America's most trusted brand for automotive batteries, battery chargers, portable power stations, and jump starters designed for reliability in extreme conditions.
Die Hard is an iconic American brand renowned for its high-performance automotive batteries and power solutions. Originally established by Sears in 1967 and now owned by Advance Auto Parts, DieHard has built a legacy on reliability and durability, marketing products designed to operate in the toughest weather conditions. While best known for vehicle batteries, the brand's extensive catalog includes intelligent battery chargers, jump starters, inverter generators, portable power stations, alkaline batteries, work boots, and flashlights.
Modern DieHard products feature advanced technologies such as microprocessor-controlled charging for AGM and Gel batteries, as well as circular economy manufacturing processes for lead-acid batteries. Whether for automotive maintenance, emergency backup power, or job site utility, DieHard aims to provide 'Life' to your devices and vehicles. Support and warranty services for the brand are primarily handled through the Advance Auto Parts and Carquest network.
Manuals més recents de manuals+ seleccionat per a aquesta marca.
Mireu vídeos de configuració, instal·lació i resolució de problemes d'aquesta marca.
Preguntes freqüents sobre manuals, registre i assistència per a aquesta marca.
On most DieHard microprocessor-controlled chargers, a rapidly flashing green light indicates the battery is actively charging. A slowly flashing green light typically means the charger is in maintenance or float mode, keeping the battery fully charged.
Yes, most modern DieHard automatic chargers are designed for 12V lead-acid batteries, including Standard, AGM, and Gel types. Always check the specific mode or switch settings on your device.
Since the acquisition by Advance Auto Parts, warranty claims for DieHard batteries and products are generally handled at Advance Auto Parts or Carquest locations. Legacy Sears products may have different support paths; verify your model's terms.
If the overload indicator is red but the engine is running, disconnect all electrical loads, reduce the total power draw, and then press the reset breaker button on the control panel to restore output.
Connecteu el clamps properly to the battery, select the 'Engine Start' setting, and wait for any required countdown. Crank the engine for no more than 3-5 seconds. If it fails to start, allow the charger/battery to cool before trying again.