AXIS CP11W Window Camera User Manual

AXIS CP11W Window Camera

Acabatview

The InstaVision AI Window Camera installs via a magnetic tile connection, then is configured in the InstaVision app for Bluetooth-based device discovery and Wi‑Fi connectivity so you can view l'alimentació de la càmera en directe.

Especificacions

Quick Setup & Use

1. Install the ceramic (porcelain) tile: tear off the surface paper, paste the tile at the appropriate window position, ensure it is firmly attached and flat, and make sure the side with the magnetic ring faces into the room.
2. Connect the camera: bring the camera’s magnetic-ring side close to the tile’s magnetic ring and complete connection via magnetic adsorption; ensure the camera is firmly installed and angled as required.
3. Install the InstaVision app on your iPhone/Android.
4. Open the app, register or log in, then go to Home Page > Add Camera and follow the preparation instructions to power on the camera properly.
5. Enable Bluetooth access when prompted (required for discovery via BLE). If the device is not found, long press the reset button for 5 seconds to restore factory settings and try again.
6. Connect to Wi‑Fi: select a nearby 2.4 GHz & 5 GHz Wi‑Fi network, enter the password, and wait for connection confirmation sound.
7. Open the main interface to view Viu View (live camera feed).

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Descripció de la interfície

1. Botó de reinici
2. Ranura per a targetes TF
3. Font d'alimentació
The working state of the device, long press
5 seconds to restore the factory settings,
the camera will have a voice prompt
emissió.
Micro TF card, storage video and playback
vídeo.
Entrada de potència

This manual is suitable for various types of cameras
(The appearance may be different due to different batches, The
details are subiect to the receipt-This manual is only for the
installation instructions of this series of equipment)

Instal·lació i col·locació

A1 Window Camera
1. Preparation: Make sure you have prepared this tile and the
supporting camera.
2. Porcelain tile installation: carefully tear off the centrifugal paper on
the surface of the porcelain tile, pay attention to avoid touching the
adhesive surface. Paste the porcelain tile in the appropriate position
of the window, make sure that it is firmly pasted and the surface is
flat. Make sure that the side of the tile with the magnetic ring is facing
towards the room when pasting.
3. Camera Connection: Take out the camera, put the side corresponding
to the magnetic ring close to the magnetic ring of the ceramic tile, and
complete the connection through magnetic adsorption. Ensure that the
camera is firmly installed and the position angle meets the requirements
d'ús.

Instal·lació d'aplicacions

1. Download and Install: Download and install the
InstaVision app by scanning the QRcode for the Appl
Store or Google play Store.

2. Account Registration: Open the app and register a new
account or log in to an existing account.
5. Add Camera: Navigate to the Home Page within the app.
Locate and select “Add Camera” then go through preparation
instructions to power on your camera properly,

access, which is required for device discovery. Do not skip this step.Ensn
Bluetooth access is enabled as instructed, allowing the app to discover
device via BCE,
to cn SLsto=th
* If you can’t find the device in the above steps, press and hold tt
reset button for 5 seconds, restore the camera to factory settin
i torna-ho a provar.
5. Connect to Wi-Fi: The app Will automatically scan for nearby
2.4 GHz & 5 GHz Wi-Fi routers.Choose your desired Wi-Fi
network from the list provided. Please double-check your
Camera’s capability in terms of 2.4 GHz & 5 GHZ.

A1 Camera use Instruction video

If you need further assistance, please contact our customer
support team. You can send an email or call customer service
through the “Contact Us” page within the app.
Thank you for choosing InstaVision App. We are committed to
providing the best user experience and security protection. If
you have any suggestions or feedback, please feel free to
contacta amb nosaltres.
Per obtenir ajuda addicional, poseu-vos en contacte amb el nostre equip d'atenció al client:

Nota: Aquest equip s'ha provat i s'ha comprovat que compleix els límits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
estan dissenyats per proporcionar una protecció raonable contra les interferències nocives
en una instal·lació residencial. Aquest equip genera, utilitza i pot emetre
energia de radiofreqüència i, si no s'instal·la i s'utilitza d'acord amb el
instruccions, pot causar interferències perjudicials a les comunicacions de ràdio.
Tot i això, no es garanteix que no es produeixin interferències en un determinat lloc
instal·lació. Si aquest equip causa interferències nocives a la ràdio o
television reception, which can be determined by turning the equipment Off
i endavant, es recomana a l'usuari que intenti corregir la interferència per un o
més de les mesures següents:
— Reorienta o reubica l'antena receptora.
— Augmentar la separació entre l'equip i el receptor.
— Connect the equipment into an outlet on o circuit different from that
al qual està connectat el receptor.
— Consulteu el distribuïdor o un tècnic de ràdio/TV amb experiència per obtenir ajuda.
Important: Change or modifications not expressly approved by the
fabricant responsable del compliment podria anul·lar l'autoritat de l'usuari
operar l'equip.
Aquest dispositiu compleix la part 15 de les normes de la FCC. L'operació és
subjecte a les dues condicions següents:
(1) Aquest dispositiu no pot causar interferències perjudicials i
(2) aquest dispositiu ha d'acceptar qualsevol interferència rebuda, incloses les interferències
que pot provocar un funcionament no desitjat.