AtomStack F03-0329-0AA1 Swift
Especificacions
- Nom del producte: AtomStack Swift
- Número de model: F03-0329-0AA1
- Versió: B
- Entrada d'alimentació: DC 24V
- Ports: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
- Indicador d'estat: Solid blue when working
Instruccions d'ús del producte
Llista de peces:
- Muntatge de l'eix X
- Left Y-axis assembly (with motor)
- Right Y-axis assembly
- Adaptador de corrent
- Llave fija (Fixed wrench)
Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.
How to Install Swift:
- Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
- If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
Llista de peces
Getting to Know AtomStack Swift
How to install Swift
- Place the five assemblies as shown in the diagram.
Nota: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left. - Align and connect the five assemblies, then secure them using six M5×8 screws.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
(Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
- Install the laser module and tighten the thumb knob.
Nota:
If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
- Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.
Mètode d'enfocament:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.
Consell:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.
- If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
- Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
- Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.
ATOMSTACK Official Recommended Software
Mobile App Download Method：
Mètode de descàrrega de programari informàtic:
Enllaç de descàrrega d'AtomStack Studio: https://atomstack.com/pages/atomstack-studio-software
- Official Download Link
https://atomstack.com/pages/atomstack-studio-software - Escaneja per descarregar
Recursos de programari
LightBurn
Unofficial software. Requires a separate purchase
Mètode de descàrrega del programari Lightburn: Enllaç de descàrrega: https://lightburnsoftware.com/pages/download-trial
- Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
- Obriu el programari LightBurn i seleccioneu: Dispositius – Importa
-
Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
The machine will beep once to confirm the connection.
Nota: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800
Guia d'usuari
Contacta amb nosaltres
Scan the QR code for more information:
- Unboxing & First Use
- Use with the AtomStack APP
- Resolució de problemes
- Manteniment
Atenció al client:
- For the detailed warranty policy, please visit our official weblloc: www.atomstack.com
- Per obtenir suport tècnic i servei, envieu un correu electrònic a: support@atomstack.com
Fabricant:
Shenzhen AtomStack Technologies Co., Ltd.
Codi postal: 518172
Adreça:
Pis 17, edifici 3A, fase II, parc intel·ligent, núm. 76, avinguda Baohe, carrer Baolong, districte de Longgang, Shenzhen, Guangdong, Xina.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.
Preguntes freqüents
Què he de fer si trobo problemes durant la instal·lació?
If you face any difficulties during installation, refer to the video tutorial available on the official webo poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.
Documents/Recursos
 |
ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdfManual d'usuari F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift |