Introducció
The Timex Expedition Ridge TW4B34400 is a robust digital quartz watch designed for adventure, combining a practical digital display with a durable and lightweight 43mm resin case. It features a flexible and soft silicone strap for all-day comfort. Key functionalities include a chronograph for precise time measurement, an alarm, a countdown timer, and the signature INDIGLO® backlight for visibility in low-light conditions.
Figura 1: Frontal view of the Timex Expedition Ridge TW4B34400 digital watch.
Configuració
Activació inicial
Your Timex Expedition Ridge watch comes with a pre-installed CR2016 cell battery. No initial battery installation is required. If present, remove any plastic battery tab from the watch crown or side buttons to activate the watch.
Configuració de l'hora i la data
The watch typically features multiple buttons for setting. While specific button functions may vary slightly, the general procedure involves:
- Entra al mode de configuració: Press and hold the 'SET' or 'ADJUST' button (often located on the left side) until digits begin to flash or a 'SET' indicator appears on the display.
- Select Item: Use the 'MODE' button (often located on the left side) to cycle through the settings (e.g., hours, minutes, year, month, day).
- Ajusta el valor: Use the 'START/STOP' or 'ADVANCE' button (often located on the right side) to increase or decrease the flashing value.
- Confirmeu la configuració: Once all desired settings are adjusted, press the 'SET' or 'ADJUST' button again to exit the setting mode.
Figura 2: lateral view of the watch, illustrating button placement for operation.
Funcions operatives
Cronògraf
The chronograph function allows you to measure elapsed time. To use:
- Press the 'MODE' button until the chronograph display appears.
- Press the 'START/STOP' button to begin timing.
- Press 'START/STOP' again to pause or stop the timing.
- Press the 'RESET' button (often the same as 'SET' or 'ADJUST' in chronograph mode) to clear the measured time.
Alarma
Set a daily alarm to alert you at a specific time:
- Navigate to the alarm mode using the 'MODE' button.
- Use the 'SET' or 'ADJUST' button to enter alarm setting mode.
- Adjust the alarm time using the 'START/STOP' button.
- Activate or deactivate the alarm using a dedicated button or by cycling through options in the alarm setting mode.
Temporitzador de compte enrere
The countdown timer allows you to set a specific duration:
- Access the timer mode via the 'MODE' button.
- Set the desired countdown time using the 'SET' and 'START/STOP' buttons.
- Press 'START/STOP' to begin the countdown. An alert will sound when the timer reaches zero.
Llum nocturna INDIGLO®
To illuminate the watch display in low-light conditions, press the INDIGLO® button (typically the top-left button). The backlight will remain active for a few seconds.
Manteniment
Neteja
Netegeu el rellotge regularment amb un drap suau i sec.amp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the case, strap, or crystal.
Resistència a l'aigua
This watch is water-resistant to 100 meters (330 feet). This rating makes it suitable for showering, swimming, and snorkeling. However, it is no designed for scuba diving. To maintain water resistance, ensure all buttons are not operated while the watch is submerged in water.
Figure 3: Watch back detailing water resistance and battery type.
Canvi de bateria
The watch uses a CR2016 cell battery. When the display dims, functions become erratic, or the watch stops working, the battery may need replacement. It is highly recommended to have battery replacement performed by a qualified watch technician. This ensures the correct battery type is used and the watch's water resistance is properly resealed.
Substitució de corretja
The Timex Expedition Ridge TW4B34400 features quick-release spring bars, allowing for easy strap changes without the need for specialized tools. Simply slide the small lever on the spring bar to compress it and remove the strap. To install a new strap, reverse the process.
Figura 4: posterior view of the watch, showing the silicone strap and quick-release mechanism.
Resolució de problemes
- Pantalla en blanc: If the display is blank, check if the battery tab has been removed. If the watch is not new, the battery may need replacement.
- Hora/data incorrecta: Re-enter the time and date setting mode as described in the 'Setup' section and adjust the values.
- Botons que no responen: Ensure the watch is not in a locked mode (if applicable). If buttons remain unresponsive, a battery reset might be necessary; consult a professional watch service.
- INDIGLO® no funciona: Check the battery level. A low battery can affect backlight functionality.
Especificacions
| Característica | Especificació |
|---|---|
| Marca | Timex |
| Número de model | TW4B34400 |
| Tipus de visualització | Digital |
| Moviment | Quars |
| Material de la caixa | Resina |
| Diàmetre de la caixa | 43 mm |
| Gruix de la caixa | 13 mm |
| Material de la corretja | Silicona |
| Amplada de la corretja | 22 mm |
| Resistència a l'aigua | 100 metres (330 peus) |
| Tipus de bateria | CR2016 Cell |
| Característiques especials | INDIGLO® Night-Light, Chronograph, Alarm, Timer, Day/Date Display |
Garantia i Suport
For detailed warranty information, product registration, and customer support, please visit the official Timex website or contact your local Timex service center. It is advisable to retain your proof of purchase for any warranty claims.
