Guia de l'usuari del connector de configuració del proxy de CISCO

Configura un servidor intermediari

You can set up a proxy to connect the Connector to Cisco Spaces, if the infrastructure hosting the Connector is behind a proxy. Without this proxy configuration, the Connector is unable to communicate with Cisco Spaces.

To configure proxy on the Connector, you must do the following:

Procediment

Pas 1 In the Connector GUI left navigation pane, click Configure HTTP Proxy. Enter your proxy address in the dialog box that is displayed.
Figura 1: Configuració del proxy

Nota
Choose the endpoint based on your Cisco Spaces Account. For information on how to choose endpoints, see the Table 1.

Figura 2: Configuració de l'autenticació bàsica per al proxy (opcional)

To configure the proxy’s basic authentication credentials, click Configure Username and Password.
Pas 2 You can troubleshoot any issues in proxy configuration. Click Solucionar problemes and select the Cisco Spaces URL.
Figura 3: Resolució de problemes del servidor intermediari

Figura 4: SampResultats de la prova d'execució

Configura un proxy transparent

To configure a transparent proxy on the Connector, you must do the following:

1. Copy the proxy server certificate and the proxy server certification authority (CA) bundle to the Connector.
2. From the Connector CLI, validate the proxy certificate.
3. From the Connector CLI, import proxy certificates.
4. From the Connector GUI, configure the proxy URL.

Procediment

Pas 1 Copy the proxy certificate to the Connector using scp.
El següent és comampl'ordre.

scp proxy-ca-bundle.pem spacesadmin@[connector-ip]:/home/spacesadmin/
scp proxy-server-cert.pem spacesadmin@[connector-ip]:/home/spacesadmin/

Pas 2 Log in to the Connector CLI, and validate the copied proxy certificate using the connectorctl cert validate comandament.
El següent és comampla sortida de l'ordre:
[spacesadmin@connector ~]$ connectorctl cert validate -c /home/spacesadmin/proxy-ca-bundle.pem -s/home/spacesadmin/proxy-server-cert.pem
Executing command:cert
Command execution status:Success
————————–

/home/spacesadmin/proxy-ca-bundle.pem and /home/spacesadmin/proxy-server-cert.pem exists
/home/spacesadmin/proxy-server-cert.pem: OK
Validation of certificate is successful

Pas 3 Import the proxy certification authority (CA) certificates along with other certificates using the connectorctl cert updateca-bundle comandament.
El següent és comampla sortida de l'ordre:

[spacesadmin@connector ~]$ connectorctl cert updateca-bundle -c /home/spacesadmin/proxy-ca-bundle.pem-s /home/spacesadmin/proxy-server-cert.pem
Executing command:cert
Command execution status:Success
————————–
/home/spacesadmin/proxy-ca-bundle.pem and /home/spacesadmin/proxy-server-cert.pem exist
/home/spacesadmin/proxy-server-cert.pem: OK
CA trust bundle updated successfully
System reboot will happen in 10 seconds. Do not execute any other command.

For more information on this command, see connectorctl cert updateca-bundle.

Pas 4 In the Connector GUI left navigation pane, click Configure HTTP Proxy. Enter your proxy address in the dialog box that is displayed.
Figura 5: Configuració del proxy

Nota
Choose the endpoint based on your Cisco Spaces Account. For information on how to choose endpoints, see the Table 1.

Figura 6: Configuració de l'autenticació bàsica per al proxy (opcional)

To configure the proxy’s basic authentication credentials, click Configure Username and Password.

Pas 5 You can troubleshoot any issues in proxy configuration. Click Solucionar problemes and enter the Cisco Spaces URL.

Figura 7: Resolució de problemes del servidor intermediari

Figura 8: SampResultats de la prova d'execució

Documents/Recursos

Connector de configuració del proxy CISCO [pdfGuia de l'usuari Configuració del connector del servidor intermediari, Configuració del connector, Connector

Referències

• Manual d'usuari