ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer User Manual

1. Introducció

Gràcies per la compraasing the ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer. This device is designed to help you monitor the temperature of your refrigerator and freezer wirelessly, ensuring your food is stored at optimal temperatures. With a strong 500ft/150m wireless range and customizable alarms, you can easily keep track of temperature fluctuations.

2. Contingut del paquet

• 1 x Unitat receptora
• 1 x Unitat transmisora
• 2 x AAA Batteries (for Receiver)
• 1 x USB Charging Cable (for Transmitter)
• 1 x Manual d'usuari

3. Característiques clau

• Interval sense fil ampliat: Up to 500ft/150m using advanced RF technology for stable connection.
• Pre-Paired for Immediate Use: No complex setup required; units are pre-paired from the factory.
• Ampli rang de mesura: Accurate readings within ±0.9°F across -40°F to 158°F (-40°C to 70°C).
• Smart Temperature Alerts: Customizable high/low temperature limits with audio-visual alarms.
• Easy-to-Read Backlit Display: Shows fridge and freezer readings, Max/Min records, and low-battery status.
• Considerate Power Design: Receiver uses AAA batteries, transmitter features a rechargeable lithium battery.
• Opcions d'ubicació flexibles: Receiver has hook, stand, or magnet; transmitter has clip or stand.

4. Configuració

4.1. Receiver Battery Installation

1. Open the battery compartment on the back of the receiver unit.
2. Introduïu 2 piles AAA, assegurant-vos de la polaritat correcta (+/-).
3. Tanqueu el compartiment de la bateria de manera segura.

Note: The receiver requires 2 AAA batteries, which are included in the package.

4.2. Transmitter Charging

1. Locate the charging port on the transmitter unit.
2. Connect the provided USB charging cable to the transmitter and a standard USB power source (e.g., wall adapter, computer USB port).
3. Allow the transmitter to charge fully before first use. The charging indicator will change when fully charged.

Note: The transmitter uses a rechargeable lithium battery designed for low-temperature environments.

4.3. Initial Pairing (Pre-Paired)

The ThermoPro TP210B units are pre-paired at the factory. Simply power on both the receiver and transmitter, and they should automatically connect. If connection issues occur, refer to the Troubleshooting section.

4.4. Col·locació

Image: ThermoPro TP210B Receiver and Transmitter. The receiver displays temperatures, while the transmitter sends data from inside the appliance.

Col·locació del receptor:

• Use the integrated stand to place it on a countertop.
• Utilize the magnetic back to attach it to a metallic surface.
• Hang it using the hook on the back.
• Place the receiver in a location where you can easily view the display and hear alarms, within the 500ft/150m range of the transmitter.

Col·locació del transmissor:

• Place the transmitter inside your refrigerator or freezer.
• Use the integrated clip to attach it to a shelf or rack.
• Ensure the transmitter is not obstructed by large items that could block the wireless signal.

5. Instruccions de funcionament

5.1. Encendre/apagar

• Premeu el botó PODER button on both the receiver and transmitter to turn them on or off.

5.2. Lectura de temperatures

• The receiver's backlit LCD display will show the current temperature from the transmitter.
• The display typically shows both the current temperature and the all-time Max/Min records.

5.3. Setting Temperature Alarms

The TP210B allows you to set custom high and low temperature limits for alerts.

1. Premeu el botó ALERTA button on the receiver. The high limit will flash.
2. Utilitza el UP or ABAIX buttons to adjust the high temperature limit.
3. Premeu ALERTA again to confirm the high limit and move to the low limit setting.
4. Utilitza el UP or ABAIX buttons to adjust the low temperature limit.
5. Premeu ALERTA a third time to confirm the low limit and exit alarm setting mode.

When the temperature exceeds the set range, the receiver will emit an audio-visual alarm.

5.4. Max/Min Temperature Records

• The receiver automatically records the maximum and minimum temperatures detected since the last reset.
• Premeu el botó MAX/MIN button to cycle through current, maximum, and minimum temperature readings.
• To reset the Max/Min records, press and hold the MAX/MIN botó durant 3 segons mentre viewing the Max/Min display.

5.5. Llum de fons

• The receiver features a bright backlit display for easy reading in low-light conditions.
• The backlight will activate automatically when a button is pressed and will turn off after a short period of inactivity to conserve battery.

6. Manteniment

6.1. Neteja

• Wipe the units with a damp tela. No submergir en aigua.
• No utilitzeu netejadors abrasius ni dissolvents.

6.2. Battery Replacement (Receiver)

• When the low battery indicator appears on the receiver display, replace the 2 AAA batteries.
• Ensure proper polarity when inserting new batteries.

6.3. Transmitter Charging

• Recharge the transmitter's lithium battery when the low battery indicator appears.
• Utilitzeu el cable de càrrega USB proporcionat.

6.4. Emmagatzematge

• If storing the device for an extended period, remove the AAA batteries from the receiver.
• Emmagatzemar en un lloc sec lluny de temperatures extremes.

7. Solució De Problemes

8. Especificacions

• Interval de temperatura: -40 °F a 158 °F (-40 °C a 70 °C)
• Precisió de la temperatura: ± 0.9 ° F (± 0.5 ° C)
• Interval sense fil: Fins a 150 m (500 peus) a l'aire lliure
• Freqüència de transmissió: 433 MHz
• Potència del receptor: 2 piles AAA (incloses)
• Potència del transmissor: Rechargeable Lithium battery (included, with USB charging cable)
• Visualització: LCD retroil·luminat
• Dimensions (receptor): Aproximadament 4.33 polzades (longitud)
• Pes (article): Aproximadament 11.2 unces

9. Garantia i assistència

ThermoPro provides a warranty for this product against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official ThermoPro weblloc web o contacteu directament amb el seu servei d'atenció al client.

Oficial Weblloc: www.thermopro.com

Atenció al client: Refer to the contact information provided on the ThermoPro weblloc o embalatge del producte.