1. Instruccions de seguretat importants
Si us plau, llegiu atentament totes les instruccions abans de fer servir l'aparell. Conserveu aquest manual per a futures consultes.
- Ensure the ice maker is placed on a stable, level surface.
- Allow the unit to stand upright for at least 24 hours before first use to allow refrigerants to settle.
- No bloquegeu les obertures de ventilació de l'aparell.
- Utilitzeu només aigua potable per a la producció de gel.
- Mantingueu els nens allunyats de la màquina de gel durant el funcionament.
- Desendolleu l'aparell abans de netejar-lo o fer-ne cap manteniment.
- No feu servir l'aparell amb un cable o un endoll danyats.
2. Producte acabatview
The LifePlus Commercial Ice Maker KZB-45C is designed for efficient and convenient ice production, suitable for various settings. It features a powerful compressor, multiple ice thickness settings, and flexible water inlet options.
Imatge: Frontal view of the LifePlus Commercial Ice Maker, illustrating both faucet and self-priming water inlet connections.
Image: Diagram highlighting key features such as 110 LBS/24H production, rapid cooling, 45 ice cubes per cycle, and a 16 LBS storage bin.
Accessoris inclosos:
Image: A visual representation of all accessories provided, including an ice shovel, ice cube bags, spring buckle, inlet pipe, sewage pipe, self-suction water inlet pipe, 2-point Y-connector, instruction manual, and buckles.
The package includes an ice shovel, ice cube bags (x5), spring buckle, inlet pipe, sewage pipe, self-suction water inlet pipe, 2-point Y-connector, and buckles for easy installation and use.
3. Configuració
3.1 Desembalatge i col·locació
- Traieu amb cura tots els materials d'embalatge i inspeccioneu la màquina de gel per detectar qualsevol dany.
- Place the ice maker on a firm, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- Allow the unit to stand upright for at least 24 hours before plugging it in. This allows the compressor fluids to settle.
Image: Illustrates the compact dimensions of the ice maker (15.7 in x 14.17 in x 24.8 in) and shows examples of both freestanding and under-counter placement in a kitchen setting.
3.2 Water Inlet Options
The ice maker offers two methods for water supply:
- Tap Water Mode: Connects directly to a faucet for continuous water supply.
- Self-Priming Mode: Draws water from an external water bottle (e.g., 5-gallon jug) using the included self-priming hose.
Image: A side-by-side comparison showing the rear connections for both tap water inlet and self-priming water inlet modes.
Connecting the Water Inlet:
- For Tap Water: Connect the included water inlet pipe to the 'Tap Water Inlet' port at the rear of the ice maker. Secure the other end to your faucet using the provided connector.
- For Self-Priming: Insert the self-priming hose into the 'Self-Priming Water Inlet' port at the rear. Place the other end of the hose into a bucket or water bottle. The pump will automatically draw water when the machine operates.
Image: Close-up showing the 'Self-Priming Water Inlet', 'Tap Water Inlet', and 'Ice Storage Drain' ports at the back of the ice maker, along with instructions for disassembling the white thin tube.
3.3 Connexió de la canonada de drenatge
Connect the included drain pipe to the 'Ice Storage Drain' port at the rear of the ice maker. Ensure the other end of the drain pipe is directed into a sink or a suitable drainage system to prevent water overflow.
3.4 Installation and Usage Guide Video
Video: A detailed guide on the installation and initial usage of the LifePlus KZB-45C ice maker. This video demonstrates connecting the drain pipe, setting up water inlet modes, adjusting ice-making time, and cleaning procedures.
4. Funcionament
4.1 Preparació per al primer ús
- After connecting the water supply and drain, plug the ice maker into a grounded electrical outlet.
- It is recommended to run a self-cleaning cycle before making ice for consumption. (Refer to Section 5.1 for self-cleaning instructions).
4.2 Fabricació de gel
- Encès: Press the 'Power' button on the control panel.
