CORSTON Using Smart Switches
Especificacions
- Separate circuit integration for grouping circuits
- Automations for preset conditions
- Dual control with a toggle switch and a smart hub
- No calen aplicacions de tercers
- Capacitats de gestió remota
- Compatible with most smart hubs using Thread communication
F E AT U R ES
Integració de circuits separats
- Using our smart module, you can group circuits that aren’t wired together. This means separate systems in the house can be used simultaneously, along with the module’s “scene-setting function”, to create pre-set lighting arrangements.
Automatismes
Automations enable you to preset specific conditions that trigger your lights, such as “turn off all the lights when I leave the house” or “at sunset, turn on all outside lights”.
Control doble
When automation doesn’t suit, you can still control the lights with both a toggle switch and your smart hub (through voice activation and your smartphone).
No third-party apps
- Thanks to the integration of Matter in our modules, all devices are contained within your smartphone’s control centre. Therefore, you don’t need to install any extra apps to use our modules in your system.
Gestió remota
L'emparellament amb el vostre hub intel·ligent significa que tot es pot controlar de forma remota, fins i tot des de fora de casa. Això ajuda a estalviar energia si els llums es deixen encesos accidentalment, per exemple.ample.
Compatible amb la majoria de concentradors intel·ligents
Our smart modules communicate over Thread, meaning they don’t use WiFi. Therefore, to operate, they require a Thread Border Router. There are many smart hubs available that have Thread Border Router support built in. See the opposite list of the compatible devices.
DISPOSITIUS COMPATIBLES
Amazon Alexa controllers
- Echo (4a generació)
- Echo Show 8 (3a generació)
- Echo Hub
- Echo Studio
- Echo Studio (2nd Gen)
- Echo Plus (2nd Gen)
- Echo Show 10 (3a generació)
- Eero Beacon
- Eero Pro
- Eero 6
- Eero 6+
- Eero Pro 6
- Eero Pro 6E
- Eero PoE 6
- Eero PoE Gateway
- Eero Max 7
Apple Home controllers
- Apple TV 4K (2a generació)
- Apple TV 4K Wi-Fi+Ethernet (3rd generation)
- HomePod (2nd generation)
- HomePod mini
Google Home controllers
- Nest Hub (2nd generation)
- Nest Hub Max
- Nest Wifi Pro
- Wifi nid
SmartThings controllers
- SmartThings Hub (v3)
- Estació SmartThings
- Aeotec Smart Home Hub
Other Thread Border Routers
- Nanoleaf Lines
- Formes de Nanoleaf
- Elements Nanoleaf
- Aqara Hub M3
- Tado Bridge X
- Tado Heat Pump Optimizer
- GL iNet GL-S200
- nami mesh sensor
- Harman Kardon Virtuo
Ús d'interruptors intel·ligents
SETTING UP A SMARTHUB
You may already have one of these in your home, so check the list on the previous page to check it’s compatible. This will be the “brain” of your smart system, so it needs to be in place before using our module. The basic principle of setting up should be the same for most smart hubs, so if you don’t have one in your home, setup will look something like this.
INSTALLING YOUR MODULE
- Get a qualified electrician to wire in your module. Check that the power is off at the consumer circuit before installation.
- You only need one module per circuit. See the relevant instructions for your module (available on our weblloc web) per a més informació.
AUTOMATIONS & SCENES
- Use your smart hub app to create combinations of variables and lighting arrangements. These might have other names depending on your preferred smart hub, for example, “routines”, “groups”, or “timings”. Follow the prompts on your device to explore these options. If you are unsure how to do this, get in touch with us.
DOBLE CONTROL
Our modules can be paired with ourretractablee switches so your lights can be controlled from the wall. See our switches guide, available on our weblloc web per obtenir més informació sobre com instal·lar i mantenir els nostres interruptors.
Smart home QR codes
REFERENCE SHEET
Use this to keep track of the smart devices in your house by placing the QR code sticker provided in the areas below. The QR code on each sticker matches the one shown on the product it came with. Retain this sheet for future reference so the capabilities of the QR code are always easily accessible.
PROJECT/HOUSE NAME:
Full de referència de codis QR per a llars intel·ligents
- hola@corston.eu
- +44 (0)1249 549332
PMF
Do I need multiple modules for different areas of my house?
No, one module per circuit is sufficient. You can group circuits using our smart module for versatile control.
: Can I control the lights remotely?
: Yes, once paired with your smart hub, you can manage the lights remotely even when you are outside your house.
Is WiFi required for operating the smart modules?
: No, our modules communicate over Thread and do not require WiFi. Ensure your smart hub has Thread Border Router support for operation.
Documents/Recursos
 |
CORSTON Using Smart Switches [pdfInstruccions Using Smart Switches, Smart Switches, Switches |