Hydro provides advanced chemical dispensing and fluid management solutions, including the AccuMax and SinkMaster series, alongside consumer wellness products.
Empresa de sistemes hidràulics is a global leader in chemical injecting, proportioning, dispensing, and medicating equipment. Renowned for its precision engineering, the brand manufactures industry-standard systems such as the AccuMax, SinkMaster, i EvoClean series, which are essential for effective cleaning, sanitation, and laundry operations in commercial environments.
These systems utilize innovative water-powered technology to ensure accurate chemical dilution and application. In addition to industrial dispensing, the catalog under this brand may include consumer wellness items like the HydroSnooze cooling and heating pads, offering versatile solutions for both commercial facility management and personal comfort.
Manuals més recents de manuals+ seleccionat per a aquesta marca.
Mireu vídeos de configuració, instal·lació i resolució de problemes d'aquesta marca.
Preguntes freqüents sobre manuals, registre i assistència per a aquesta marca.
Common causes include a clogged foot valve, scale build-up in the metering tip or eductor, low water pressure (min 25 psi required), or an empty concentrate container. Check the inlet strainer and ensure the discharge tube is firmly in place.
In hard water areas, scale may form inside the eductor. Remove the eductor and soak it in a descaling (deliming) solution. Alternatively, operate the unit with the suction tube in descaling solution to draw it through the system, then flush with clear water.
Consult the tip chart in your specific user manual (e.g., AccuMax or SinkMaster). For thick products, perform a measurement of concentration test by operating the primed dispenser for one minute and calculating the ratio of mixed solution to concentrate drawn.
Most Hydro dispensing units require a minimum dynamic water pressure of 25 psi to operate correctly and a maximum of 85 psi. Higher pressures may require a regulator.