deli T313 Split Comb Binding Machine Instruction Manual

Product Structure & Components

1. Mànec
2. Comb plate
3. Pull ring plate
4. Pull selector
5. 5Locating block
6. Pull ring handle
7. Punching margin control
8. Caixa de deixalles de paper

Consumable Specification Recommendations

Instruccions d'ús

1. La màquina s'utilitza per perforar paper i fulls de plàstic, i el clip de plàstic s'utilitza per a l'enquadernació de fulles soltes. La màquina només es pot utilitzar per a aquest propòsit, i si us plau, utilitzeu-la segons les instruccions de funcionament.
2. Abans de perforar els materials originals, recordeu utilitzar paper de rebuig per comprovar si la màquina funciona amb normalitat.
3. Buidar el contenidor de residus periòdicament.
4. El nombre límit superior per perforar és 20, i aquest nombre no s'ha de superar.

Punching Steps

1. Set the locating block at the desired position. Turn the knob counterclockwise to loosen. Turn it clockwise to fasten.
2. Turn the punching margin control to set the edge margin.
3. Pull out and disengage the proper punch selector when punching odd-sized documents.
4. Push paper into the punching channel. Pull the handle all the way down until it stops to punch completely through. Pull the handle up completely and remove the punched paper.

Passos d'enllaç

1. Place the rubber ring behind the comb-shaped plate and move the rubber ring to the left with the opening facing upwards.
2. Rotate the pull ring handle clockwise to open the rubber ring and then put the punched file onto the rubber ring.
3. Rotate the pull ring handle counterclockwise to remove the file.

Troubleshooting and Common Fault Analysis

Paràmetres del producte

• Gruix màxim de perforació: 20 sheets of paper (80g A4 paper)
• Binding edge distance: 2-5 mm
• Hole Size and Pitch: 3mm × 8mm, 14.3mm pitch
• Especificació d'enllaç: A4 size paper or smaller
• Gruix màxim d'enquadernació: 450 fulls
• Pes net: 6.35 kg
• Dimensions del dispositiu: 405 mm × 315 mm × 380 mm

Targeta de garantia

Gràcies per la compraasing our products. The interests of customers who purchase our products will be protected. For any malfunction due to product manufacturer quality issues, please contact authorized local dealers or service centers with this receipt and the warranty card.

Termes de garantia:

1. For product failures occurring under normal operating circumstances, free of charge repair and spare parts replacement services shall be provided by our company within one year commencing from the date of purchase.
2. Customers are required to present this warranty card and the original purchase invoice to our company upon requesting warranty service. This warranty card shall be valid only after the following form is filled out in detail and affixed with the official seal of the dealer.
3. No es prestarà cap servei de reparació gratuït en cas que es doni alguna de les circumstàncies següents:
   1. Venciment del període de garantia;
   2. Danys causats per un ús, manteniment o emmagatzematge inadequats que no compleixin els requisits del manual d'usuari;
   3. Falla o dany derivat d'un desmuntatge, reparació o modificació no autoritzat;
   4. Falla o dany causat per força major;
   5. Wear parts or consumable accessories.

This warranty card is delivered with the product (one card per product). Please keep this warranty card in a secure place to claim free warranty service. It will not be replaced if lost.

Warranty Registration RecordsDate of Purchase: ______ Year ______ Month ______ Day

(Dealer Copy: This copy shall be cut along the dotted line and retained by the dealer.)