Manual d'usuari de la cinta de córrer Sperax RM-01 amb funció de vibració

1. Introducció

The Sperax RM-01 Walking Treadmill Pad is a versatile fitness solution designed for home and office use. It integrates walking, under-desk running, and vibration modes to provide a comprehensive workout experience. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device.

Key features include a powerful yet quiet 400W servo motor, adjustable speeds from 0.2 to 3.8 mph, support for up to 350 pounds (recommended 265 pounds), and a low noise level below 45 dB. It features an LED display for real-time tracking of metrics and offers four invigorating vibration intensity levels. Its compact and portable design makes it easy to store and use in various settings.

This image illustrates the 3-in-1 functionality of the Sperax Walking Treadmill Pad, highlighting its walking, running (up to 3.8 MPH), and vibration modes.

2. Components del producte

Please ensure all components are present upon unboxing:

• Sperax RM-01 Walking Treadmill Pad
• Control remot (requereix 2 piles AAA, no incloses)
• Manual d'usuari
• Cable d'alimentació
• Clau anglesa en forma de L
• Lubricant

This image displays all the accessories included with the Sperax Walking Treadmill Pad, such as the remote control, user manual, power cord, L-shaped wrench, and lubricant.

3. Configuració

3.1 Col·locació

Place the treadmill on a hard, flat surface. Avoid using it on carpets or soft floors, as this can hinder proper heat dissipation from the motor and potentially reduce the lifespan of the device. Proper placement also helps prevent the risk of injury during exercise.

The image illustrates recommended placement on hard floors (wooden, tile, hard floor) and advises against use on carpeting or soft floors to prevent motor overheating and potential injury.

3.2 Connexió d'alimentació

Connect the power cord to the treadmill's power input and then to a suitable electrical outlet.

3.3 Piles del comandament a distància

Insert two AAA batteries into the remote control. Batteries are not included and must be purchased separately.

4. Instruccions de funcionament

4.1 Encès/Apagat

Locate the main power switch on the treadmill and turn it to the 'On' position. Then, use the power button on the remote control to start or stop the treadmill. The treadmill will initiate with a 3-second countdown before starting at a low speed.

4.2 Ajust de velocitat

Use the '+' and '-' buttons on the remote control to increase or decrease the walking speed. The speed can be adjusted from 0.2 mph to 3.8 mph in 0.1 mph increments. Holding down the button will adjust the speed more quickly.

4.3 pantalles LED

The integrated LED display provides real-time feedback on your workout. It cycles through various metrics:

• Hora: Durada del teu entrenament.
• Velocitat: Velocitat actual de la marxa.
• Passos: Nombre de passos fets.
• Distància: Distància total recorreguda.
• Calories: Calories cremades estimades.

This image details the LED display, indicating how it tracks time, speed, steps, and distance during your workout.

4.4 Modes de vibració

The treadmill features four distinct vibration intensity levels, accessible via the remote control. These modes are designed to enhance your workout and recovery:

• Light Vibration Mode: Ideal for meditation and body stretching.
• Strong Vibration Mode: Activates muscles throughout the body.
• Light Superposition Mode: Helps relax your hands and legs.
• Strong Superposition Mode: Designed to improve physique and enhance metabolism.

This image details the four adjustable vibration intensity levels: Light Vibration Mode for meditation/stretching, Strong Vibration Mode for waking muscles, Light Superposition Mode for relaxing hands and legs, and Strong Superposition Mode for enhanced metabolism.

4.5 App Connectivity (Sperax Fitness App)

The Sperax Fitness app can be downloaded and connected to your treadmill via Bluetooth 5.0. The app allows you to:

• Monitor real-time exercise data (calories burned, speed, time, distance).
• Customize and enhance your home workout routine.
• Access various training modes and courses.

The Sperax Fitness app connects via Bluetooth 5.0, allowing users to track calories burned, speed, time, and distance, and customize their workout routines.

4.6 Vídeos oficials de productes

5. Manteniment

5.1 Lubricació

Regular lubrication is essential for smooth operation and extending the lifespan of your treadmill. Use the provided lubricant as follows:

1. Apagueu i desconnecteu el dispositiu.
2. Tilt the device to the side and gently lift the edge of the running belt.
3. Apply the lubricant evenly between the belt and the base.
4. Flip to the other side and repeat the above process.
5. Plug in the device and run it at 1.2 mph for 1-2 minutes to ensure full absorption and even spreading of the lubricant.

Lubrication Frequency:

• Less than 3 hours/week: Every 6 months
• 3-5 hours/week: Every 3 months
• More than 5 hours/week: Every month

Regular lubrication is crucial for maintaining the treadmill's performance. Lift the edge of the running belt and apply the provided lubricant evenly. Run the treadmill at 1.2 mph for 1-2 minutes to distribute the oil.

5.2 Ajust del cinturó

If the running belt drifts or becomes loose, use the provided L-shaped wrench to adjust the hexagonal screws on the rear end cap. Do not touch the screws on the front end cap.

• Si la corretja es desplaça cap a l'esquerra: Turn the left screw clockwise by 1/4 turn.
• Si la corretja es desplaça cap a la dreta: Turn the right screw clockwise by 1/4 turn.
• If belt is loose: Turn both screws clockwise by 1/2 turn at a time.

After adjustment, run the device for 1-2 minutes at 2 mph to verify the effect and adjust again if needed. Over-tightening the running belt may damage the motor and cause abnormal operation.

This image provides a visual guide for adjusting the running belt, detailing how to correct left/right drift and looseness using the provided L-shaped wrench.

5.3 Neteja

Apply a mild cleaner to a soft cotton cloth. Do not spray directly on the running belt or use acidic cleaners. Clean the device's surface only. Do not clean under the running belt. For stain removal, stains usually accumulate at the tail end; simply wipe this area clean.

6. Solució De Problemes

If you encounter any issues with your Sperax RM-01 Walking Treadmill Pad, consider the following basic troubleshooting steps:

• Sense energia: Ensure the power cord is securely plugged into both the treadmill and the electrical outlet. Check the main power switch on the treadmill. Verify remote control batteries are correctly inserted and charged.
• Belt Not Moving: Confirm the treadmill is powered on and the remote control is functioning. Check for any obstructions under or around the running belt.
• Soroll inusual: Ensure the treadmill is on a flat, hard surface. Check if the running belt requires lubrication or adjustment (refer to Maintenance section).
• El control remot no respon: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the treadmill's sensor.

For persistent issues, please refer to the detailed troubleshooting section in the full user manual or contact customer support.

7. Especificacions

8. Garantia i Suport

8.1 Informació de la garantia

According to the product specifications, there is no explicit warranty description provided for this item. Please refer to your purchase documentation or contact the retailer for specific warranty details.

8.2 Atenció al client

For any questions, technical assistance, or support needs regarding your Sperax RM-01 Walking Treadmill Pad, please contact Sperax customer service through the official brand channels or the retailer where the product was purchased.