LiteBee specializes in educational STEAM drones and programmable multicopters for kids, fostering coding skills through modular aerial robotics.
LiteBee is a leading educational technology brand operated by Shenzhen Makerfire Technology Co., Ltd., focusing on STEAM (Science, Technology, Engineering, Arts, and Mathematics) education. The brand is dedicated to creating programmable drones that allow children and students to learn coding and engineering concepts through hands-on play. LiteBee's product lineup includes building-block style drones like the LiteBee Wing, which supports graphical programming and various expansion modules.
Designed for classrooms, summer camps, and home learning, LiteBee products bridge the gap between play and education. Their drones often feature magnetic interfaces for easy assembly and connect to the proprietary LiteBee Go software for block-based programming. By integrating Scratch-like coding environments with real-world flight mechanics, LiteBee empowers young learners to explore the fundamentals of AI, aerodynamics, and computer logic in an engaging way.
Manuals més recents de manuals+ seleccionat per a aquesta marca.
Preguntes freqüents sobre manuals, registre i assistència per a aquesta marca.
Check if the motor wire is well connected and ensure the propeller is not over-pressed or stuck to the motor. You can also check for resistance by turning the motor by hand. If the motor is damaged, it should be replaced.
First, check the motor installation and ensure the propellers are attached correctly. Verify that the battery is fully charged. Finally, perform a calibration on the drone before attempting to fly again.
If the LiteBee Go software does not recognize the transmitter, you may need to install the radio transmitter driver within the LiteBee Go software. Once installed, select the corresponding device port.
The recommended payload for the LiteBee Wing is under 10g. Exceeding this weight may affect flight stability and battery life.
To switch from Mode 2 to Mode 1, connect the radio transmitter to a computer via USB and use the LiteBee Go software to download the Mode 1 program configurations to the device.