- Selecciona la mida del gel: Use the 'S-Ice', 'M-Ice', or 'L-Ice' buttons to select your desired ice thickness (Small, Medium, Large).
- The machine will automatically detect the water mode (tap water or self-priming) and begin the ice-making process.
- The first ice-making cycle may take approximately 20 minutes as the compressor starts up. Subsequent cycles typically take 8-18 minutes depending on the selected thickness and ambient temperature.
Image: The ice maker's control panel, illustrating the options for customizing ice thickness (S: 8-10 Mins, M: 15 Mins, L: 18-20 Mins) and how to adjust the cycle time by pressing and holding the up/down buttons for 5 seconds.
4.3 Adjusting Ice-Making Time
To adjust the ice-making cycle time, press and hold the 'Up' or 'Down' arrow buttons on the control panel for 5 seconds. This allows for fine-tuning the ice thickness beyond the preset options.
4.4 Ice Full Indicator
When the ice storage bin is full, the 'Ice Full' indicator light will illuminate, and the ice maker will automatically pause operation. Remove ice from the bin to resume ice production.
Use the provided ice shovel to break up any large blocks of ice for easier storage and to prevent the 'Ice Full' sensor from being obstructed.
5. Manteniment
5.1 Funció d'autoneteja
The ice maker features an automatic self-cleaning mode to maintain hygiene.
- In standby mode, press the 'Clean' button.
- Adjust the cleaning duration in 5-minute increments using the 'Up' and 'Down' arrow buttons.
- A full cleaning cycle typically takes about 30 minutes.
Image: The ice maker's interior during a self-cleaning cycle, with water circulating to clean the ice-making components.
5.2 Drenatge del dipòsit d'aigua
To empty the water tank, locate the drain plug inside the ice maker (usually near the water pump). Pull up the drain plug to allow water to flow out through the connected drain pipe.
5.3 Neteja regular
- Regularly wipe down the exterior of the ice maker with a soft, damp tela.
- Clean the interior components, including the ice bin and water reservoir, with a mild detergent and warm water. Rinse thoroughly.
- Assegureu-vos que totes les peces estiguin seques abans de tornar a muntar i fer funcionar la màquina.
- Periodically check the air filter (if applicable) and clean it to maintain optimal performance.
6. Solució De Problemes
Consulteu la taula següent per veure els problemes habituals i les seves solucions.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense producció de gel | No water supply, power off, 'Ice Full' sensor blocked, low refrigerant. | Check water connections, ensure power is on, clear ice bin, contact support if refrigerant is suspected. |
| Ice is too thin/thick | Incorrect ice thickness setting, ambient temperature too high/low, water temperature. | Adjust ice thickness setting, ensure proper room temperature, use cold water. |
| Fuga d'aigua | Loose drain pipe, damaged water hose, clogged drain. | Check all connections, inspect hoses for damage, clear any blockages in the drain. |
| 'Ice Full' light stays on | Ice bin is full, sensor obstructed, sensor malfunction. | Remove ice, ensure sensor is clear, clean sensor area. |
| La màquina no s'encén | No power, faulty power cord/plug. | Check power outlet, inspect power cord, try a different outlet. |
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | LifePlus |
| Nom del model | KZB-45C |
| Dimensions del producte (P x A x A) | 15.69 x 14.17 x 24.8 polzades |
| Pes de l'article | 48.72 lliures |
| Producció diària de gel | Up to 110 LBS / 24 Hours |
| Capacitat d'emmagatzematge de gel | 16 lliures |
| Wattage | 300 watts |
| Ice Thickness Settings | 3 (Thin, Medium, Thick) |
| Water Inlet Modes | Tap Water, Self-Priming |
| Característiques especials | Self-Cleaning, Undercounter/Freestanding Design |
8. Garantia i Suport
For warranty information or technical support, please refer to the warranty card included with your product or contact LifePlus customer service. Keep your purchase receipt as proof of purchase.
