Manual d'instruccions del llum penjant Eglo Drifter Model 89203

1. Introducció

This manual provides essential instructions for the safe installation, operation, and maintenance of your Eglo Drifter Pendant Light, Model 89203. This elegant indoor lighting fixture features a chrome steel structure with brilliant clear glass elements, designed to provide warm white illumination.

2. Informació de seguretat

• Instal·lació professional recomanada: Due to the electrical nature of this product, professional installation by a qualified electrician is strongly recommended to ensure safety and proper function.
• Desconnexió d'alimentació: Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
• Voltage Compatibilitat: Assegureu-vos el subministrament voltage coincideix amb els requisits de l'aparell (220-240V).
• Només per a ús interior: This fixture is rated IP20 and is designed exclusively for indoor use. Do not expose to moisture or outdoor elements.
• Tipus de bombeta: Use only G9 halogen bulbs as specified. Do not exceed the maximum wattage per bombeta.
• Manipulació del vidre: Manipuleu els components de vidre amb cura per evitar trencaments i lesions.

3. Contingut del paquet

Si us plau, comproveu que hi hagi tots els components abans de començar la instal·lació:

• Eglo Drifter Pendant Light Fixture
• 9 x G9 Halogen Bulbs
• Mounting Hardware (screws, anchors, wiring connectors)
• Manual d'instruccions (aquest document)

4. Configuració i instal·lació

Important: Ensure power is disconnected at the main circuit breaker before proceeding.

1. Desempaquetar components: Traieu amb cura totes les peces de l'embalatge i comproveu si hi ha algun dany.
2. Preparació de la ubicació de muntatge: Identify the desired ceiling location for the pendant light. Ensure the ceiling structure can support the weight of the fixture (approximately 1.2 kg).
3. Instal·leu el suport de muntatge: Secure the provided mounting bracket to the ceiling junction box using the appropriate screws and anchors from the mounting hardware kit.
4. Connecteu el dispositiu: Connect the fixture's electrical wires to the household wiring according to local electrical codes. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Use appropriate wiring connectors.
5. Col·loca el dosser: Carefully push the fixture's canopy up to the ceiling, covering the mounting bracket and wiring connections. Secure it in place using the provided fasteners.
6. Ajusta l'alçada: Adjust the suspension cables to achieve the desired hanging height for the pendant light. Ensure the cables are evenly tensioned.
7. Instal·leu les bombetes: Insert the 9 G9 halogen bulbs into their respective sockets. Handle bulbs with a clean cloth to avoid transferring oils from your skin, which can reduce bulb life.
8. Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor principal.

Image 1: The Eglo Drifter Pendant Light, showcasing its chrome ceiling plate, suspension wires, and the circular arrangement of clear brilliant glass elements. The electrical cord is visible, gently curving down from the ceiling plate to the light fixture.

5. Instruccions de funcionament

The Eglo Drifter Pendant Light is designed for direct wiring and does not include an integrated switch. Operation is controlled via the wall switch connected to the circuit where the light is installed.

• Activació/desactivació: Use the standard wall switch to turn the light fixture on or off.
• Substitució de bombetes: Refer to the 'Maintenance' section for instructions on safely replacing bulbs.

6. Manteniment

• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp cloth to wipe the chrome steel and glass surfaces. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Substitució de bombetes:
  1. Desconnecteu l'alimentació al disjuntor.
  2. Deixeu que les bombetes es refredin completament abans de tocar-les.
  3. Carefully remove the old G9 halogen bulb by pulling it straight out from its socket.
  4. Insert a new G9 halogen bulb (max 33W) by pushing it straight into the socket. Avoid touching the glass part of the new bulb with bare hands.
  5. Restaura el poder.

7. Solució De Problemes

If your pendant light is not functioning correctly, please check the following:

• El llum no s'encén:
  • Ensure the main circuit breaker is on.
  • Check that the wall switch is in the 'ON' position.
  • Verify that bulbs are correctly seated in their sockets.
  • Test with new bulbs, as individual bulbs may fail.
  • If the issue persists, consult a qualified electrician to check wiring connections.
• Llums intermitents:
  • Ensure bulbs are fully inserted.
  • Check for loose wiring connections (consult an electrician).
  • Ensure the correct type and wattage of bulbs are used.

8. Especificacions

9. Garantia i Suport

This Eglo Drifter Pendant Light is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Eglo customer support.

For technical assistance, replacement parts, or any other inquiries, please contact Eglo customer service through their official weblloc web o el venedor on es va comprar el producte.