Excellux Mini smart Switch
Especificacions
| Protocol sense fils | Zigbee3.0 |
| Entrada | AC 100 ~ 240V 50 /60Hz |
| Sortida | AC 100~ 240V 50 /60Hz |
| Potència de càrrega | <2200W AC 220V/10A |
| Temperatura de treball | -10 ~ 55 ℃ |
| Humitat de treball | 0 ~ 99% HR |
| Mida del producte | 39 * 31 * 18.5 mm |
| Material | ABS |
Descripció del producte
- The Zigbee Smart Switch is a versatile device that allows you to control your appliances remotely using a Zigbee network. It features a button for manual control, an indicator LED for status feedback, and supports the Zigbee route function for signal repeating.
Mètode d'instal·lació:
- Please wire the device according to the markings on the cover. The device operates by controlling the live wire power to turn connected appliances on or off. Ensure proper connection to L and N terminals.
Principi de funcionament:
- Long-press the button for 3 seconds to reset the device. Connect S1 and S2 to the ends of the wall switch, avoiding strong power sources like zero-fire lines. Always turn off AC power before wiring.
Configuració de la xarxa:
- Long-press the device button for 3 seconds to enter network discovery mode (rapid LED flashing).
- In the app, select Gateway and search for the device following the Zigbee Gateway/APP manual instructions.
- Note: Zigbee devices require a connection to a Zigbee gateway for data upload to the server/app.
Instruccions d'ús del producte
- Ensure proper wiring as per markings.
- Use the button for manual control or reset by long-pressing for 3 seconds.
- Connect S1 and S2 to the wall switch ends only.
- Turn off AC power before wiring.
- Follow the network configuration steps for connecting to the Zigbee gateway.
Please read the manual carefully and use the product correctly Thank you for purchasing and using this product. Before using the product, please read the manual carefully and use the product correctly. * The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.
Descripció del producte
Mètode d'instal·lació
Please wire the device according to the marking on the cover.ON/OFF operating principle:
- Els aparells connectats funcionen/s'aturen mitjançant l'encesa/desactivació del cable en directe.
- The device must be powered by L and N.
Warning: S1 and S2 can only be connected to the two ends of the wall switch. S1 and S2 cannot be connected to a strong power such as a zero-fire line! When wiring, please turn off the AC power supply!
Configuració de xarxa
- Long-press the device’s “Button” for 3 seconds, and the indicator led flashes rapidly, indicating that the device has entered the network discovery mode.
- Select Gateway on APP -> Search Device (refer to Zigbee Gateway /APP manual)
Consells:
- Zigbee device must connect to the Zigbee gateway to upload data to the SERVER/APP.
- This product supports the Zigbee route (signal repeater) function.
Preguntes freqüents
Q: How do I reset the Zigbee Smart Switch?
A: Long press the button for 3 seconds to initiate a reset.
Q: What is the load power supported by the switch?
A: The switch supports load power via Zigbee communication.
Documents/Recursos
 |
Excellux Mini smart Switch [pdfManual d'usuari Se92aedc203524327997e8eaa232b204aa, S67ef5405709f49c3aeb53ddf2f974978E, Sd2862168442040f1acfafcde07e4bb251, S0fb548da841642f099b26b1db282a725K, Secffe4812ef34a858e668234ba98a334q, Mini smart Switch, smart Switch, Switch |