (PSU).

• The PSU mounts vertically in the rear chamber. Slide your PSU into the designated bracket and secure it with screws.
• Route the necessary power cables through the cutouts to the main chamber.

4.4 Instal·lació de la unitat d'emmagatzematge

• The case includes a removable drive cage in the rear chamber. This cage supports 2x 2.5-inch drives and 1x 3.5-inch drive.
• Install your SSDs or HDDs into the cage and secure them. Reinstall the drive cage into the case.

4.5 Instal·lació de la targeta gràfica (GPU)

• Traieu les cobertes de les ranures PCIe necessàries a la part posterior de la carcassa.
• Insert your GPU into the PCIe slot on the motherboard and secure it with screws.

4.6 Instal·lació del sistema de refrigeració

• The case comes with pre-installed fans. Additional fans or radiators can be mounted at the top, rear, and bottom as per specifications.
• Ensure proper airflow direction for optimal cooling (bottom/side intake, top/rear exhaust).

4.7 Gestió de cables

• Utilize the dual-chamber design and the included Velcro straps and tie-down points in the rear chamber to route and secure cables neatly.
• Ensure cables do not obstruct airflow or fan blades.

5. Instruccions de funcionament

5.1 Engegada/apagada

• Press the large power button on the front I/O panel to turn on your PC.
• To turn off, use your operating system's shutdown function or press and hold the power button for a few seconds.

5.2 Using Front I/O Ports

• Connect USB devices to the available USB Type-A or Type-C ports.
• Plug in headphones or a microphone into the 3.5mm audio jack.

5.3 Control d'il·luminació ARGB

• Use the dedicated LED control button on the front I/O panel to cycle through various ARGB lighting modes and colors for the pre-installed fans.
• For advanced customization, connect the ARGB headers to a compatible motherboard and use the motherboard's RGB software.

6. Manteniment

6.1 Neteja dels filtres de pols

The case features dust filters on the top and bottom to prevent dust buildup. Regularly clean these filters to maintain optimal airflow and cooling performance.

• Gently remove the top mesh panel to access the top dust filter.
• The bottom dust filter can be slid out from the rear of the case.
• Clean the filters using compressed air or by rinsing them with water (ensure they are completely dry before reinstallation).

6.2 Cleaning Glass Panels

Use a soft, lint-free cloth and a mild glass cleaner to clean the tempered glass panels. Avoid abrasive materials that could scratch the glass.

7. Solució De Problemes

Si teniu problemes amb la carcassa del vostre PC, tingueu en compte els passos habituals següents per resoldre problemes:

• Sense energia: Ensure all power cables (PSU, motherboard, components) are securely connected. Check the power outlet and PSU switch.
• Fans Not Spinning/RGB Issues: Verify fan and ARGB cables are correctly connected to the motherboard or fan hub. Check motherboard BIOS/software for fan speed and RGB settings.
• Sobreescalfament: Assegureu-vos que tots els ventiladors girin correctament i que els filtres de pols estiguin nets. Verifiqueu la instal·lació correcta dels components i l'aplicació de la pasta tèrmica.
• Connexions soltes: Recheck all internal cable connections, especially after moving the PC.

For specific component-related issues, consult the respective component manuals (e.g., motherboard, GPU, PSU).

8. Garantia i Suport

For warranty information and technical support, please refer to the official Montech weblloc web o poseu-vos en contacte amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.