cecotec Compact Super Automatic Coffee Machine Instruction Manual

cecotec Compact Super Automatic Coffee Machine

PARTS I COMPONENTS

1. Tapa del dipòsit d'aigua
2. Tapa de tremuja en gra de cafè
3. Pom d'ajust del molinet
4. Panell de control
5. Sortidor de cafè
6. Safata de goteig
7. Contenidor de posos de cafè
8. Escumador de llet
9. Unitat de cervesa
10. Tapa lateral
11. Botó d'encesa

NOTA:
Els gràfics d'aquest manual són representacions esquemàtiques i poden no coincidir exactament amb el producte.

ABANS D'ÚS

• This appliance comes in a packaging designed to protect it during transport. Take the appliance out of its box and remove all packaging materials. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec’s Official Technical Support Service immediately.

Contingut de la caixa

• Màquina de cafè superautomàtica
• Manual d'instruccions
• Do not remove the product’s serial number in order to keep proper traceability if technical assistance is required.

FUNCIONAMENT

Instal·lació

1. Unpack the machine and remove it and the steam wand.
2. Insert the steam wand into the machine’s steam outlet slot until you hear a “click”, indicating it is properly positioned. Fig. 2
3. Steam outlet slot
4. Remove the water tank and rinse it thoroughly. Fill with filtered water. Replace the water tank. Fig. 3
5. After adding coffee beans to the coffee hopper, plug the machine into the mains. Fig. 4
6. Press the power switch; the machine will perform a self-check and clean the circuits. Fig. 5
   • Note: Check that hot water is dispensed.
7. Touch the screen icons to operate.
   • Note: To switch off the coffee machine, press and hold the power switch for 3 seconds. Control panel Fig. 6.

Llums indicadors

	Símbol	Descripció
1		Door open. When illuminated, this icon indicates that the right door is open. Please check.
2		Missing brewing unit. When illuminated, this icon indicates that the brewing group is either not installed or not properly fitted.
3		Curta d'aiguatage. When illuminated, this icon indicates that the water tank is low. Check if there is enough water.
4		Grounds container. When illuminated, this icon indicates: 1)  the grounds container is either not installed or not properly fitted 2)   the grounds container is full and needs emptying The system automatically alerts when full after 8 coffees.
5		Coffee beans shortage. When illuminated, this icon indicates that the grinder is low on beans. Add coffee beans.

6		Double cup. When illuminated, this icon indicates that the double cup function is activated. Two cups will be prepared simultaneously. The second cup will stop if there is not enough coffee during brewing.
7		Descaling. When illuminated, this icon indicates that the coffee machine’s pipes need descaling.
8		Low milk or steam wand alert. When illuminated, this icon indicates that the milk jug or steam wand is either not installed or not properly fitted.
9		Water circuit warning. When this alarm appears on the display, it indicates that water is not flowing through the machine’s internal circuit. Confirm that there is water in the tank and that it is properly installed. Press the settings touch icon  to activate the water pump to purge air from the pipes and allow water flow.

Brewing Americano coffee

1. Adjust the coffee outlet height and place a cup. Fig. 7
2. Touch the Americano coffee touch icon per començar a fer cervesa.
3. Adjust coffee strength and quantity during preparation.
   • During grinding (“g” displayed on the right of the screen), press the “+” or “-” touch icon to adjust the amount of ground coffee.
   • During brewing (“ml” displayed on the right of the screen), press the “+” or “-” touch icon to adjust the coffee quantity.
   • Premeu el botó touch icon to prepare 2 cups of coffee.
   • PressV to end the operation.

Brewing Espresso coffee

1. Adjust the coffee outlet height and place a cup. Fig. 7 (p. 49)
2. 2. Touch the Espresso coffee touch icon  per començar a fer cervesa.
3. Adjust coffee strength and quantity during preparation.
   • During grinding (“g” displayed on the right of the screen), press the “+” or “-” touch icon to adjust the amount of ground coffee.
   • During brewing (“ml” displayed on the right of the screen), press the “+” or “-” touch icon to adjust the coffee quantity.
   • Press the touch icon  to prepare 2 cups of coffee.
   • Premeu per acabar l'operació.

Escumant llet

1. Adjust the milk frother steam wand to the desired position and insert it into the milk.
   • Note: Do not overfill the milk container to prevent overflow during frothing.
2. Touch the steam touch icon per començar.
3. If the milk foam reaches the desired consistency during the process, you may press settings touch icon 9 to stop milk frothing; if the frothing time is insufficient, during the steam process (see number on display), press the “+1′ touch icon to increase frothing time.
   • Note: Immerse the milk wand in water after frothing milk. Clean it using the milk frothing process. Then, wipe the wand with a clean cloth to prevent milk from sticking to the inner wall or blocking the steam outlet.

Preparació d’aigua calenta

1. Adjust the coffee outlet height and place a cup. Fig. 7
2. Touch the hot water touch icon to dispense hot water. The default hot water quantity is 250 ml, and you may stop it according to your needs.

