Prova de flaix AVILOO

Especificacions del producte
- Marca: Aviloo
- Model: Conjunt de prova de flaix
- Versió: 07/25
- Visualització: LED
- Llums indicadores: Blue (booting up), Yellow (test in progress), Red (test failed), Green (test completed)
- Requisit de distància: Maintain a distance of 20 cm during operation
Instruccions d'ús del producte
Flash Test Set Up
Make sure the vehicle is not charging before proceeding with the flash test setup.
Perform the Flash Test
During the flash test, observe the LED display on the Aviloo Box.
- Blau intermitent: Indicates that the box is booting up.
- Llum groga: Test is in progress.
- If red lights up: Flash test failed (refer to notes at bottom right).
- Verd intermitent: Transferència de dades.
- Llum verda: Prova completada.
End of the Flash Test
Després de completar la prova de flaix, feu aquestes accions:
- Consulteu a https://aviloo.link/database si el vehicle es pot provar.
- Repeat the flash test according to the instructions if needed.
- If issues persist, contact AVILOO Customer Management for assistance.
Tingueu en compte: Any changes or modifications not approved by Aviloo may void the user’s authority to operate the equipment. Ensure to maintain a distance of 20 cm during operation.
CONFIGURACIÓ DE LA PROVA DE FLASH
- Obriu la porta del conductor (deixeu-la oberta durant la prova).
- Models VW, Skoda, Cupra i Seat: desbloquegeu el capó abans de connectar la Caixa AVILOO (no cal obrir-la).
- Plug the AVILOO Box into the OBD-2 port (for Tesla models, see installation video).
- Please start the vehicle and briefly put it into drive mode (with the brake applied) to activate the systems required for the test. You can then return the vehicle to park mode. Fastening the seatbelt will keep all relevant systems active.
- CONSELL: The AVILOO WebAPP helps you locate the OBD-2 port in the vehicle.
AVILOO BOX LED-DISPLAY
Blau intermitent: indicates that the box is booting up.
VISUALITZACIÓ A L'AVILO WEB APP

REALITZEU LA PROVA DE FLASH
- Wait for the yellow flashing one LED indicating that the AVILOO Box is ready for the FLASH Test.
- Corri el cinturó de seguretat del conductor per mantenir actius els sistemes necessaris per a la prova.
- Espereu que el LED verd continu, que indica que la prova FLASH s'ha completat.
Llum groga: Prova en curs.
If red lights up: FLASH Test failed (see notes at bottom right).
FI DE LA PROVA DE FLASH
- Apagueu el vehicle.
- Desfeu el cinturó de seguretat.
- Desendolleu l'AVILOO Box.
- Tanqueu la porta del conductor i, si cal, el capó.
- The AVILOO BATTERY CERTIFICATE is sent via email to the address registered to the respective AVILOO Box.
- Tingueu en compte: Changes or modifications not expressly approved by Aviloo could void the user’s authority to operate the equip-ment.
- Aquest és un dispositiu mòbil i l'usuari ha d'assegurar-se de mantenir una distància de 20 cm durant el funcionament.
Verd intermitent: Transferència de dades.
Llum verda: Prova completada.
NOTES IMPORTANTS
- Per mantenir el programari actualitzat, deixeu la caixa connectada a la font d'alimentació quan no l'utilitzeu.
- Red LED means: FLASH Test failed.
MÉS INFORMACIÓ
Preneu les mesures següents:
- Consulteu a https://aviloo.link/database si el vehicle es pot provar.
- Repeat the FLASH Test according to the instruc-tions.
- Contact AVILOO Customer Management.

Preguntes freqüents
What should I do if the Aviloo Box LED displays a red light?
If the red light comes on during the flash test, it indicates a test failure. Refer to the notes at the bottom right for more information, and consider repeating the test following the instructions provided.
Documents/Recursos
![]() |
Prova de flaix AVILOO [pdfManual d'instruccions Prova de flaix, prova |

