Genmitsu Kortek 5W Laser Engraver and Fume Extractor Instruction Manual

1. Informació important de seguretat

Read all safety warnings and instructions carefully before operating the Genmitsu Kortek 5W Laser Engraver and Fume Extractor. Failure to follow these instructions may result in serious injury, fire, or property damage.

Radiació làser: This product contains a Class 1 laser. Avoid direct exposure to the laser beam. Always wear the provided laser safety goggles during operation.
Perill d'incendi: Laser engraving and cutting can generate heat and sparks, potentially causing fires. Never leave the machine unattended during operation. Keep a fire extinguisher nearby.
Ventilació: Always use the fume extractor to remove smoke and harmful fumes produced during laser processing. Ensure adequate ventilation in your workspace.
Compatibilitat de materials: Only engrave or cut materials specified as safe for laser processing. Avoid materials that produce toxic fumes or are highly flammable (e.g., PVC, vinyl).
Nens i animals de companyia: Keep children and pets away from the laser engraver and fume extractor during operation.
Font d'alimentació: Use only the power adapter supplied with the device. Ensure the power source matches the specified voltage.
Parada d'emergència: Familiarize yourself with the location of the power switch and be prepared to turn off the machine immediately in case of an emergency.
Protective Shield: Ensure the protective laser shield is properly installed before operation. The machine features tilt induction for added safety, stopping operation if tilted.

Genmitsu Kortek 5W Laser Engraver safety features including Class 1 laser safety, tilt induction, protective laser shield, and included laser goggles.

Figura 1: Safety features of the Genmitsu Kortek 5W Laser Engraver, including Class 1 laser safety, tilt induction, a protective laser shield, and included laser goggles for eye protection.

2. Producte acabatview

The Genmitsu Kortek 5W Laser Engraver and Portable Fume Extractor system provides a comprehensive solution for precision laser engraving and cutting, coupled with effective fume management for a clean and safe workspace.

2.1. Kortek 5W Laser Engraver

The Kortek 5W laser engraver is designed for both detail and cutting capability. It features 35mm stepper motors for high repeatability and a compact, portable design.

Precisió: Achieves ±0.01mm repeatability for consistent results.
Potència: 5W laser module suitable for engraving and cutting various materials.
Àrea de treball: 200x150 mm (7.9x5.9 inches).
Portabilitat: Weighs only 1.2 kg (2.65 lbs).
Control: Operable via Genmitsu APP on phone or laptop.

De dalt a baix view of the Genmitsu Kortek 5W Laser Engraver showing a working area of 200mm by 150mm.

Figura 2: The working area of the Kortek 5W Laser Engraver, measuring 200mm x 150mm.

Close-up of the Genmitsu Kortek 5W Laser Engraver's 35mm stepper motor, highlighting its ultra-precise ±0.01mm repeatability.

Figura 3: The 35mm stepper motor ensures ultra-precise engraving with ±0.01mm repeatability.

Image showing the Genmitsu Kortek 5W Laser Engraver balanced against a tablet on a seesaw, illustrating its light weight of 1.2 kg (2.65 lbs).

Figura 4: The Kortek 5W Laser Engraver weighs only 1.2 kg (2.65 lbs), making it highly portable.

2.2. Portable Fume Extractor (MD2)

The portable fume extractor is designed to maintain a clean and safe working environment by filtering out smoke and odors generated during laser operations.

Sistema de filtració: Features a robust 5-layer filter system.
Control de velocitat: Three adjustable speeds for customized airflow and filtration.
Funció: Captures fine particles and eliminates odors.

Diagrama que il·lustra els 5-stage multi-filtration system of the fume extractor, including Fibre Cotton, Composite Carbon A, B, C, and a HEPA cartridge.

Figura 5: Els 5-stage multi-filtration system of the fume extractor for comprehensive air purification.

Image of the compact fume extractor showing its dimensions (128mm x 190mm x 157mm) and controls: DV 12V Power Connector, Lock, Speed Indicator, Power Switch, and Smoking Outlet.

Figura 6: Compact design and control panel of the portable fume extractor.

Side-by-side comparison showing a laser engraving process 'Before' using the fume extractor with visible smoke, and 'After' using the fume extractor with clear air.

Figura 7: Visual comparison demonstrating the effectiveness of the fume extractor in clearing smoke during laser operation.

3. Instruccions de configuració

Follow these steps to set up your Genmitsu Kortek 5W Laser Engraver and Fume Extractor.

3.1. Desembalatge i inspecció

Traieu amb cura tots els components de l'embalatge.
Verifiqueu que totes les peces que figuren a la llista d'embalatge siguin presents i no estiguin danyades. Poseu-vos en contacte amb el servei d'atenció al client immediatament si hi falta alguna peça o hi ha alguna danyada.
Conserveu l'embalatge original per a futurs emmagatzematges o transports.

3.2. Laser Engraver Assembly (if required)

The Kortek 5W laser engraver typically comes pre-assembled. If minor assembly is required, refer to the quick start guide included in the box for specific instructions on attaching the laser module or gantry components.

Assegureu-vos que tots els cargols estiguin ben ajustats.
Confirm the laser module is correctly seated and connected.
Install the protective laser shield.

3.3. Fume Extractor Setup

Place the fume extractor on a stable surface near the laser engraver.
Connect the hose from the laser engraver's enclosure (if applicable) or position the extractor's intake near the engraving area to the "Smoking Outlet" on the fume extractor.
Ensure the filter layers are correctly installed inside the fume extractor. Refer to the filter replacement section for details on filter orientation.

3.4. Connexió d'alimentació

Connect the power adapter to the laser engraver's DC 24V input.
Connect the power adapter to the fume extractor's DV 12V Power Connector.
Plug both power adapters into a suitable power outlet.

3.5. Instal·lació i connexió del programari

Download the Genmitsu APP from the official weblloc web o la botiga d'aplicacions del dispositiu.
Install the application on your phone or laptop.
Follow the in-app instructions to connect your device to the Kortek 5W laser engraver via USB or wireless connection (if supported).

4. Instruccions de funcionament

This section outlines the basic steps for operating your laser engraver and fume extractor.

4.1. Preparing for Engraving/Cutting

Preparació de l'espai de treball: Ensure your workspace is clean, well-ventilated, and free of flammable materials.
Col·locació del material: Place the material to be engraved or cut securely on the working platform. Ensure it is flat and within the 200x150 mm working area.
Ajust del focus: Adjust the laser focus according to the material thickness. Refer to the quick start guide for specific focusing procedures.
Equip de seguretat: Always wear the provided laser safety goggles before starting any operation.

Image showing the Genmitsu Kortek 5W laser module cutting 7mm pine wood in a single pass, demonstrating its cutting capability.

Figura 8: The 5W laser module is capable of cutting materials like 7mm pine wood in one pass.

4.2. Operating the Fume Extractor

Press the Power Switch on the fume extractor to turn it on.
Use the Speed Indicator button to cycle through the three adjustable speeds (low, medium, high) to match the intensity of fumes produced.
Ensure the fume extractor is running before initiating any laser operation.

4.3. Funcionament del gravador làser

Open the Genmitsu APP on your connected device.
Importa o crea el teu disseny dins del programari.
Adjust laser parameters (power, speed, passes) according to the material and desired effect. Start with lower settings for new materials and gradually increase as needed.
Inicieu el procés de gravat o tall des del programari.
Monitor the process closely. If any issues arise (e.g., fire, excessive smoke), immediately press the emergency stop button or power off the machine.
Once the process is complete, wait for the laser to cool down and for all fumes to be extracted before removing the material.

5. Manteniment

Regular maintenance ensures optimal performance and extends the lifespan of your equipment.

5.1. Laser Engraver Maintenance

Neteja de la lent: Periodically clean the laser lens with a specialized lens cleaning solution and cloth to maintain laser performance.
Neteja de la màquina: Keep the working platform and gantry free of debris and dust. Use a soft, dry cloth for cleaning.
Lubricació: Apply a small amount of lubricant to the guide rails as recommended in the detailed product manual (if applicable) to ensure smooth movement.

5.2. Fume Extractor Filter Replacement

The 5-layer filtration system requires periodic filter replacement to maintain efficiency. The frequency depends on usage and the types of materials processed.

Apagar: Disconnect the fume extractor from the power source before performing any maintenance.
Filtres d'accés: Open the filter compartment (refer to the specific product diagram for access points).
Elimina els filtres antics: Carefully remove the used filter layers. Dispose of them according to local regulations.
Instal·la filtres nous: Install new filters in the correct order:
- Fibre Cotton (1-5 um particle filtration)
- Composite Carbon A (removes harmful fumes and odors)
- Composite Carbon B (deeply removes harmful fumes and odors)
- Composite Carbon C (targeted odor removal and air regeneration)
- Ultra-high efficiency HEPA cartridge (99.95% filtration efficiency for 0.3UM particles)
Compartiment segur: Tanqueu i assegureu el compartiment del filtre.

6. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar i les seves possibles solucions.