Coffee grinder adjustment:
When you need to adjust the coffee grinding coarseness, turn the grinder knob (Fig. 8) while the grinder is operating, otherwise, the grinder may be damaged.

1. Bé
2. Gruixuda

Adjust the coffee grinding coarseness according to the roast level of your coffee beans (medium roast beans are recommended).

1. If coffee flow is too slow (grinding is too fine), turn the grinder knob towards a coarser setting.
2. If coffee flows too quickly and is watery (grinding is too coarse), turn the grinder knob towards a finer setting.
3. If the coffee grind is too coarse, turn the grinder knob anticlockwise; if the coffee grind is too fine, turn the grinder knob clockwise.

Nota:

• Do not overfill the coffee bean hopper. Excessive beans may become damp (especially in humid weather), which can affect the grinder and prevent proper grinding, resulting in coffee that cannot be brewed or is too weak.
• Avoid leaving beans in the hopper for extended periods, as this may affect coffee quality and grinder performance.
• To adjust the grinding level without the grinder running, press the central part of the grinder knob, Fig. 9, with a small screwdriver. While holding this central area, you can turn the knob without damaging the grinder.

Consells:

• The grinder knob is set to maximum when leaving the factory. It is suggested not to adjust it after the first 100-150 cups.
• Do not add too many coffee beans at once or leave them in the hopper for long periods to prevent loss of freshness or dampness. Moisture will prevent grinding, brewing and affect taste.
• Replace beans when damp to ensure good taste. Then turn the grinder knob to maximum and try grinding. If the machine works properly, restore the grinder knob to its original position.
• Turn the grinder knob to maximum when coffee beans do not grind properly, possibly due to moisture or oil build-up from the beans. Then try adding some uncooked rice or professional grinder cleaners to the coffee bean hopper and attempt grinding. If the machine works properly, restore the grinder knob to its original position. (Try repeatedly).

Handling removable parts
To ensure proper operation, it is important to know how to remove and insert the following parts: water tank, brewing unit, drip tray and milk frother steam wand.

Extracció
Figura 10

1. Water tank: Pull upwards to remove.
2. Side cover: Push upwards and remove the cover.
3. Brewing unit: Press and pull outwards.
4. Drip tray: Pull outwards.
5. Milk frother: Pull outwards.

Instal·lació

Figura 11

1. Water tank: Insert downwards.
2. Brewing unit: Push along the guide until you hear a “click”.
3. Drip tray: Push inwards.
4. Milk frother: Push along the guide until you hear a “click”.

Notes importants d'instal·lació

• Brewing unit: When installing the brewing unit, ensure it is firmly in place and you hear a “click”. If not properly installed, remove it and reinstall.
• Water tank: After replacing the water tank, check if it is flush with the top cover. If flush, it indicates correct positioning. If it sits higher, press down until flush with the top cover.
• Milk frother: When reinstalling the milk frother, ensure it is firmly in place with an audible  “click”. If not firmly seated, repeat the removal and reinstallation process.

Menus and beverage customisation

1. Espresso coffee parameter settings

TO access settings:

1. Ensure the coffee machine is on the main screen (standby mode).
2. Press and hold the settings touch icondurant 3 segons.
3. After accessing the settings menu, the Espresso and Americano  iCOns will start flashing.
4. Select the Espresso touch icon 
5. Següent:
   • The option to adjust the amount of ground coffee will appear. Use the + and – touch icons to increase or decrease it. (Fig. 12 (p. 51))
   • When finished, press the Configuration touch icon 9.
   • Next, the option to adjust the amount of coffee in milliliters will appear. Use the + and – touch icons to adjust it. (Fig. 13 (p. 51))Once the relevant settings have been made, press the Configuration touch icon again to confirm the settings.
6. To return to the main screen (standby mode), press the Settings touch + 6 times in a row.

Parameter settings related to American coffee
Per accedir a la configuració:

1. Ensure the coffee machine is on the main screen (standby mode).
2. Press and hold the settings touch icon  durant 3 segons.
3. After accessing the settings menu, the Espresso , and Americano  icons will start flashing.
4. Select the Americano touch icon 
5. Següent:
   • The option to adjust the amount of ground coffee will appear. Use the + and – touch icons to increase or decrease it. (Fig. 12)
   • When finished, press the Configuration touch icon.
   • Next, the option to adjust the amount of coffee in milliliters will appear. Use the + and – touch icons to adjust it. (Fig. 13)
   • When finished, press the Configuration touch icon .
   • Next, the option to adjust the amount of water for the Americano in milliliters will appear. Use the + and – touch icons to adjust it. (Fig. 14)
6. Once the relevant settings have been made, press the Configuration touch icon again per confirmar la configuració.
7. To return to the main screen (standby mode), press the Settings touch icon 6 vegades seguides.

