INSTRUCCIÓ D'ÚS
Programador d'adreces de terminal
PRG.PAS.MCS |
170 x 112 x 35 mm/ 270 g |
Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
Font d'alimentació: 9V (bateria/bateria recarregable) |
Connexió al terminal mitjançant cable de connexió UTP de 0.25 cm |
Adreces disponibles per a la programació: entre “000” i “998” En escriure “999” finalitza la programació d'adreces. |
DESCRIPCIÓ
El PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Línia clàssica range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
CONNEXIÓ A LA TERMINAL
- Cable de connexió UTP de 0.25 cm
- Enrere
- Davant
- Programador PRG.PAS.MCS
- Vídeo del terminal: àudio (MCS.47X, PAS.27X, PAS.37X)
ON/OFF
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
PROGRAMACIÓ
Pas 1: Connect the programmer to the terminal.
Pas 2: Premeu el botó ON key on the programmer → The display shows [Adreça de la publicació].
Pas 3: On the terminal, press and hold the clau.
Pas 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
FET a la UE per:
ELECTRA srl
Parc Industrial Miroslava
Str. Principala 33, 707307, Jud. Iași – RO
+40 232 214.370
sales@electra.ro
www.electra.ro
SUPORT
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT
+43 1 810 20 99
sales@electra-automation.at
www.electra-automation.at
Documents/Recursos
![]() |
Programador d'adreces de terminal Electra PAS.17A [pdfManual d'instruccions PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Programador d'adreces de terminal, PAS.17A, Programador d'adreces de terminal, Programador d'adreces, Programador |