Problema	Causa possible	Solució
Laser engraver does not power on.	Cable d'alimentació desconnectat; adaptador de corrent defectuós; problema amb la presa de corrent.	Check power connections; try a different outlet; contact support if adapter is faulty.
El làser no dispara o la sortida és feble.	Incorrect focus; dirty lens; incorrect software settings; laser module issue.	Adjust focus; clean the laser lens; verify power/speed settings in software; contact support.
Fume extractor not working or low airflow.	Power cable disconnected; clogged filters; fan obstruction.	Check power; replace filters; inspect fan for obstructions.
Excessive smoke or odor during operation.	Fume extractor off or on low speed; clogged filters; improper material.	Turn on/increase speed of fume extractor; replace filters; ensure material is laser-safe.
Engraving results are inconsistent.	Loose belts/components; incorrect material settings; unstable work surface.	Check for loose parts and tighten; calibrate settings; ensure stable surface.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Genmitsu customer support for further assistance.

7. Especificacions tècniques

7.1. Kortek 5W Laser Engraver

Potència làser: 5W
Repetibilitat: ± 0.01 mm
Àrea de treball: 200 x 150 mm (7.9 x 5.9 polzades)
Tipus de motor: 35mm Stepper Motors
Pes: 1.2 kg (2.65 lliures)
Mètode de control: Genmitsu APP (Phone/Laptop)
Característiques de seguretat: Class 1 Laser Safety, Tilt Induction, Protective Laser Shield, Laser Goggles Included
Compatible Materials (Engraving): Frosted glass, ceramic, stainless steel, wood, opaque acrylic, felt, etc.
Compatible Materials (Cutting): Wood, opaque acrylic, felt, etc.

7.2. Portable Fume Extractor (MD2)

Sistema de filtració: 5-Layer (Fibre Cotton, Composite Carbon A/B/C, HEPA)
Eficiència de filtració: 95% for 1-5 um particles (Fibre Cotton), 99.95% for 0.3UM particles (HEPA)
Control de velocitat: 3 velocitats regulables
Pes: 1.2 kg (approximate, based on image)
Dimensions: 128mm (W) x 190mm (D) x 157mm (H) (approximate, based on image)

8. Garantia i Suport

Genmitsu products are designed for quality and reliability. For detailed warranty information, please refer to the warranty card included with your product or visit the official Genmitsu weblloc.

Atenció al client:

For technical assistance, troubleshooting, or spare parts, please contact Genmitsu customer support.
Provide your product model number (Kortek 5W) and ASIN (B0FXGHJF8S) when contacting support for faster service.
Weblloc: www.sainsmart.com/pages/genmitsu (Exampl'enllaç, si us plau, verifiqueu els canals de suport oficials)

	Genmitsu Kortek Laser Engraver User Guide User guide for the Genmitsu Kortek Laser Engraver, covering setup, safety, operation, software installation, and parameters. Includes English, German, and Japanese language sections.
	Manual d'usuari del mòdul làser de focus fix amb punt comprimit de 5.5 W de Genmitsu Manual d'usuari del mòdul làser de focus fix amb punt comprimit Genmitsu de 5.5 W, que detalla les seves característiques, compatibilitat amb les màquines CNC Jinsoku i Genmitsu, instal·lació, configuració del programari amb LaserGRBL i instruccions d'enfocament.
	Manual d'usuari del gravador làser d'escriptori Genmitsu Jinsoku LC-40 Manual d'usuari complet per al gravador làser d'escriptori Genmitsu Jinsoku LC-40, que cobreix la seguretat, el muntatge, els paràmetres del producte, la configuració del programari i les guies d'operació per a PC i dispositius mòbils.
	Manual d'usuari de la màquina làser Genmitsu Kiosk Manual d'usuari de la màquina làser de quiosc Genmitsu de SainSmart, que cobreix la instal·lació, el funcionament, la seguretat, el programari i el manteniment.
	Genmitsu Kintix Laser Machine User Manual \| Setup, Operation, and Maintenance Guide Comprehensive user manual for the Genmitsu Kintix Galvanometer Laser Engraver. This guide covers setup, safety, product specifications, software installation, operation, maintenance, and troubleshooting for your laser engraving machine.
	Manual d'usuari del mòdul làser Genmitsu de 5.5 W per a CNC 3018-PROVer Manual d'usuari complet per al mòdul de focus fix làser de 5.5 W de SainSmart Genmitsu, que detalla la instal·lació, la configuració amb LaserGRBL i l'ús amb CNC 3018-PROVer i altres encaminadors basats en Grbl.