1. Introducció
The Honeywell Xenon 1902GSR is a high-performance wireless handheld barcode scanner designed for efficient and reliable data capture. This device utilizes advanced area-imaging technology to read both 1D and 2D barcodes, including those that are damaged, smudged, or displayed on digital screens. With Bluetooth connectivity, it offers cordless operation, enhancing mobility and reducing workspace clutter. This manual provides essential information for the proper setup, operation, and maintenance of your barcode reader.
2. Informació de seguretat
- No exposeu el dispositiu a temperatures extremes, humitat ni substàncies corrosives.
- Eviteu l'exposició directa dels ulls a la font de llum de l'escàner.
- Feu servir només accessoris i adaptadors de corrent aprovats pel fabricant.
- No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal de servei qualificat.
- Eliminar les bateries segons la normativa local.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- Honeywell Xenon 1902GSR Barcode Reader
- Communication/Charging Cradle (CCB01-010BT)
- Cable USB
- Guia d'inici ràpid (aquest manual)
Figure 1: Honeywell Xenon 1902GSR Barcode Reader (Handheld Unit)
Figure 2: Honeywell Xenon 1902GSR Barcode Reader with its Communication/Charging Cradle
4. Configuració i instal·lació
4.1 Càrrega de la bateria
- Connect the USB cable to the communication/charging cradle.
- Plug the other end of the USB cable into a powered USB port on your computer or a USB wall adapter.
- Place the barcode reader into the cradle. Ensure it is seated correctly.
- The scanner's indicator light will show charging status. Allow several hours for a full charge before first use.
4.2 Connecting the Cradle to a Host System
The cradle connects to your host system (e.g., computer, POS terminal) via the supplied USB cable.
- Ensure the host system is powered on.
- Connect the USB cable from the cradle to an available USB port on your host system.
- The system should automatically detect and install the necessary drivers. If not, refer to the Honeywell support weblloc per a la descàrrega de controladors.
4.3 Pairing the Scanner with the Cradle
The scanner and cradle are typically pre-paired at the factory. If re-pairing is necessary:
- Assegureu-vos que l'escàner estigui carregat i engegat.
- Scan the "Link" barcode found on the bottom of the communication/charging cradle.
- The scanner will emit a series of beeps to indicate successful pairing.
5. Instruccions de funcionament
5.1 Escaneig bàsic
- Subjecteu l'escàner amb la finestra d'escaneig mirant cap al codi de barres.
- Press and hold the trigger button. An aiming beam will appear.
- Centreu el feix d'orientació sobre el codi de barres.
- Once the barcode is successfully read, the scanner will emit a beep and the indicator light will flash green.
- Deixeu anar el disparador.
5.2 Reading 1D and 2D Barcodes
The Xenon 1902GSR is capable of reading a wide variety of 1D (e.g., UPC/EAN, Code 39) and 2D (e.g., QR Code, Data Matrix, PDF417) barcodes. For optimal performance, ensure the barcode is well-lit and the scanner is held at an appropriate distance.
5.3 Gamma Bluetooth
The scanner operates wirelessly up to 33 feet (10 meters) from its communication cradle. Performance may vary depending on environmental factors and obstacles.
6. Manteniment
6.1 Neteja del dispositiu
- Feu servir un drap suau i netampened with water or a mild cleaning solution to wipe the exterior of the scanner and cradle.
- No utilitzeu netejadors abrasius, dissolvents ni productes químics agressius.
- Keep the scan window clean and free of dust and smudges for optimal reading performance.
6.2 Cura de la bateria
- For best battery life, avoid fully discharging the battery frequently.
- Guardeu el dispositiu en un lloc fresc i sec quan no el feu servir durant períodes prolongats.
- If the battery performance significantly degrades, it may need replacement. Contact Honeywell support for authorized battery replacement options.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Scanner not powering on | Bateria baixa o esgotada | Place scanner in cradle to charge. Ensure cradle is powered. |
| L'escàner no llegeix codis de barres | Barcode damaged/poor quality; improper scanning technique; dirty scan window | Try scanning a different barcode. Adjust distance/angle. Clean scan window. |
| No data transmitted to host | Scanner not paired; USB cable disconnected; incorrect host interface settings | Re-pair scanner with cradle. Check USB cable connection. Verify host system settings. |
| Connexió intermitent | Fora de l'abast; interferències | Move scanner closer to cradle. Reduce sources of interference (e.g., other Bluetooth devices, Wi-Fi routers). |
8. Especificacions
| Característica | Detall |
|---|---|
| Model | 1902GSR |
| Connectivitat | Bluetooth Class 2, v2.1 EDR; USB (via cradle) |
| Patró d'escaneig | Area Image (838 x 640 pixel array) |
| Capacitat de descodificació | 1D, 2D, PDF417 |
| abast sense fils | Fins a 10 m de línia de visió |
| Bateria | Lithium-Ion, 1800 mAh (minimum) |
| Dimensions (Scanner) | 4 x 6 x 3 polzades (aproximadament) |
| Weight (Scanner) | 1 lliura (aproximadament) |
| Temperatura de funcionament | De 0 °C a 50 °C (32 °F a 122 °F) |
9. Garantia i Suport
Honeywell products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Honeywell website. For technical support, driver downloads, or service inquiries, please visit www.honeywell.com/us/en/support or contact your local Honeywell representative.
ASIN: B0G1PTY418
Data de primera disponibilitat: 10 de novembre de 2025
