EAE Technology provides advanced KNX building automation systems, room controllers, dimmer actuators, and gateway solutions for energy management.
EAE Technology specializes in developing innovative building automation and smart home solutions, primarily utilizing the worldwide KNX standard. Their product portfolio includes advanced IP gateways, room control units, switch actuators, universal dimmers, and sensors designed to enhance energy efficiency and operational control. Widely adopted in commercial buildings and modern homes, EAE's KNX-compatible devices ensure reliable, scalable, and seamless integration for intelligent lighting, HVAC, and automated blind control.
Whether you are configuring the KMG103 KNX-Modbus TCP Gateway or setting up a Rosa Switch, you will find comprehensive technical documentation, ETS programming guidelines, and wiring diagrams to facilitate smooth commissioning and maintenance. Download manufacturer catalogs, .knxprod files, and instruction manuals specifically crafted for professional installers and smart-home technicians.
Manuals més recents de manuals+ seleccionat per a aquesta marca.
Preguntes freqüents sobre manuals, registre i assistència per a aquesta marca.
EAE KNX devices must be programmed using the KMG Configurator Software or Engineering Tool Software (ETS5 or higher). The device product file (.knxprod) can be downloaded from the EAE Technology weblloc.
The default physical address for EAE KNX Rosa Switches is typically 15.15.255, which can be modified using ETS5.
Use only a dry cloth to clean the device. Do not use wet cloths, caustics, or solvents, as these can easily damage the hardware hardware and finish.
If the Overload LED turns red, the current output exceeds the power supply's limit (e.g., above 320mA or 640mA models). Check the connected KNX bus for short circuits or excessive power loads and rectify them.