dji Osmo Action Camera User Manual

dji Osmo Action Camera

Especificacions

Quick Setup & Use

1. Open the battery compartment cover, insert the Osmo Action battery with contacts facing the camera, then close and lock the cover.
2. Insert a microSD card (not included) into the microSD card slot.
3. Charge the camera using the included USB-C cable with a 5V/2A charger (not included). Charge time is ~90 minutes; LED lights red while charging and turns green when fully charged.
4. Turn on the camera. To activate it, connect your phone to the camera Wi‑Fi hotspot (SSID: Osmo Action_XXXX) and open the DJI Mimo app, then follow the on-screen instructions.
5. Use the buttons: press the shutter once for a photo; press and hold the shutter to start/stop recording. Use the power button to switch screens and cycle shooting modes.

Llegiu abans del primer ús

• Before using, watch all tutorial videos on the official DJI weblloc (https://www.dji.com/osmo-action) and read the user manual, disclaimer, and safety guidelines.
• Download the DJI Mimo App from the App Store or Google Play to activate and control the camera.

Contingut del paquet

• DJI Osmo Action Camera × 1
• Osmo Action Battery × 1
• Cable USB-C × 1
• Curved Adhesive Mount × 1
• Flat Adhesive Mount × 1
• Quick-Release Base × 2
• Vertical Adapter × 1
• Lens Protector × 1
• Manual d'usuari × 1

Acabatview

• Pantalla frontal: Mostra en directe view, settings, and battery status.
• Rear Touchscreen: 2.25-inch touchscreen for easy control and playback.
• Botó de l'obturador/enregistrament: Press once to take photos, press and hold to start/stop recording.
• Botó d'encesa: Press once to turn on/off, press and hold for 3 seconds to force restart.
• Port USB-C: Per carregar i connectar a un ordinador.
• Ranura per a targeta MicroSD: Supports up to 256GB (Class 10 or UHS-I required).
• Lent: 145° FOV, f/2.8 aperture, with a built-in lens protector.

Primers passos

Installing the Battery and MicroSD Card

1. Obriu la tapa del compartiment de la bateria.
2. Insert the battery with the contacts facing the camera.
3. Insert a microSD card (not included) into the slot.
4. Close the cover and ensure it is locked.

Carregant la càmera

• Use the included USB-C cable and a 5V/2A charger (not included).
• Charging time: ~90 minutes (0-100%).
• The status LED will light red while charging and turn green when fully charged.

Activació de l'acció Osmo

1. Enceneu la càmera.
2. Connect your phone to the camera’s Wi-Fi hotspot (SSID: Osmo Action_XXXX).
3. Open the DJI Mimo App and follow the on-screen instructions to activate the camera.

Funcionament

Característiques del botó

• Press Power Button once: Encendre/apagar la càmera.
• Press Shutter Button once: Fes una foto.
• Press and hold Shutter Button: Iniciar/aturar la gravació de vídeo.
• Press Power Button twice: Switch between front and rear screens.
• Press Power Button three times: Cycle through shooting modes.

Modes de tir

• Vídeo: Supports up to 4K/60fps, 2.7K/60fps, 1080p/120fps.
• Foto: 12MP still photos.
• càmera lenta: 1080p/240fps slow-motion video.
• timelapse: Time-lapse, hyperlapse, and motion-lapse modes.
• Esclat: 3/5/10 photos per burst.

Funcions de l'aplicació DJI Mimo

• Viu view i control remot.
• Camera settings adjustment (ISO, white balance, exposure, etc.).
• Media management and playback.
• Actualitzacions de firmware.
• Editing and sharing directly to social media.

Manteniment

• Clean the lens with a microfiber cloth to avoid scratches.
• Keep the camera and accessories dry and away from extreme temperatures.
• Do not expose the camera to strong magnetic fields.
• If the camera gets wet, dry it with a soft cloth and let it air dry completely before using.

Pautes de seguretat

• Do not use the camera while driving or operating machinery.
• Do not aim the camera directly at the sun or strong light sources to avoid damaging the sensor.
• Keep the camera and accessories out of reach of children and pets.
• Feu servir només bateries i carregadors aprovats per DJI.

Resolució de problemes

• Camera won’t power normally: Press and hold the Power Button for 3 seconds to force restart.
• Lens is dirty or scratched: Clean the lens with a microfiber cloth to avoid scratches.
• Camera got wet: Dry it with a soft cloth and let it air dry completely before using.
• Issues related to storage: Ensure the microSD card is inserted and meets requirements (up to 256GB; Class 10 or UHS‑I required).