NEBO OMNI 2K Rechargeable Work Light Instruction Manual

Introducció

The NEBO OMNI 2K is a versatile, omnidirectional LED work light designed for various tasks. It features 2000 lumens, 6 light modes, rotating magnetic handles, and a built-in power bank. It is impact and water resistant, making it suitable for tough environments. This manual provides essential information for the safe and efficient operation of your OMNI 2K work light.

Què hi ha a la caixa

• NEBO OMNI 2K Work Light
• Cable de càrrega USB-C

Configuració

1. Càrrec inicial: Before first use, fully charge your OMNI 2K work light using the included USB-C charging cable. Connect the USB-C end to the light's charging port (located under the protective flap) and the USB-A end to a compatible power adapter (not included). The blue LED indicators will show the charging status and battery level.
2. Familiaritza't: Explore the rotating magnetic handles and adjustable COB panels to understand the various positioning options for optimal illumination.

Image: The NEBO OMNI 2K Work Light with its handles extended, demonstrating its versatile design.

Instruccions de funcionament

Engegada/Apagada i Selecció de Mode

The OMNI 2K features 6 light modes. Press the power button to cycle through the modes:

• Dual COB High: Press 1x from OFF.
• Dual COB Low: Press 2x from OFF.
• Single COB High: Press 3x from OFF.
• Single COB Low: Press 4x from OFF.
• Red COB: From OFF, press and hold the power button for 2 seconds.
• Red COB Flashing: From OFF, press and hold the power button for 2 seconds, then press the power button once more.

To turn off the light, press the power button after 8 seconds in any mode, or cycle through all modes until it turns off.

Instruccions d'atenuació

While the light is ON (in dual, primary, or secondary COB mode):

• Manteniu premut el botó "-" button to dim. The light will blink 1x when it reaches minimum brightness.
• Manteniu premut el botó "+" button to increase brightness. The light will blink 1x when it reaches maximum brightness.
• Allibera el "-" or "+" button at any time to set desired brightness. If the button is still pressed, the light will continue to adjust between minimum or maximum brightness.

Memory Power Setting

After adjusting a light mode, leaving that mode on for 8 seconds and pressing the power button will set that mode to memory. From the OFF position, pressing the power button will activate your saved memory power setting.

Funcionalitat del banc d'energia

The OMNI 2K features a built-in 4000mAh power bank. To use it, lift the protective flap on the back of the unit to reveal the USB-A output port. Connect your device's charging cable to this port to charge your mobile devices.

Image: The NEBO OMNI 2K Work Light being used as a power bank to charge a smartphone via its USB port.

Manteniment

• Neteja: Netegeu la llum amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Emmagatzematge: Guardeu la llum en un lloc fresc i sec, allunyat de la llum solar directa quan no l'utilitzeu.
• Cura de la bateria: For optimal battery life, recharge the unit regularly, even if not in frequent use. Avoid fully depleting the battery for extended periods.

Resolució de problemes

• La llum no s'encén: Ensure the battery is charged. If the battery is low, connect the USB-C charging cable and allow it to charge.
• Problemes de càrrega: Verify that the USB-C cable is securely connected to both the light and the power source. Try a different USB-C cable or power adapter.
• Dimming/Brightness Not Responding: Ensure the light is in a COB mode (dual, primary, or secondary). Press and hold the '+' or '-' buttons firmly.

Especificacions

Garantia i Suport

The NEBO OMNI 2K Work Light comes with a Lifetime Warranty, ensuring quality and durability. For product support, warranty claims, or further assistance, please visit the official NEBO weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.

Official NEBO Weblloc: www.nebotools.com