Eliot Lio Plus Smart Controller

Especificacions del producte:

• Nom del producte: Eliot Original Smartcontroller
• Components: 3-fach Memory-Bedienteil (memory handset), 1 Bedienteil (Handset), Schrauben (Screws 5*16 x2), Werkzeuge (Tools)
• Garantia: 2 anys
• Ús previst: Dry office areas

Instruccions d'ús del producte

Funcions bàsiques:

• Drehung im Uhrzeigersinn – AUF (Rotació en sentit horari – UP)
• Drehung gegen Uhrzeigersinn – AB (Anti-clockwise rotation – DOWN)

Saving Height Position:

1. Primer moveu l'escriptori a l'alçada desitjada que es vol salvar.
2. Premeu M per entrar a la interfície de memòria.
3. Seleccioneu un dels botons 1, 2 o 3 per desar l'alçada.

Selecting Saved Height Position:
Press memory button 1, 2, or 3 and the desk will move to the desired position. Keep the button pressed until the position has been reached. The display shows the current table height during the procedure.

Recordatori sedentari:

1. Press the M button for up to 5 seconds until the display shows the graphic above.
2. Toqueu de nou el botó M per accedir a la interfície de configuració.
3. Select a time interval or the turn off option using the 1 and 3 buttons.
4. Premeu el botó M per confirmar.

Bloqueig de seguretat:
Select the locking interface graphic above from the menu and press M to enter. Use the 1 or 3 buttons to select locking or unlocking. Press M again to confirm.

Navegació del menú:
To navigate through the menu, use buttons 1 and 3 to scroll left or right. Press M to select the desired function.

Parts

1. Telèfon

Cargols

Eines

 

Manual de muntatge

PAS 1
Using one of the two screws supplied with the frame, attach the handset to one of the predrilled holes on the underside of the desktop. Then insert the second screw directly into the desktop, applying some pressure to make a new hole. Please note that you can install the handset to the left or right side of the desktop

Pas 2
Connect handset to control box using the supplied cable, and securing the excess cable.

Garantia i responsabilitat

Garantia: 2 anys
This smartcontroller is designed for use in dry office areas only.
Qualsevol altre ús és per compte i risc de l'usuari.
En cap cas el fabricant accepta reclamacions de garantia o reclamacions de responsabilitat per danys causats per un ús o manipulació inadequats del controlador.

Atenció!
Si no es segueixen aquestes instruccions, es poden produir accidents que puguin causar lesions personals greus.

Precaució / Instruccions de seguretat

1. Make sure to have followed all caution/safety instructions from the Eliot height adjustable desk original user & assembly instructions.
2. When using the smartcontroller, the user must pay full attention and make absolutely sure that no person can be injured, or object damaged, in the process.
3. If the product is visibly damaged, it may not be installed or used.
4. Mantingueu tots els components elèctrics allunyats de líquids.
5. Do not open any of the electrical components. There is a danger of electrical shock.
6. Any changes made to the standard configuration of the handset will invalidate all liability or warranty claims.

Tota persona responsable d'aquest escriptori, durant la instal·lació o l'ús, l'ús diari o els treballs de manteniment i reparació, ha de tenir accés a aquestes instruccions i llegir-les atentament. Mantingueu aquestes instruccions a prop del vostre escriptori regulable en alçada.

Interfície

 

Funcions bàsiques

Operació d'elevació

• UP
  Clockwise rotation – desk moves up
• ABAIX
  Anti-clockwise rotation – desk moves down

Funció de memòria

Saving height position

1. Primer moveu l'escriptori a l'alçada desitjada que es vol salvar.
2. Press “M” to enter the memory interface.
3. Select one of the buttons “1”, ”2”, or “3” to save the height.

Selecting saved height position
Press memory button “1”, “2” or “3” and the desk will move to the desired position.
Keep the button pressed until the position has been reached.
The display shows the current table height during the procedure.

Menú de funcions avançades

Entra al menú
Premeu el botó "M" durant un màxim de 5 segons fins que la pantalla mostri la imatge següent.

Menú

• 1/5 Sedentary reminder function
• 2/5 Locking interface
• 3/5 Setting the upper & lower limit position
• 4/5 Vibration mode selection
• 5/5 Exit

Si us plau, tingueu en compte
Use the “1” and the “3” buttons to scroll left or right through the menu.
Then press ”M” to select the desired function.

Recordatori sedentari

1. Press the “M” button for up to 5 seconds until the display shows the graphic above.
2. Touch the “M” button again to enter the settings interface.
3. There are 3 different time intervals to choose from, or the turn off option. Select preference by navigating with the “1” and “3” buttons.
4. Premeu el botó "M" per confirmar.

After setting successfully the display will confirm showing a “√”.
Then the display will show the set height and a progress bar for the timer.
When the set time is over, the desk will vibrate for 10 seconds.
The timer will reset when the desk has moved above 100 cm (39.5inch).

Bloqueig de seguretat
Select the locking interface graphic above from the menu and press “M” to enter.
Use the “1” or “3” buttons to select locking or unlocking. Press “M” again to confirm.

After successful locking, the display will show “√”, and will display the lock icon as seen here below.

• a) Entering lock mode, controller can still be used.
• b) Appears after 5 seconds, controller is now locked.

Temporary unlock
Press the button sequence “1”, “2”, and “3” to unlock the controller temporarily. You can now make changes to the height or in the menu.
After 5 seconds the display (b) will appear and the controller will return to lock mode

Si configureu un recordatori i un bloqueig alhora, les dues icones es mostraran a la pantalla, tal com es veu aquí.

Setting the upper & lower limit position

1. Move the desk to the desired maximum or minimum height position.2. Press the “M” button for up to 5 seconds to enter the menu.
2. Select the setting upper & lower limit position interface graphic shown above from the menu and press “M” to enter.
3. Use the “1” or “3” buttons to select upper limit or lower limit position or to cancel the upper/lower limits.

Premeu el botó "M" per confirmar.

Quan l'escriptori es mou a la posició d'alçada mínima o màxima, la interfície mostrarà un recordatori com es mostra a continuació:

Selecció del mode de vibració

1. Press the “M” button for up to 5 seconds to enter the menu.
2. Select the vibration mode selection graphic shown above from the menu and press “M” to enter.
3. Use the “1” or “3” buttons to select the preferred vibration option or to switch off the vibration.
4. Premeu el botó "M" per confirmar.

Sortida
Per sortir del menú, seleccioneu el gràfic de sortida del menú que es mostra a sobre i premeu «M» per confirmar.

Error code and reset status menu

When the display shows an error code, it most likely needs to be reset. Please follow this procedure:

1. Rotate the wheel anti-clockwise until the desk has reached it’s lowest position.
2. Then release the wheel shortly.
3. Then rotate the wheel anti-clockwise again for up to 5 seconds until the display changes to “RESET”.
4. Release the wheel.
5. Once again, rotate the wheel anti-clockwise until the desk lowers a little more and slightly rises. The display should now display the actual height.
6. The desk has been reset and is now ready for use again .

If the reset does not resolve the problem and there is still an error code, please contact:
support@smartfurniture.de

www.eliotfurniture.com | support@smartfurniture.de

Preguntes freqüents

Can the smartcontroller be used in wet environments?

No, this smartcontroller is designed for use in dry office areas only.

Quant dura la garantia d'aquest producte?

El període de garantia és de 2 anys.

Documents/Recursos

Eliot Lio Plus Smart Controller [pdfManual d'instruccions Comandament intel·ligent Lio Plus, Lio Plus, Comandament intel·ligent, Comandament

Referències

• Manual d'usuari