Configuració de la temperatura

1. Ensure the coffee machine is on the main screen (standby mode). 09 for 3 seconds.
2. Press and hold the settings touch icon  durant 3 segons.
3. After accessing the settings menu, press the Settings touch icon again 
4. The extraction temperature will be shown on the display (Fig. 15). Use the ‘+’ or – touch icons to modify the temperature at which the coffee is prepared.

Configuració de l'hora d'apagada automàtica

1. Ensure the coffee machine is on the main screen (standby mode).
2. Press and hold the settings touch icon durant 3 segons.
3. After accessing the settings menu, press the Settings touch icon twice 
4.  The automatic shutoff time will be shown on the display (Fig. 16). Use the ‘+’ or – touch icons to select the desired time (0.5h, lh, 2h… up to 24h).

Configuració d'inicialització

• Ensure the coffee machine is on the main screen (standby mode).
• Press and hold the settings touch icon  9 0for 3 seconds.
• After accessing the settings menu, press the Settings touch icon three times  .
•  The initialization setting will be shown on the display (Fig. 17).
  • Note: This function is intended for technical or after-sales service personnel only.

Informació de fabricació

1. Ensure the coffee machine is on the main screen (standby mode).
2. Press and hold the settings touch icon  durant 3 segons.
3. After accessing the settings menu, press the Settings touch icon five times 
4. The display will show manufacturing information such as date and batch number (Fig. 18).

Descalcificació

• Pour the descaler into a container with clean water and wait until it is completely dissolved.
• Remove the water tank, pour the water softener dissolved in the water into the water tank, and then add clean water up to the maximum mark on the water tank;
• Press the descaling touch icon:
  • Ensure the coffee machine is on the main screen (standby mode).
  • Press and hold the settings touch icon durant 3 segons.
  • After accessing the settings menu, press the Settings touch icon four times
  • Press the descaling icon (Fig. 19).
• Press the ‘0K’ touch icon to start descaling;
• When all the water has been consumed and the low water alert appears, remove the water tank and add fresh water;
• Press the x2 0K” touch icon  again, the machine will start the rinse cycle;
• When the rinse cycle is completed, the machine shall return to the standby interface.

NETEJA I MANTENIMENT

1. Adjust the coffee outlet height and place a cup. Fig. 7
2. Touch the ‘OK’ touch icon for 3 seconds to start cleaning/rinsing.

Nota:
The quick rinse function can also preheat the ducts and the brewing group. If the machine has been idle for a long time, a quick rinse before making coffee will improve the taste of the coffee. Daily maintenance is important to ensure durability and excellent flavor. To do so, follow these steps:

ELIMINACIÓ DELS ELÈCTRICS I ELECTRÒNICS VELLS

• This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities. For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities. Compliance with the above guidelines will help protecting the environment

DRET D'AUTOR

• The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

DECLARACIÓ DE CONFORMITAT UE SIMPLIFICADA

• Cecotec Innovaciones hereby declares that this product complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This product has been designed, manufactured and tested in The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L. compliance with the required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following weblloc web: https://cecotec.es/es/information/ declaració-de-conformitat

RESOLUCIÓ DE PROBLEMES

Problema	Possible causa	Possible solució
The control panel displays the low water icon	1.  No water in the water tank. 2.   Water level sensor	1.  Fill the water tank and insert it correctly, pushing the bottom part all the way in. 2.   When the machine is in standby mode: a.      Remove the water tank b.      Turn the machine off from the On/Off button. c.       Turn on the machine from the power button. d.      When the coffee maker is in the main screen (standby mode) place the full water tank back into the machine.
	needs calibration.

The control panel displays . The Configuration touch icon   is pressed to activate the water pump and purge air from the pipes to allow water to pass through, but no water comes out of the outlet.	1.   The water tank is not properly assembled. 2.   Water cannot enter the pump. 3.   The inside of the tube is clogged.	1.   Insert the tank correctly, pushing the lower part all the way to the bottom. 2.   Open the rear panel and inject water into the pump (contact Cecotec Technical Service). 3.   Check the internal tubes (contact Cecotec’s Official Technical Assistance Service).
The coffee comes out watery or with little body.	1.   The grinding setting is too fine. 2.   Very dark or oily grains have been used; the blades get stuck and do not grind well. 3.   Wet and ground grains block the grinder.	1.   Turn the grinding selector to make it coarser. 2.   Increase the amount of ground coffee with the “+” touch icon. 3.   Remove the wet grains, clean the container and insert dry grains, uncooked rice or grinder cleaner. Follow the instructions for cleaning the grinder in the next point.
No surt cafè	The water tank is not properly assembled. The filter of the coffee group piston is clogged. The internal ducts are obstructed.	Insert the reservoir correctly, pushing the lower part firmly all the way in. Clean the filter or replace it. Perform a descaling cycle. If the problem persists, contact Cecotec’s Official Technical Support Service.
El molinet no funciona.	The grinder is blocked by foreign bodies.	Remove foreign objects from the grinder. Remember to disconnect the device beforehand. Follow the instructions for cleaning the grinder in the next point.